I need to get this stuff sold so I can get another vehicle. If you feel the price is too high, do not be afraid to shoot me an offer. There is a reason why it says "obo". Please don't ask me what my bottom dollar is, because I'll tell you to read the ad. LS1/T56 setup, I do not wish to seperate the following parts - $4500 obo: 2000 Camaro SS LS1 Engine 2000 Camaro SS T56 Transmission 2000 Camaro SS LS1 ECU, tuned 2000 Camaro SS LS1 Engine Harness Ported MAF Ends Fluidamper Underdrive Harmonic Balancer MSD 8.5mm plug wires GMPP LS6 Camshaft 6.0L Exhaust Manifolds (currently not installed on the engine, but they do go with it) LS2 Flywheel LS2 Clutch and Pressure plate B&M short throw shifter Cold Air Intake setup 9" K&N Conical Filter 2000 Camaro Clutch master cylinder Braided line from master to slave 2000 Camaro brake and clutch pedal assembly B&M short throw shifter 2000 Camaro brake booster and master cylinder assembly 2000 Camaro dual electric fan setup Everything else: 2000 Camaro rearend, 3.73 gears, complete disc-to-disc - $300 2000 Camaro fuel tank, 255lph Walbro, complete with sending unit - $100 C5 Z06 wheels, 17x9.5/18x10.5, blacked out, tires are pretty worn - $600 Skulte wheel adapters, had them on the front of the car for the Z06 wheels - $100 Borla muffler with a portion of the over-axle pipe and SLP tips - $75 Custom made y-pipe, I spent $270 on this to clear the Spohn crossmember and to tie in with the 3" I pipe running to the muffler. - $150 82-92 dash pad, small crack on drivers side corner - $60 82-92 shifter bezel, with 6-spd logo applied - $40 82-92 center console, armrest cracked, everything else in good shape - $50 82-92 dash, great shape, no cracks not broken anywhere - $125 82-92 gauge cluster, 145mph speedo - $65 82-92 custom gauge bezel with all Autometer Ultralite gauges - $500 - 3 3/8" 200mph tach, setup for digital signal - 3 3/8" 10k RPM tach - 2 1/16" Fuel Level - 2 1/16" Voltage - 2 1/16" Oil Pressure 0-100 - 2 1/16" Water Temp 100-250 Pictures of all parts can be seen at: http://s402.photobucket.com/albums/p...0Camaro%20Z28/

price for the rearend including shipping to 04274?

If I remember right, it weighs around 240lbs, I can check what freight charges will be for it.

If I don't get this stuff sold, it's going to find a new home in my '83 Capri RS. Please help me unload it :P

EDIT: According to UPS, almost $300 to ship it.

PM sent.

i belive there is a company called r&l cariers that will do it for around 140 (ups and fedex are always overpriced) if you could get it to me for 400 including shipping i would take it

Highly interested in the '82-'92 shifter bezel. How is the boot on it?

Do you also have the rubber boot that mounts to the floor pan?

Hey I asked you about the gauges a while back, but never got a response. Still interested in selling them?

Hey saleen, did you ever get the engine dyno'd, if so could you post some numbers of it...how many miles are on the engine and tranny?

There is a small cut in the leather that you can't see when it's installed. I noticed it when I was cleaning it before I installed it. The rubber boot that I have for the bottom is from a 4th gen, I don't know if they are different.

Are you talking about the aftermarket gauges? I'd like to get $450 out of them, it cost me just over $600 to get all the gauges and the gauge panel. If you are talking about the stock gauge cluster, I thought I editted the ad, the one that I have is only an 85mph and the extra that I have is 115mph.

I never did get the engine dyno'd, I would estimate around 320whp in it's current form. There was ~75k on it when I got it, and I put another 8k on it, so I would say it's close to 90k miles on everything.

It looks like they are going to charge ~$115 for shipping. No offense, but I'm not going to lower the price on the rear end, I've seen completely stock with 3.42's going for more, so I think it's fair to ask $300 for a rear with 3.73's in it. If you would like to get it, my paypal addy is saleen85@yahoo.com

I'm interested in the complete set of autometer gauges, sending units and the panel that houses them. My zip is 12054, whats the best you can do shipped to my door?

I'll do $460 shipped. Shoot me a PM if you are interested.

PM sent

Would you seperate the fan setup? If so, how much to 50401?

how much to crate and ship the engine/trans setup to 98270

The cheapest I can find is $500.

i sent you a pm regarding the rear end did you recieve it?

Yes I did, however the battery died in my camera yesterday so I have to go get another battery before I can download the pictures you asked for.

ok sorry to bug you about it im just anxious to get rid of my stupid 2.77 open rear end when you got that qoute did they happen to say what terminal it would be shipping into?

Ok, got a new battery on the way to work this morning. Updated the pictures at http://s402.photobucket.com/albums/p...0Camaro%20Z28/

I do not remember what terminal it was going to come in at, however, I can check again. If you PM'ed me your zip code, I'll check when I get off work this afternoon.

bump TTT.

If this stuff is still here by income tax time, it's going into my '83 Capri RS. I know someone is looking for an LS1/T56 setup.

PM sent on shifter bezel...

Yes? No?

No, I'm not going to seperate the fan setup. I'm trying to keep all the engine related stuff together.

rearend has been sold.

Is just the tranny still available? Looking for a unit for my 87 Monte project. What is the low dollar w/ shipping to Spencer, MA 01562
If willing to seperate please get back to me
If interested please email @ zz4monte@charter.net
Thank you
Ron

Would you be willing to do a trade for the autometer speedo? Cash + ultralite mech. 160 speedo for your elec. autometer speedo?

Did you ever get my PM?

82-92 gauge cluster, 145mph speedo - $65

if you still have it, would you be interested in just selling the speedometer gauge? pm me

PM sent on gauges.

any interest in a running driving vehicle, in trade, for the stuff you didn't want to seperate?

namely the red t/a below in the sig

is the rearend sold Thanks

Price shipped on the LS1 fuel tank /. pump to K7R3L1 ON, Canada? PM Me, thanks!

Do still have the LS1 or the T56? Let me know, interested in both or separate.

Thanks

.....

Digging up threads that are 2 and 3 years old isn't going to get you the results you're after. If anything was a bargain, it's not going to be for sale 3 years later. Try finding some more recent threads, or go the tried & true route by contacting your local junk yard.