New Pricing below as well as pricing for individual items. I have several parts that I need to sell as I am going in a different direction with my car. Below is a list of everything that needs to go. Pictures are available if you are interested. I would like to keep the items grouped together as follows but will consider selling items individually. With the exception of the short block, none of the items below have been used. That means that only the short block has been used. Mini Ram Intake (part# 1205), TPIS F Body fuel rail kit, This is the complete setup and includes 48mm TB, filler neck, etc, pricing is as follows: Mini Ram - $ 750 Fuel Rail - $ 250 Throttle Body - $50 Injectors - $150 - SOLD Dart Pro 1 200cc/64cc Cylinder Heads (angle plug for use with 87 and up blocks), Scorpion 1.6 Roller Rockers, and Proform Chrome Valve Covers with Wing Nuts (WAS $1200, NOW $1100). The heads are assembled and ready to use. Individually these would cost you at least $1600 before tax and shipping. If you want these individually, then pricing is as follows: Dart Pro 1 Heads - $900 SOLD Scorpion 1.6 RR - $ 200 SOLD Proform VC's - $100 SOLD Hawks Thirdgen Long Tube Headers with Y pipe (WAS $900, NOW $850). This includes the Y pipe and associated hardware. There is a dimple in the #3 tube to provide clearance for the spark plug. These headers normally run $1049 before shipping. Vig 9.5" 3600 RPM Torque Converter - $ 675 700R4 Transmission - $250 - SOLD Mini starter (WAS $150, NOW $125) - needed due to the headers. These generally run $200 or more. L98 Factory Roller Short Block ~ 15k miles; comes with the following items ($400): - SOLD *CC306 Hybrid Cam (230/245 .544/547 w/ 1.6's 113LS) *TWR 2490L Forged Pistons *Reconditioned Stock Rods *Reconditioned Stock Crank (turned 10/10) *Melling Hi Vol/Hi Pres Oil Pump *Canton Road Race Oil Pan. (F-Body Pan) NOTE: A new Canton oil pan would run you $320 before tax and shipping, and a USED one generally fetched about $200. I also have the accessory bracket, alternator, AC compressor, water pump, etc. Make me an offer that is reasonable. E

71 views and no one is interested in anything listed here?

Do you have any pictures of the mini ram. I would be interested but probably wouldnt want the throttle body or injectors if willing to sell seperate.

1lecamaro I do have some pictures. Send me an email address and I will email you some pics.

E

pics of the tranny , and what your bottom dollar shipped to Ettrick Wi 54627. barbienles@msn.com

emails have been sent.

E

All items are still available.

any pics of the short block? you can use nascarwrench@yahoo.com . what is the shape of the internals?

All items are still available.

bumping it back up. All listed items are still available.

Who doesnt want a new mini ram and aluminum heads? Or even thirdgen specific long tube headers, mini starter, rebuilt transmission with a Vig 3600 rpm stall speed?

Its all available still...either all together or individually.



E

NEW PRICING

473 views...

yo i need headers and tranny whats the best ull take i really neeed a tranny tho let me no

yea pics would help and you need to come down a bit on prices, 10% for new never used parts and 35% for like new used parts and 50% for used parts thats about the norm. Been dealing in 3rd gen stuff since 1997 and go to Carisle Pa for every show from spring swap meet to the fall swap meet, which is soon. GLWS

Agreed, no offense but all of this stuff wouldve sold long ago if your prices werent high as hell.

bucknasty, the best for the headers and tranny = $1100 plus shipping.

ScottyRock and 84'BATA = If you think the prices are too high for items that have never been used, yet are priced less then brand new, then please shop elsewhere. Maybe you can go to Carlie and find this stuff at a better price. As for pictures all you have to do is ask. Thanks for looking though.

Bump for good looking headers

I am very sorry I hurt your feelings I was just trying to help you move your parts, almost 600 veiws, come on...Thank you very much for the pics of the headers they look nice ,but for that price I can get NEW Coated Hookers Long Tubes from Summit. GLWS though

do you still have the free stall change coupon for the Vig 9.5" Torque Converter

also what spline? and is it a single disc lockup??

ScottyRock, there are no hurt feelings. I appreciate the help in trying to move parts but there is a difference in getting a fair price versus just giving it away. I know that most of the views are from people just looking.

SLP-GTA, I no longer have the free stall change. The Vig is a single disc lock-up torque converter for a 82-92 700R4. I don't know what the spline count is. All I can tell you is that it fit with no issues when I test fitted it on the transmission after I received it.

The short block and transmission have been SOLD!!!

Some good stuff still available at some prices.

Injectors are pending sale.

Dont miss out on the other great items for sale.

Interested in the heads/rockers. You got any pics of the Pro1's? Chamber cc? Are these the older pro1, or newer platinum versions?

Rizzle
PM Sent

Injectors are SOLD

Some really good stuff still available at some really good prices.

1003 views

Good deals still to be had.

There are some folks who are interested in the Mini Ram and the Dart Pro 1 heads. Dont let these good deals be lost.

Hi i am interested in the mini ram, and was wondering if you know what part number yours is?

For everyone else who is interested, the mini ram is part number 1205.

I never did get any pictures of the heads

What do you take for the heads, 1.6 rr and valve covers?
I'm very interested.
How could I pay? I can pay with paypal or a money wire transaction.

catc sorry about that. I sent the email but did not attach the pics.

69cyclone, $1100 for the heads, rocker arms, and valve covers.

1,205 views.

What brand is the mini starter and is it a straight or offset bolt pattern?

Thanks,
Adam

Clemson327, pm sent.

bump

Can you send me a couple of pics of the longtube headers and y-pipe? That is the set I am interested in but I am looking at December before I can get them, so if you still have them I will contact you to see if you do.

CC send me an email address.

PM sent..

1,376 views. One of you must see something you want and have the money for.

You would be crazy if you let these deals go.

Some good stuff still available.

1,466 views and I still have stuff for sale...

C'mon someone here wants (i.e. needs) a mini ram and Dart Pro 1 heads.