i was lucky enough to win a brand new edelbrock 600 (chrome!) in a door prize. so i have bee using one, but had the other laying around as a back up. i also have a rebuild kit that will work for either of these. they certainly arnt show material but im sure if you took a scotch brite to them they would clean up nicely. the one that was on my car has no problems what so ever. no leaking, no hesitation etc. its a manual choke, but choke was just opened up all the way full time. all you have to do is disconnect the bar that holds it open. t the other carb leaked in the back bowl, i took off the bowl and found a torn gasket. so i bought a rebuild kit. before i rebuilt it i found another carb and got it (free) and it worked good, so i threw this carb and the rebuild kit to the side until i needed it. the carb that runs good had a leak in the back bowl after a while so i opened the kit up and took out one gasket. not a probem since well since i got the new edelbrock i figure i shouldnt need another carb for awhile and theres no use to have 2 carbs just laying around so they're for sale. the one that runs great with no problems is - $75 the one that leaks is - $30 the rebuild kit minus a back gasket - $30 if you buy a carb AND the rebuild kit then the kit goes to - $20 shipping to lower 48 states only. havent checked shipping but itll prolly be around 15 bucks or so.

do you know how many miles you got on the one that works

no idea. i bought it used but i can honestly say ive put 3000 miles on it and only had to change that gasket. it works flawlessly, but if i ever bought a used carb id rebuild. only reason i DIDNT is cause i got them both from my grandpa and they were free. so when it would stop working i would just go get another one off him.

i would trust it to work on my car. id go from illinois to callifornia in a heartbeat. (but thats just me)

no matter what, your still buying a USED carb. thats why prices are pretty low.

Do you have any pictures send them to castrorodolfo28@yahoo.com

pics will be sent tomorrow night. i have a cruise in tomorrow so itll be a little later in the night but ill get them to you. thanks for interest.

ok thank you

hello, i would like to have the broken one. this is a holley not a edlbrock you are selling? how much to ship to virgina.

ill check on the virginia shipping for you on monday morning. shouldnt be more than 10-15 bucks though. JR350tpi ill have pics to you in bout 20 mins. sorry its been so late, long effing day.

this is the one that works. it drives fine and everything. if you want it let me know.

heres the one that leaks. obvious why it leaks its missing a bolt in the back bowl there. if you still want it let me know and ill get it shipped out.

thanks guys.

btw there isnt another replacement bolt in the rebuild kit although im sure you could get one at autozone oreillys etc.

Do you know to which intake this will bolt on too

itll bolt on to a lot of different intakes, if you had TBI then youll have a quadrojet intake, all you gotta do is get the adapter plate for it which is like 15 bucks. and i have one if you need it. what intake do you have? you can get an edelbrock performer intake for about 80 bucks used.

if you need an adapter plate ill throw it in with the carb. i just need this stuff gone.

I have a tbi if you give me the plate i would appreciate it because i also planning on putting a 350 into my engine

yeah ill give it to ya. ill check shipping charges tomorrow morning and have a quote for you.

thanks again.

idk where your located but i got a rough quote. about 16 bucks for parcel post (7-10 days) or 29 bucks for priority mail (2-3 days)

My zip is 90650 also i was wondering that what is the part number the carb for i could look for a rebuild kit and is it electric shoke or manual

its manual choke, and i have rebuild kit for it. rebuild kit cost ~40 bucks. this ones for 30. ill throw it in for another 20 bucks though. its complete minus the back bowl gasket, which is currently on the carb your looking at.

Never mind man i am just gonna stay with the tbi its to much work to go with carb.
Sorry and thank you for all the your time

yep

well these are still for sale.

90 shipped for the one that works
45 shipped for one that doesnt work
if you want the rebuild kit with it ill throw it in for free.

Nvm. Free bump

I think i will still buy it from you what else would i need to install this into my engine

all you need to get it on there, is the adapter plate (included) and a new carb to adapter pate gasket (or you can buy a brand new adapter plate for 15 bucks with all the gaskets included from any auto parts store. (just ask for quad-jet to holley adapter)

OK so let me get the rest of the stuff from going to carb i am doing a search right now what else would i need i am also getting a edelbrock intake

thats good, the carb will bolt right up to to the intake without a carb adapter. these carbs arnt going anywhere i was going to throw them on ebay but if you plan on buying it ill hold onto it for you. thanks

Ok thank you let me find out first but i fyou want put it on ebay if you could make more money out of it. I am also thinking of the edelbrock one have you have any problems with that one.

nope no problems so far, but the holley is much older than the edlebrock and it runs just as good as the edelbrock does. only reason i went with edelbrock is cause it was chrome, and it was free. the carb will still be here, i dont like dealing with ebay and id rather help out somebody on thirdgen then somebody on ebay.