Home Register FAQ Members List Photo Gallery Garage Search Today's Posts Mark Forums Read Vendors



Go Back   Third Generation F-Body Message Boards > Classified Boards > Parts for Sale > Engine/Drivetrain/Suspension Parts for Sale
Reload this Page 9 Bolt Machined Posi Cones... $45 shipped
Sign in using an external account
Register Forgot Password?

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools Search this Thread
Old 10-11-2009, 05:40 PM   #1
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
9 Bolt Machined Posi Cones... $45 shipped
I have a set of Machined Posi cones for a 9 bolt. I was going to use these, but don't have the time and I need the money.

I machined off .25 inch off the outer lip, then I machined the inner surfaces till the grooves were gone. These should work great.




Edit: I am asking $25 shipped to the 50 states.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Last edited by Bullydawg; 01-21-2010 at 12:37 AM.
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-11-2009, 07:43 PM   #2
Junior Member
 
Join Date: Apr 2009
Location: Michigan
Posts: 1
Car: 89 Iroc Z-28
Engine: 5.7 350 TPI.
Transmission: 700r4
Axle/Gears: Borg Warner 9bolt 2.77

Classifieds Rating: (0)
Re: 9 Bolt Machined Posi Cones... $60
since you machined them im taking it that you are going to have to use shims now?
89irocz28350 is offline vBGarage Page   Reply With Quote
Old 10-11-2009, 10:13 PM   #3
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
That is correct. In order to rebuild a 9 bolt, you are going to have to shim it either way. I have quite a few shims ill throw in. I remember finding shims for like $30 or so...
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-12-2009, 01:04 AM   #4
Supreme Member
 
Brisk's Avatar
 
Join Date: Jul 2004
Location: Beautiful BC
Posts: 2,590
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23

Classifieds Rating: (25)
Send a message via ICQ to Brisk
Re: 9 Bolt Machined Posi Cones... $60
very interesting, how much life do you think those cones will have?
__________________


- Chris -

Check my vBGarage for Mods - currently updating, check it out and leave a comment!
Brisk is offline vBGarage Page   Reply With Quote
Old 10-12-2009, 01:54 AM   #5
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
Depends on alot of things... How bad your carrier is worn, how often you burnout in the rain (9 bolt killer) and how well you shim everything.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Last edited by Bullydawg; 10-12-2009 at 02:02 AM.
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-12-2009, 10:36 AM   #6
Junior Member
 
Join Date: Apr 2009
Location: Michigan
Posts: 1
Car: 89 Iroc Z-28
Engine: 5.7 350 TPI.
Transmission: 700r4
Axle/Gears: Borg Warner 9bolt 2.77

Classifieds Rating: (0)
Re: 9 Bolt Machined Posi Cones... $60
yea i found out the hard way how to kill a 9bolt posi cones in the rain, how much for everything shipped to freeland michigan 48623
89irocz28350 is offline vBGarage Page   Reply With Quote
Old 10-12-2009, 12:54 PM   #7
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
$65 Shipped...
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-13-2009, 04:33 PM   #8
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
bump!
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-16-2009, 02:33 AM   #9
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
TTT
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-16-2009, 06:37 PM   #10
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
ttt.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-17-2009, 03:17 PM   #11
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
Bump $55 Shipped
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-18-2009, 11:51 PM   #12
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
bump
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-21-2009, 09:36 PM   #13
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
Still for sale!
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-24-2009, 04:55 PM   #14
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
$45 shipped.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-24-2009, 05:09 PM   #15
Supreme Member
 
Twin_Turbo's Avatar
 
Join Date: Jun 2000
Location: Enschede, Netherlands
Posts: 2,990
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27

Classifieds Rating: (19)
Send a message via AIM to Twin_Turbo
Re: 9 Bolt Machined Posi Cones... $60
I'll take them if you have paypal and are willing to ship international. Of course I understand 45 shipped is a no go w/ int. shipping so how about 40 + actual shipping?
__________________
Twin_Turbo is offline vBGarage Page   Reply With Quote
Old 10-24-2009, 11:40 PM   #16
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
Ill ship them to you. PM me.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 10-25-2009, 03:48 PM   #17
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
bump
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 11-11-2009, 02:51 AM   #18
Junior Member
 
Join Date: Apr 2008
Location: Mount Vernon Ohio
Posts: 13
Car: 06 GPRIX GXP & 89 FORMULA 350

Classifieds Rating: (2)
Re: 9 Bolt Machined Posi Cones... $60
Still Available? Please PM Me Thanks
__________________
Guaranteed not to"Slip, Drip, Rust or Collect Dust!"

My Formula: http://www.fquick.com/garages/Pontia...la/1989/25746/
GreatDaneGTP is offline vBGarage Page   Reply With Quote
Old 11-20-2009, 02:14 AM   #19
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
Bump... packaged and ready to go now!
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 11-21-2009, 06:25 PM   #20
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
TTT.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 11-24-2009, 12:36 AM   #21
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
Bump!
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 11-24-2009, 06:00 PM   #22
Senior Member
 
Join Date: Apr 2006
Location: newark, De
Posts: 373
Car: 85 trans am
Engine: 383 stroker
Transmission: 5 speed
Axle/Gears: 9 bolt rear 3:70

Classifieds Rating: (2)
Send a message via AIM to white85transam Send a message via Yahoo to white85transam
Re: 9 Bolt Machined Posi Cones... $60
i this all the cones needed to rebuild? if so i am very interested. price shipped to 19702 thanx
white85transam is offline vBGarage Page   Reply With Quote
Old 11-24-2009, 06:06 PM   #23
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
You may need some shims... Ill give you all the shims I have which should be enough.. not positive though.

$45 shipped.

I mean I spent alot for a full set of shims, and I got the cones... I just don't need these, and want them to go to good use.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 11-24-2009, 07:24 PM   #24
Senior Member
 
Join Date: Apr 2006
Location: newark, De
Posts: 373
Car: 85 trans am
Engine: 383 stroker
Transmission: 5 speed
Axle/Gears: 9 bolt rear 3:70

Classifieds Rating: (2)
Send a message via AIM to white85transam Send a message via Yahoo to white85transam
Re: 9 Bolt Machined Posi Cones... $60
do u have paypal? also how close to a new one are they?
white85transam is offline vBGarage Page   Reply With Quote
Old 11-24-2009, 07:40 PM   #25
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
The cones haven't been used since I machined them.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Last edited by Bullydawg; 11-29-2009 at 10:53 PM.
Bullydawg is offline vBGarage Page   Reply With Quote
Old 11-29-2009, 10:53 PM   #26
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
Still have them... Bump
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 12-14-2009, 11:21 PM   #27
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
bump!
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 12-18-2009, 01:52 PM   #28
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
Bump... Make an offer. I guess nobody is rebuilding their 9 bolts..
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 01-05-2010, 02:05 AM   #29
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
TTT
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 01-05-2010, 03:44 PM   #30
Senior Member
 
Join Date: Feb 2003
Location: Albuquerque, NM
Posts: 1,218
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength

Classifieds Rating: (26)
Re: 9 Bolt Machined Posi Cones... $60
Does it matter which series of carrier is being used? Will this work with all series?
wesilva is offline vBGarage Page   Reply With Quote
Old 01-05-2010, 05:23 PM   #31
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
I am pretty sure it works with both 2 and 3 series carriers.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 01-07-2010, 04:31 PM   #32
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
TTT... These are just taking up space... I will include all the shims I have to help you rebuild your 9 bolt posi.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 01-08-2010, 01:34 PM   #33
Senior Member
 
PF Flyer's Avatar
 
Join Date: May 2001
Location: Germantown, MD USA
Posts: 429
Car: 87 T/A
Engine: TPI 350 ci
Transmission: 5 speed

Classifieds Rating: (0)
Re: 9 Bolt Machined Posi Cones... $60
45 bux shipped - I'll take them, w/shims

Just need an address.

My email is mike@pf-flyer.com

Thanx
__________________
A blue & grey '87 Pontiac Trans Am
PF Flyer is offline vBGarage Page   Reply With Quote
Old 01-08-2010, 03:17 PM   #34
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
My Paypal is XXX . They are boxed and ready to go.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Last edited by Bullydawg; 10-03-2011 at 08:25 PM.
Bullydawg is offline vBGarage Page   Reply With Quote
Old 01-10-2010, 02:07 PM   #35
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
Bump...
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 01-11-2010, 01:17 PM   #36
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
TTT again.
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 01-21-2010, 12:24 AM   #37
Supreme Member
 
Bullydawg's Avatar
 
Join Date: Nov 2006
Location: Chico, Ca/ Misawa, Japan
Posts: 2,956
Car: 1988 Formula 350
Engine: 5.7
Transmission: Slipping 700r4
Axle/Gears: Knockin' 9 Bolt 3.27

Classifieds Rating: (5)
Send a message via AIM to Bullydawg
Re: 9 Bolt Machined Posi Cones... $60
TTT. Can't find the Shims... So $25 shipped!
__________________
88 Firebird Formula 350 89k miles

13.1 @ 105... 1.8 60ft W/ low compression in 2 cylinders and smaller cam...
Superram- Trickflow AL Heads- 268XFI *3290 LBS*
To Do List: Tranny (#3), Rearend (#3), Paint... Then DONE!!!
1990 5.0 Mustang DD 105k miles STOCK *3310 LBS*
Bullydawg is offline vBGarage Page   Reply With Quote
Old 01-21-2010, 06:30 AM   #38
Junior Member
 
Join Date: Feb 2006
Location: North carolina via LI New York
Posts: 49
Car: 85 T/A
Engine: 305 TPI
Transmission: 700R

Classifieds Rating: (2)
Re: 9 Bolt Machined Posi Cones... $45 shipped
PM Sent
MrBill85T/A is offline vBGarage Page   Reply With Quote
Old 01-21-2010, 06:30 AM
ThirdGen
1992 Camaro




Paid Advertisement


Reply

Go Back   Third Generation F-Body Message Boards > Classified Boards > Parts for Sale > Engine/Drivetrain/Suspension Parts for Sale
Reload this Page 9 Bolt Machined Posi Cones... $45 shipped
« 1986 iroc z 3.73 disc f/s f/t | 82 H.O. duel air cleaner »

Tags
bolt, cones, posi
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 09:27 AM.

Contact Us - ThirdGen.Org - Advertising - Privacy Policy - Terms of Use - Jobs - Top

Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.5.2
All content copyright © 1997 - 2012 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.

Emails & Contact Details