You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Fully built 700R4. Shift kit, vacuum lock out kit installed and an extra deep finned aluminum pan. Also, AN fittings installed. B & M Mega shifter for 3rd Gen council with the cable and brackets. Willing to negociate and trade. $850.00 obo negociable.
Last edited by chrispy383; 11-14-2009 at 03:31 PM.
Reason: sold
Fully built 700R4. Shift kit, vacuum kick down installed and an extra deep finned aluminum pan. Also, AN fittings installed. B & M Mega shifter for 3rd Gen council with the cable and brackets. Willing to negociate and trade.
It is a kit from painless wireing for the tranny to lock in overdrive with a vacume switch that converts to an electric signal that plugs in to the stock connector on the trans. this is so that you do not have to run the stock ECU for the trans to work properly.
It is a kit from painless wireing for the tranny to lock in overdrive with a vacume switch that converts to an electric signal that plugs in to the stock connector on the trans. this is so that you do not have to run the stock ECU for the trans to work properly.
I am looking to sll all of this as a packa.ge, but if you have a short throw shifter for a T5 let me know i would be interested in a trade for the mega consil shifter
According to Bongo international who ships through DHL the cost to ship the tranny to your door $123. To ship the mega shifter by usps I need to get $140.
I am looking for a short throw shifter for a T5, and a posi rear end. I have many other goodies to sell or trade, for example, tail lights 3 sets, 2 sets of T tops, and OER sail panels Grey, new.
Where was the tranny bough/who built it? I have hurst short throw and 4th gen posi with 3.23's. I live about 2 hours away and would be interested in picking up as well.
__________________ 1986 I-ROC Z-28
Fully Forged 388
Comp Xtreme Energy Cam
Weiand High rise Stealth
Built 700r4
3.08 rear end (stock) http://www.cardomain.com/id/IROC_U_1986
The tranny was out of a 91 rs. We have a local town sheriff that builds all the local racers trannys, name is Phill Brown from Birkshire, NY. We need to get together it sounds like we have what one another need.
