Turbo hotside!
#1
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Turbo hotside!
Well I have started another design so this needs to go!
I have a custom log setup.
1 5/8 logs (round SBC ports)
3/8 flanges
V-band 2.5inch outlets.
O2 bungs
2.5inch crossover made of 1/8 thick and 14 gauge steel with v-bands and stainless steel 6inch flex pipe, that merges the two banks into a 3inch 1/8thick pipe.
Also has a 2inch pipe welded to it for a 50mm wastegate 9cut the wastegate off)
Has a 3/8s thick T6 flange welded to the crossover.
Willing to sell for 400 PLUS SHIPPING
I will forsure post pics tonight, now that im all unpacked at my new house.
I will repaint everything before shipping.
I made 600RWHP with this combo on 8psi
Turbo AND Wastegate NOT INCLUDED WILL INCLUDE FOR AN ADDITIONAL 500. (or it will be used in current setup)
Jay
I have a custom log setup.
1 5/8 logs (round SBC ports)
3/8 flanges
V-band 2.5inch outlets.
O2 bungs
2.5inch crossover made of 1/8 thick and 14 gauge steel with v-bands and stainless steel 6inch flex pipe, that merges the two banks into a 3inch 1/8thick pipe.
Also has a 2inch pipe welded to it for a 50mm wastegate 9cut the wastegate off)
Has a 3/8s thick T6 flange welded to the crossover.
Willing to sell for 400 PLUS SHIPPING
I will forsure post pics tonight, now that im all unpacked at my new house.
I will repaint everything before shipping.
I made 600RWHP with this combo on 8psi
Turbo AND Wastegate NOT INCLUDED WILL INCLUDE FOR AN ADDITIONAL 500. (or it will be used in current setup)
Jay
Last edited by Jay_rich; 12-02-2009 at 09:05 AM.
#2
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Turbo hotside!
Here is a pic just in the process...Ill get complete pics tonight around 10pm they will be up forsure.
Sorry for the crappy pic its from my blackberry
Jay
Sorry for the crappy pic its from my blackberry
Jay
#3
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Turbo hotside!
There it is, sorry its all a bit dusty from being in the garage! just needs a fresh coat of paint.
Jay
Jay
#4
Member
Join Date: Nov 2007
Location: parma,OH
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro RS
Engine: 350, forged 355 in the works
Transmission: 4 speed goin to th400
Axle/Gears: stock 9bolt, 3.27
Re: Turbo hotside!
its parma ohio 44130. and will this work for the tbi serp set up. get me a price on the whole thing and just the hot side pipe only
#5
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Turbo hotside!
replied...will leave the wastegate on for an extra 100.
So 500 plus ship with the wastegate or 400 plus ship without.
For reference on shipping..
Box will be around 36 x 20 x 20 inches and 40-50lbs
Shipping from postal code n8w 4t6 (canada) I live 10min from detroit
Jay
So 500 plus ship with the wastegate or 400 plus ship without.
For reference on shipping..
Box will be around 36 x 20 x 20 inches and 40-50lbs
Shipping from postal code n8w 4t6 (canada) I live 10min from detroit
Jay
Trending Topics
#11
Member
Join Date: Feb 2006
Location: Los Angeles
Posts: 160
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1987 Chevy El Camino
Engine: 357 CID w/Lingerfelter Super Ram
Transmission: 700-R4
Axle/Gears: GN 8.5 342's
Re: Turbo hotside!
Would that set-up fit on an G-Body El Camino?
Any pictures of it set up on the car?
Thanks,
Dave
Any pictures of it set up on the car?
Thanks,
Dave
#13
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Turbo hotside!
I only have one shitty pic and it was before o redid the crossover....I could however bolt it on the car this week to get a better view?
Im in the process of my new one so it shouldnt be hard/time consuming
im running a garrett T6 74mm with a .96AR
Jay
Im in the process of my new one so it shouldnt be hard/time consuming
im running a garrett T6 74mm with a .96AR
Jay
#14
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Turbo hotside!
up WASTEGATE is SOLD! so it has been cut off the crossover, you can easily weld a new on on tho.
Jay
Jay
#15
Member
iTrader: (3)
Join Date: Feb 2003
Location: Bealeton, Virginia, 22712,USA
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 L98 Z28 Heritage Hard Top
Engine: L98 350 w/ HSR,24lbs inj,AFPR
Transmission: TCI Super Street Fighter W/3300 sta
Axle/Gears: 3.73 Detriot NoSpin,LPW cover
Re: Turbo hotside!
More info on the Turbo. Damn man wish I had found this a week ago. Might take both the turbo and crossover
#16
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: Turbo hotside!
well i decided im gonna keep the turbo only bc i cant afford to buy another atm, have some stuff to pay off like the new furnace i just put in the house, so Ill use this turbo again for this season.
Hotside only forsale now
Jay
Hotside only forsale now
Jay
Thread
Thread Starter
Forum
Replies
Last Post
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM