You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Hey guys, I'm selling parts that are no longer needed due to my IRS swap. All these parts are in perfect working condition and were pulled because they simply aren't needed anymore.
Here are the 28 spline axles. These were used in 89-92 cars, if you have an earlier car you'll need these to use any later model limited slip unit. The c-clip grooves are clean, the splines are not worn and these axles already have ARP studs in them. $75 OBO
Here is a Zexel Torsen limited slip unit from an LS1 4th gen. This was one of the last SLP take-out units. These are torque biasing units that never wear out and do not chatter or bang when engaged. This unit is in perfect condition and was only removed because I don't need it anymore. It has never been subjected to any gear, bearing or axle failure and worked great when removed.
__________________
86 IROC, Superram 383, TKO 600, C4 IRS
89 GTA, L98, A4. T56 swap pending
91 TA LB9/T5 (R.I.P)
