PICTURES ADDED TO BOTTOM WC-T5 setup, 3k on rebuild, shifts perfectly, no grinding, B&M shifter, bellhousing, clutch fork, clutch (5k on new clutch/pressure plate), master/slave cylinders, throwout bearing (still in car, swapping in T56 in 2 weeks, will be removed then), pick-up/meet, Make offer nonWC-T5, gears 1-4 work perfectly, won't go into 5th, was driving along and went to shift into 5th, wouldn't go, nothing exploded, no grinding, includes bellhousing and clutch fork, may have a T/O bearing as well, comes with stock shifter, pick-up/meet, Make offer Complete 4-bolt crate 350 engine, approximately 30k miles, runs strong, took my Camaro to a best time of 9.51 in the 1/8th at 76mph. Uses some oil due to bad valve seal on cylinder 6, otherwise in great running order. Don't know specs of engine, includes Edelbrock Performer intake with carb adapter/spacer. $600 obo picked up LT1 flywheel, nice condition, needs to be resurfaced, $80 shipped T/A Firebird dash map pouch, nice shape, $15 shipped Stock rear lower control arms, pick-up, $10 Stock steel driveshaft, pick-up, $20

I know someone wants a nice, freshly rebuilt World Class T5 swap...

Pictures:

bump

How much you lookin to get for the WC setup?

Do you have a master/slave hydraulic assembly availble as of now?

I'll send you a pm.

Sorry, the only setup I have is in the car. If it doesn't go with the setup, then I'll have it available. I'll let you know.

do you still have either of the t-5's?

I actually still have them both. Let me know what you need.

I need a wc t5 to replace my broken one how much are you wanting for your set up? thanks Bryan

I have the following parts available from the WC-T5 setup ready for pickup today: WC-T5 transmission, B&M shifter, bellhousing, clutch disc, pressure plate, flywheel, throwout bearing, mounting hardware. The hydraulics are shot and cannot be used.

I also still have the non-WC T5 and much of the parts in the list above.

WC-T5 setup: $500
non-WC setup: $250

I would prefer these to be picked up. Shipping is a real pain...

how much for the WC t-5 i don't need the bell housing or pressure plate and anything just the trans shipped to 49001 Kalamazoo MI i would have no problem pay for the shipping if the price is rite

If I don't get someone that will offer to pick this up soon, I will consider shipping, but I really would prefer not to.

bump!

how much for just a bellhousing shipped to 16508?

MORE ITEMS ADDED INCLUDING 350 ENGINE COMPLETE

Last chance for the complete setups before I split these up. I have interest in part-outs.

More pictures:

WC-T5 with B&M shifter


non-WC T5 with stock shifter


Stock clutch disc, flywheel, pressure plate, also LT1 flywheel pictured


350 Engine

Somebody needs a perfect transmission or an engine, I know it!

WC-T5 sold pending payment on ebay.
Clutch, pressure plate, flywheel all sold.
1 bellhousing sold.

still have a bellhousing, non-wc t5, B&M shifter, and complete 350 engine.

How much for a bellhousing shipped to 61087?

sorry hit the button twice

Sent ya a PM

Did the ebay buyer back out on the WC T5?