#1 Junior Member
Join Date: Feb 2006
Location: Mullica hill New jersey
Posts: 18
Car: 94 blazer, 1985 berlinetta
Engine: 4.3, 5.7
Transmission: 700r4
Axle/Gears: 3.73 and soon to be 3.73 posi
350 4bolt main and 700 r4 $600
I have a 350 4 bolt main motor (jasper rebuild?) complete from carb to pan. It is bolted to a 700r4 trans which has a b&m shift kit.
#2 Member
Join Date: Aug 2007
Location: Panhandle of Florida
Posts: 122
Car: 85 IROC-Z / 92 Z28 Vert
Engine: L69 / LB9
Transmission: T5 / A4
Axle/Gears: 3:73 / 3.73
Re: 350 4bolt main and 700 r4 $600
Where are you located at?
#3 Junior Member
Join Date: Feb 2006
Location: Mullica hill New jersey
Posts: 18
Car: 94 blazer, 1985 berlinetta
Engine: 4.3, 5.7
Transmission: 700r4
Axle/Gears: 3.73 and soon to be 3.73 posi
Re: 350 4bolt main and 700 r4 $600
Im in mullica hill. Its about 20 minutes outside of philadelphia
#4 Member
Join Date: Feb 2004
Location: NJ
Posts: 152
Car: 2002 Silverado 2500HD,1986 Camaro
Engine: 383 Stroker
Transmission: TKO600
Axle/Gears: 4.10
Re: 350 4bolt main and 700 r4 $600
how much for just motor? would you considering just selling block
#5 Junior Member
Join Date: Feb 2006
Location: Mullica hill New jersey
Posts: 18
Car: 94 blazer, 1985 berlinetta
Engine: 4.3, 5.7
Transmission: 700r4
Axle/Gears: 3.73 and soon to be 3.73 posi
Re: 350 4bolt main and 700 r4 $600
I will take 400 for just the motor, 350 if I keep the distributor, carb, plug wires, and accessorys.
#6 Junior Member
Join Date: Feb 2006
Location: Mullica hill New jersey
Posts: 18
Car: 94 blazer, 1985 berlinetta
Engine: 4.3, 5.7
Transmission: 700r4
Axle/Gears: 3.73 and soon to be 3.73 posi
Re: 350 4bolt main and 700 r4 $600
#7 Member
Join Date: May 2007
Location: CT
Posts: 127
Car: '88 Iroc-Z z28 Camaro
Engine: Carb 355
Transmission: t5 5-speed
Axle/Gears: 4.11
Re: 350 4bolt main and 700 r4 $600
stock 350? how many miles?
#8 Senior Member
Join Date: Aug 2002
Location: Calvert Co. Maryland
Posts: 369
Car: 91z28
Engine: 5.7 l98
Transmission: AT :(
Re: 350 4bolt main and 700 r4 $600
any casting numbers? 1 piece rear main seal or 2?
#9 Junior Member
Join Date: Feb 2006
Location: Mullica hill New jersey
Posts: 18
Car: 94 blazer, 1985 berlinetta
Engine: 4.3, 5.7
Transmission: 700r4
Axle/Gears: 3.73 and soon to be 3.73 posi
Re: 350 4bolt main and 700 r4 $600
Its a stock 350 with about 80,xxx miles. Not sure if 1 or 2 peice rear main. I will grab the casting number tomorrow before I go to work
#10 Senior Member
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 692
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 4bolt main and 700 r4 $600
if you know what year it replaces should tell you 1 or 2 mostly 87 and up are 1 peice
__________________
u call it "drifting"? i call it a lack of proper traction, the fastest way around the track isnt sideways with the tires smoking (well, most of the time). oh yeah japan makes the best race
bikes , but the cars are for transportation.
and thats, your new opinion!
my build thread:
http://www.thirdgen.org/techboard/en...block-zz4.html
#11 Junior Member
Join Date: Feb 2006
Location: Mullica hill New jersey
Posts: 18
Car: 94 blazer, 1985 berlinetta
Engine: 4.3, 5.7
Transmission: 700r4
Axle/Gears: 3.73 and soon to be 3.73 posi
Re: 350 4bolt main and 700 r4 $600
the casting on the back of the block is 3970010. should be a 2 peice rear main. Mortec.com says 69-80. This was also the casting used for the dz 302 in the 1969 z28.
#12 Junior Member
Join Date: Feb 2006
Location: Mullica hill New jersey
Posts: 18
Car: 94 blazer, 1985 berlinetta
Engine: 4.3, 5.7
Transmission: 700r4
Axle/Gears: 3.73 and soon to be 3.73 posi
Re: 350 4bolt main and 700 r4 $600
#13 Junior Member
Join Date: Feb 2006
Location: Mullica hill New jersey
Posts: 18
Car: 94 blazer, 1985 berlinetta
Engine: 4.3, 5.7
Transmission: 700r4
Axle/Gears: 3.73 and soon to be 3.73 posi
Re: 350 4bolt main and 700 r4 $600
500 for pair. need these gone
#14 Junior Member
Join Date: Feb 2006
Location: Mullica hill New jersey
Posts: 18
Car: 94 blazer, 1985 berlinetta
Engine: 4.3, 5.7
Transmission: 700r4
Axle/Gears: 3.73 and soon to be 3.73 posi
Re: 350 4bolt main and 700 r4 $600
nobody wants to build a performance motor or swap out their old tired 305? MAKE AN OFFER!!!
#15 Senior Member
Join Date: Apr 2007
Location: The Pocono Mountains, PA
Posts: 692
Car: 1987 Firebird, Dad bought it new
Engine: 5.7L Vortec w/ LT4 Hot cam
Transmission: 700r4 transgo shiftkit 2600 stall
Axle/Gears: 3.42 '02 SS 6 spd rear
Re: 350 4bolt main and 700 r4 $600
if it was a 1 pc rear main seal you wouldnt have it now, if you know of any i know alot of ppl who need em
__________________
u call it "drifting"? i call it a lack of proper traction, the fastest way around the track isnt sideways with the tires smoking (well, most of the time). oh yeah japan makes the best race
bikes , but the cars are for transportation.
and thats, your new opinion!
my build thread:
http://www.thirdgen.org/techboard/en...block-zz4.html
ThirdGen
1992 Camaro
Paid Advertisement
Tags 350 , 4bolt , 57 , 700 , 700r4 , blockcom , complete , cost , engine , jasper , kit , main , motors , rebuild , rebuilt , sale , trans
Thread Tools Search this Thread
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
and thats, your new opinion!
