cam and intake for sale - Third Generation F-Body Message Boards

mark 87gta · 07-19-2009, 09:47 PM

i have a used cam and intake when i say used it has about 6 hours on cam and intake. the cam is a cam motion hydralic roller cam specs on the cam are lobe lift is .338 on intake and exhaust valve lift is .507 on intake and exhaust lobe separation is 112deg intake centerline is 108deg the intake is a ZZ4 intake dual plane for 23deg small block chevy heads also included is the egr block off plates and anything else i have for it this combination of cam and intake with my 355 with 12.5 to 1 compression made 430 hp on the dyno i got greedy and wanted more so the only time on these parts is the dyno time i paid close to 600 dollars for these parts im asking 300obo any question email me at mark81004@aol.com thank you

vetteoz · 07-19-2009, 10:01 PM

Quote:

Originally Posted by mark 87gta

cam lobe lift is .338 on intake
exhaust valve lift is .507 on intake
exhaust lobe separation is 112deg
intake centerline is 108deg

So intake and exh are both .507 lift? (338 lift at lobe = 507 lift at valve)
What is the duration @ .050 lift?

mark 87gta · 07-20-2009, 04:45 PM

my cam card dont really specify a duration but go to cam motions web page the part number for the cam is x2202-12 and it did sound very lopey

mark 87gta · 07-20-2009, 04:47 PM

also forgot to mention it works great with fuel injection

vetteoz · 07-21-2009, 04:50 AM

Quote:

Originally Posted by mark 87gta

my cam card dont really specify a duration but go to cam motions web page the part number for the cam is x2202-12

Site only lists LS cams

If cam card has info you list above , it must have either advertised duration or duration @ .050 listed

mark 87gta · 07-22-2009, 07:56 PM

well sorry for the confusion i promise its not an ls cam i used it in my small block and i no its a hydralic roller thanx for looking