You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Borg-Warner 9 bolt differential 3.27 gear complete with calipers, sway bar, and e-brake cables.....SOLD
L-98 Cast Iron Heads Assembled with valves and Comp Cam Springs $200.00
Dart Iron Eagle Heads assembled with 2.02 intake and 1.60 exhaust, dual springs and 72 cc chambers.....SOLD
Cast Iron Small Block intake manifold for Quadrajet Carb $30.00
Unassembled 305 Heads with valves and springs $75.00
400 small block – bare block with 2-bolt main caps $100.00
5.7L short block – needs rebuild $250.00
Comp Cams Hydraulic Roller Retro Fit Cam # 12-423-8 XR 276 HR. 0.502"/0.510" lift, 276 / 286 duration, 110 Lobe separation with Crane Cam retrofit Hydraulic Roller Lifters . $300 for the package
Set of 8 Small Block 400 Connecting Rods $50.00 for the set
Bare LT1 intake manifold $50
LT1 pistons and rods, stock bore, nice shape Set of 8 $50
LT1 Throttle body $50
Pay pal or cash. Prefer local pick-up if possible to avoid hassles of shipping. Prices do not include shipping. All parts are located in Ft Lauderdale, Florida zip - 33309.
__________________ 1986 Z-28, A little 'ole
"305", Self-shifter, 165 ECM, Marvel Mystery Chip....
"Drive it Like You Stole It"
Last edited by Br1dgeman; 09-09-2009 at 09:27 AM.
Reason: update list
Can I have more info on the heads? Part numbers, runner volume, and valve sizes? I have a healthy 406 with S/R Torquers on there now... are these heads better?
Re: Heads, Cam, Blocks, Rods and 9 Bolt Differential For Sale
Quote:
Originally Posted by Br1dgeman
400 block has stock bore with light ridge at top of cylinders. It will probably need a slight overbore.
PM sent
pm sent
__________________ 1986 Camaro Iroc-Z 350 TPI Corvette motor 700r4 trans, BMR strut tower brace,BMR adj.Panhard Rod,Energy Sway Bar links,Eibach Pro Kit,J&M street lower control arms,Accel Distributer,wires.Blacked out all lights.5% Limo tint all the way around.
They are standard factory cast iron L-98 heads. 64 cc chambers with 1.94/1.50 valves. They have comp cam 981 springs installed and new seals. The heads also have the "canted" middle intake bolts.
