You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
im thinking about selling my 10 bolt, it has Richmond 3.42 gears with stock posi. 26 spline axles.it is out of a 1990 iroc camaro. it has all new bearings seals and races accept the differential carrier. it has a new GM crush sleave. it has a spacer and new ring gear bolts from summit. it also has drum rebuild kit on it (springs and wheel cylinders), the shoes are not worn that much and i had the drums machined before i put it all together (they are still in spec and could be machined again if needed also no hot spots).it does not leak anywhere and there are only about 500 miles on the gears it has 80,000 miles(?)on the rear it self.ii had it built and everything checked by a family friend who used to race and build cars professionally. i have over $450 into it and i was just wondering what i could get for it and if it was actually worth taking it out. if i do sell it i wont ship because its so big.
(old 3.08 gears)
(Richmond 3.42 ring and pinion) 
