You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
well i have a petronix chrome tube style coil with less than 40k miles on it. I'll let go of it for 15$ shipped
i have a gp sorensen coil i used for one day (msd burn out on a sunday, jegs wasnt open)
15$ shipped. factory tpi/tbi styled
i have 2 used coils factory tpi/tbi styled for sale 10$ shipped for either
new hei msd cap and rotor kit , removed from packaging, but brand new never installed 25$ shipped.
pro comp hei styled distributor cap 15$ shipped.
msd super conductor 31659 part # over the valve cover sbc wires (for an hei setup) brand new never installed still have original packaging 55$ shipped.
thats the only picture of the msd harness i have its the direct plug in style for the tpi and tbi coil camaros.
cost 11 or 12$ new i'll let her go for 7.50 shipped it was only used a couple months.
the wires look exactly like a set off of jegs i pulled them out and layed them on the concrete and found out they were for hei..... i thought they were late model efi wires at the time i bought them.
so they look exactly like new with the new box and all.......
i can get more pics ,but they wont be very useful realy.......
also adding a tpi distributor ran great was on a jasper rebuilt 305 don't know if it was replaced when motor was or not.... either had 40k miles on it or 210k doubtful it has 210k because it looks good no corrosion to speak of and very very tight.
Mods so far: MSD Cap and rotor, MSD ignition coil, Accel 8.8mm ignition wires, Hooker Super Comp Shortie Headers, Flowmaster 3in catback, underdrive crank pulley, custom cold air intake, NOS wet 125 shot, air foil and a lead foot! no E/T's yet. ...TURBO COMING SOON...Other mods include keyless entry and remote start, and Sequential Turn Signals.
well i need a non a/c heater box, a good set of springs, retainers, and locks.
passengerside factory red mirror, driverside underdash panel also known as a hush panel, grey or black seat belts, tpi gasket set, rear disk brakes, a passenger side spindle. probably need more. let me know what you got.
I don't have parts now, but there are a few thirdgen Camaros and Firebirds at local junkyards. Do you need the spindle on its own? no rotor or A-arm? I'm pretty sure I can get a spindle and the hushpanels, I'll look for a red side rearview...
Mods so far: MSD Cap and rotor, MSD ignition coil, Accel 8.8mm ignition wires, Hooker Super Comp Shortie Headers, Flowmaster 3in catback, underdrive crank pulley, custom cold air intake, NOS wet 125 shot, air foil and a lead foot! no E/T's yet. ...TURBO COMING SOON...Other mods include keyless entry and remote start, and Sequential Turn Signals.
yah the mirror is realy no big deal if you could get a spindle and hush panel i'd trade you even you pay for shipping and i pay for shipping on my side.
ok, sounds good, I'll go to the junkyard on Sat and get the spindle and hushpanel... Any specific year for the Camaro hushpanel?
just to be clear, this is the part you need, right?
Mods so far: MSD Cap and rotor, MSD ignition coil, Accel 8.8mm ignition wires, Hooker Super Comp Shortie Headers, Flowmaster 3in catback, underdrive crank pulley, custom cold air intake, NOS wet 125 shot, air foil and a lead foot! no E/T's yet. ...TURBO COMING SOON...Other mods include keyless entry and remote start, and Sequential Turn Signals.
the style i need is for an 89 iroc-z i could use the fuse panel cover that attaches to the hush panel as well let me know if you can get them that would be great.
ok. no problem. I'll let you know by Sat night if I'm successful. I'm pretty sure I can get the hushpanel, there's plenty of Camaros. My concern is getting a breaker bar to get that spindle off!
Mods so far: MSD Cap and rotor, MSD ignition coil, Accel 8.8mm ignition wires, Hooker Super Comp Shortie Headers, Flowmaster 3in catback, underdrive crank pulley, custom cold air intake, NOS wet 125 shot, air foil and a lead foot! no E/T's yet. ...TURBO COMING SOON...Other mods include keyless entry and remote start, and Sequential Turn Signals.
yes they can be a pain hopefully you have good luck though.
unfortunately a previous owner let a ball joint go realy realy realy bad....... then drove on it forever.
at the time i just thought it was ball joints and i didnt feel like fixing them, therefore for 100 bucks i had sears do it. much to my dismay i put brakes and struts on it this year to find out the bad ball joint massively wallered out the hole for the steering knuckle dip **** didnt even tell me it was bad. so now i get to pull it all off again unfortunately.
still looking to get rid of this stuff.... money talks.....
i am also looking for a good set of modified 081 heads, upper center console trim, lower black plastic center console, passenger side spindle, passenger factory red powered mirror with decent paint, a tpi gasket set, head bolts, good springs locks and retainers capable to .525 lift, non ac heater box probably need other stuff to so yes i am open for trades
pm'd you i had a screw up and sent the wrong part to the wrong person just got her back in my possesion 2 days ago i'll be reawaiting your address thanks.
