You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i have a set of killer huge front brakes that will fit 82-92 camaro or firebird, the rotors/calipers are 13 inch from a c-5 vette, i am selling the whole set-up complete less brake hoses, it has all been on a car and was working great, all thats needed to install is turn the rotors and get a set of braided brake lines, i took it all apart and cleaned all the grease off everything, they will need new inner seals but i still have the old ones to make sure you get the right ones, 360.00 for all of it as pictured and i will include shipping to the lower 48 ,i have more pics if needed, Jim 850-983-6944
Aren't those LS1 calipers? The C5 calipers have the stiffening ribs going all the way across the top of the caliper. Are those aluminum hubs? Can I get part numbers on the stuff? Are the rotors still going to be usable after being turned down or do they definitely need to be replaced? Have the rotor ever been turned down before?
__________________ Suspension - far from stock, Brakes - far from stock Drivetrain - upgraded, Engine - bolt ons
yes, i have the whole set-up, but i could only post one pic i have plenty more, the hubs are aluminum and the rotors are still very thick, i dont think they have ever been turned and they will still be very good after they are turned, i will be at the shop from 10-3 today, Jim 850-983-6944
