You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Sbc 355,dart iron eagle platinum heads, comp cams nx276 hyd roller camshaft, master power t76 .96 a/r turbo,CSU 750 cfm blow thru carburetor, TKO 600 , inland empire drive shaft,3.73s with tons of other mods!!!!!!!!!
one more question is this outta your 96 ss? and how many miles on it def interested...........
__________________
Sbc 355,dart iron eagle platinum heads, comp cams nx276 hyd roller camshaft, master power t76 .96 a/r turbo,CSU 750 cfm blow thru carburetor, TKO 600 , inland empire drive shaft,3.73s with tons of other mods!!!!!!!!!
I would really like to enlighten you guys as to what this is and what it came out of but I for the life of me cant seam to place where I got it. I just know its got the Auborn symbol on it and its stamped 3.42 on the ring gear. For all I know it came out of one of the numerous rear ends I have had in the past and the ring for it is long gone. I dont even know without counting how many spline it is, as that would tell me a little about what Gen it came out off. I,m willing to work with someone who is inrested as its not doing me any good lying around my place.
can you look into the side of the differential where the axle slides in and count the number of splines? i dont want to take a chance and buy something that i find out when i get it i cannot use it. thanks in advance
I am so sorry I didnt realize I put PINION in the title, there is no Pinion and I dont have a clue where it is, Heck I dont even know where this carrier came from.
I have to many parts lying around and I thought this was just a 2.73 stocker then I happend to look at the numbers on the ring and went HMMMM??
I,ll try to count the splines tonight, something tells me this isnt going to easy.
It has US patent 1987 Stamped on the side of the carrier. It must be out of a third Gen then. Most likely a 7.5 ?? Come on guy I dont need this and I,m sure someone could at least put the Carrier to use with YOUR ring and Pinion.
its most likely a 7.5" diff carrier.......87 could be a 26 spline axle but there could be a chance that its a 28 spline........not too sure on that one.....someone could chime in about that....... i had a real pushy customer that needed something quick so i wasnt trying to come off as a jerk to you......ive been on this board a long time and i know common courtesy and respect go a long way..........good luck with the sale
I'll take the auburn...Even if I have to buy axles for it.I had a NIB ripped off out of my house with about $20,000 worth of Summit and Jegs boxes full of goodies...Cops don't care and I learned to install the stuff so it's harder to steal.My number is (816)797-9094 John is my name.Maybe this time I can enjoy the rearend.I also still have the NIB 3.73's for it.So the gear won't be any problem.
I'll take the auburn...Even if I have to buy axles for it.I had a NIB ripped off out of my house with about $20,000 worth of Summit and Jegs boxes full of goodies...Cops don't care and I learned to install the stuff so it's harder to steal.My number is (816)797-9094 John is my name.Maybe this time I can enjoy the rearend.I also still have the NIB 3.73's for it.So the gear won't be any problem.
Where are you located?? Your story off being robbed is confusing could you re essplain yourself on that.
You paypal I,ll send it to you. PM me no phone calls.
1996 SS M6 #15 
