You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I will be making myself a set in the next couple of days for my own swap and will make a few sets if anyone is interested.
They will be made of 5000 PSI Hydaulic Hose with a 90 end on the power steering box side and a straight end on the pump side. Will be made with 3/8 hose which is the same size as 6an. You will need the two adapters that thread into the power steering box and pump to connect these lines. I can make likned with the proper o-ring fitting on the ends but would cost more.
Will do them for 40 buks a hose that is for a 5 foot long or 45 for a 6 foot.
I will post some pics up later. If there is anyinterest Lmk because I will not do this again just thought I would help out fellow third gen members.
Factory mounting position. If you have the pump somewhere else Just measure the length of hose you need. I have acsess to hydaulic equipment to make the hoses at my shop.
The reervoir does not need any kind of pressure line. These lines I have made will work with the pump monted on the passeger side where it was mounted factory over to the powere steering box. I can make complete kits if someone wants. That would include all the adapters and hoses. All the work is done for you. I forgot to mention the hydarulic hose is also flame resistant.
We use these on all the big John Deere farm tractors and I have yet to see a failure.
I can make fuel lines as well. I will look into the best hose for that application but I can make what ever you guys need.
