You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
So here are a few things that I either stock-piled or acquired recently that I decided I don't feel like doing anymore. I really just want to get back what I spent, so hopefully someone can use these. Everything fits a Chevy 350 and some are universal. I'm going to be fairly negotiable with prices, but would like to break even. Shipping is not included in price.
1. Distributor- used but fine, needs new cap $140
2. 4 barrel intake (don't see a brand name) $60
3. Holley 4 barrel carb $140 (probably needs rebuilt)
4. Mickey Thompson valve covers- $15 (one should be sanded/media-blasted on the top and one corner)
5. Stock valve covers (2 sets)- $5
6. Fuel Pressure gauge- $20 (little bit of tarnish on chrome cover, needs polished)
7. Amber foglights (pair)- $60
8. Chrome water neck- $10
9. Chrome Timing cover- $10
10. Louvered grille- $25
11. Gauge cluster for 90-92 (less than 100,000 miles)
No maintenance required unless otherwise noticed. Thanks for looking!
Last edited by rick121; 10-29-2009 at 03:38 PM.
Reason: Forgot to mention the paint chipping on valve cover
couldn't tell you if the timing cover would cover anything other than stock single cam for sure. I'll assume if you didn't buy a special one to cover it then yeah. piics tomorrow when i can get the camera working and mess.
Valve covers are flange bolts. Forgot to mention that one needs sanded a bit or media blasted as the old paint started chipping off and I didn't feel like sanding it myself.
I want the Y pipe; perhaps these details from the PayPal payment will help to resolve the payment issue:
Payment Sent (Unique Transaction ID #46Y93016RA359590F)
Sent to:
Christopher Rowan
Email: crowan81@hotmail.com
Amount sent:
-$70.00 USD
Fee amount:
$0.00 USD
Net amount:
-$70.00 USD
Subject:
You've got money!
Note:
Shipping address;
Andy L. Sherrer
7300 Walmsley Blvd
Richmond, VA 23235-5820
DO NOT SHIP TO THE KEY DEER DRIVE ADDRESS. The richmond address is my work and since it is a business it will be cheaper shipping. Thanks, Andy
Shipping Address:
3rd Gen Solutions
14000 Key Deer Drive
Midlothian, VA 23112-6108
United States
Confirmed
__________________ 82 Z28- 383 roller w/Vortec heads Edelbrock Performer Vortec intake, Edelbrock Q jet, serpentine belt drive.TH700R4 w/B&M holeshot 2000 converter,& megashifter.1LE front brakes, 9bolt 3.27 w/1LE rear brakes.Aluminum driveshaft,boxed rear susp. poly everything, IROC swaybar+wonderbar and steering box. Spohn subframe connectors. 70mph@2200rpm ASE Master Tech plus L2
also Latest project car,'86 IROC stock 305TPI hit on left side,but not too bad ( now repaired and equipped with the 1LE brake system). Also 1990 IROCZ 5.0 TPI 5 speed (drive train has 150 miles since new), and another 1990 IROCZ 5.7 G-92 etc., and yet another 1990 IROC-Z, red w/flames, and 1988 IROC-Z convertible, red w/59,000 miles.
you've got the wrong guy. First off, that is not my paypal address. Second, I've been trying to buy a y-pipe for months, but have never sold one. In fact, the only other listing I made for items was one a few weeks ago for the same valve covers mentioned above that never sold. According to that you're looking for a "Christopher Rowan" my name is Richard Boone. If you have problems with getting your item however, paypal does have a system of getting your money back. I've never had to use it, but I know they have one. Hope you get everything worked out!
Hopefully no one judges me based on ANDYZ28's post because I've never even heard of the dude. Here's a few people you can contact if you doubt me: My86'stitsRout, adriancamaro, kerplunk318, ryan91rs. I've bought stuff from these guys and they know my email and paypal info because i'vve bought from them before
__________________ 82 Z28- 383 roller w/Vortec heads Edelbrock Performer Vortec intake, Edelbrock Q jet, serpentine belt drive.TH700R4 w/B&M holeshot 2000 converter,& megashifter.1LE front brakes, 9bolt 3.27 w/1LE rear brakes.Aluminum driveshaft,boxed rear susp. poly everything, IROC swaybar+wonderbar and steering box. Spohn subframe connectors. 70mph@2200rpm ASE Master Tech plus L2
also Latest project car,'86 IROC stock 305TPI hit on left side,but not too bad ( now repaired and equipped with the 1LE brake system). Also 1990 IROCZ 5.0 TPI 5 speed (drive train has 150 miles since new), and another 1990 IROCZ 5.7 G-92 etc., and yet another 1990 IROC-Z, red w/flames, and 1988 IROC-Z convertible, red w/59,000 miles.
I'm actually not sure what year it is. It's sitting on top of a 71 Chevelle motor. I wouldn't be too terrible suprised to find that it is a stock 71 intake
