Chip burning equipment - Third Generation F-Body Message Boards

Steved1257 · 11-01-2008, 12:40 PM

had this in the interior section figured he would be better
What i have is an ALDL cable for scanning cars(the type with the serial plug at the end), two C2 SST 27SF512 Chips, One D1 24-Pin Dip socket, One S2 Aries 28-pin Zif Socket, One G2 Memory Adaptor:0.60" leg spacing and the Burn1 Flash-n-Burn Usb based Chip programmer, plus the cd that came with it. i ordered the cable for ALDLcable.com and everything else came from moates.net I bought everything for close to $200 id like to get around $100 but make me an offer.
I never really got to use anything i bought before i sold my car so everthing is in new condition for my questions or pictures PM me, im located in Southington, Connecticut

Steved1257 · 11-02-2008, 09:30 AM

bump

87Formula391S/C · 11-02-2008, 10:35 AM

Im interested can this tune on the fly (while running)? And how old is it, as like when did you buy it? thanks..

Steved1257 · 11-02-2008, 10:47 AM

as far as i know the burner must be hooked up to a laptop im not really sure though if you can do it while it is running i dont really think you can. i bought this set up in july of 06 but i never really even used it and i sold my car last year

Six_Shooter · 11-02-2008, 09:43 PM

No, the above is used for non-real time tuning.

Datalog, read back through the datalog, change the variables that will put what isn't inline, where you want it, burn a chip, and then go for another drive.

The ALDL cable is needed even with real time tuning. Having a programmer and burning the final bin or good intermediate bin to a chip is always a good idea.

Steved1257 · 11-02-2008, 09:58 PM

Thanks for clearing that up i pretty much forgot everything about burning chips lol