got some goodies i'd like to get rid of to help fund the new motor. 91-92 style 16" wheels. i had the fronts on the rear, and the rears on the front with a 1/4" spacer with s 255/50/16 on the "rear" and 245/50/16 on the "front". grey inserts, no real curb rash. the clear is starting to crack in some spots. all four center caps included, and i'll throw in the spacers i use for the fronts. i did this so the wheels would fill the fender wells up better. it's hard to capture in a picture, but if you want to see them on my car to see how much better they look, you're more than welcome to. $325 OBO

-Harwood 3" cowl hood. this hood had hood pins in it. we tried to patch the holes, but the fix didn't really take. no cracking or anything in the fiberglass patch, but they kinda raised up giving it a "dimpled" look. while it's not what i was going for, it actually looks kinda neat, you be the judge. the hood has already been painted GM "Bright White" and has a very light set of ghost ss style stripes in blue pearl. this is a BOLT ON hood, and works with all the hood latch stuff. it's still on the car, you're more than welcome to come look at it. a hole has been cut in the cowl portion (by the glass) for a 2 5/8" fuel pressure gauge. $350 OBO.




-s10 manual steering box, no play, GREAT shape, already has f-body/g-body pitman arm on it. SOLD


-lq4 pistons and rods, $85 shipped

-317 heads, good for ls1 guys going to a FI setup because of the larger 71cc combustion chamber. has ls6 style runners, flow great for stock heads. $300 shipped PENDING

-4" magnaflow race muffler. this is a rectangular style muffler. it's just too big for my sumped fuel tank, so i'm going duals. $75 shipped


-Hoosier drag tires. 29x9 rear slicks, about 8 months old, only 15 passes. 28" tall front runners, about 2 years old, tread depth like new. $175 picked up for rears, $100 for fronts, $250 for all four.

-i have an 18' double axle trailer with a winch, and a chevy truck. i can transport anything you want for $1/mile, minimum $30 to cover gas in coming over. because this is so cheap, you will have to work with my schedule. i am NOT looking to be a recovery service. if you are stuck on the side of the road, consider calling a wrecker, but if you need a car taken to atlanta, or further away, or just across town, i'm your man.



i will consider some trades for some shop equipment as well. i'm looking for:
-20 ton hydraulic press, does not have to be pneumatic, actually prefere the manual ones.
-15" or larger drill press
-INDUSTRIAL style vice. one of the ones you find in your grandpa's shop...something that will never fail, no matter how much i beat on it.
-band saw

give me a call if any of this interests you:
478.396.7337
-Matt Walter

pm sent about steering box

back to the top, this stuff is all OBO, please don't hesitate to offer lower than i'm asking. i'm suprised these wheels aren't gone yet. they look so good, and i'm throwing in the necessary spacers for you to be able to duplicate the look i've come up with.