Parting out TTA #677
02-14-2013, 07:33 PM
#1
Member
Thread Starter
Join Date: Sep 2001
Location: Vancouver, B,C, Canada
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Parting out TTA #677
Hey guys,
Well ive finally come around to the decision that im not going to be building my tta clone, i just dont have the time or need to take on another project for myself right now. So im puttin everything up for sale either as a project if someone wants to take it all or going to part it out which im sure wont be a problem selling the parts. i bought the original tta a couple years back, actually found it on this site, and its car number 677. I disassembled the car when i first got it up here so its already part. i have a bill of sale and receipts for almost everything the previous owner had installed. I also have a 1991 GTA roller with a clean title that i bought for the swap. If your looking for certain parts or want to buy the whole project contact me by pm or email. The car is listed locally and on other sites so if you first here to ask about a part doesnt mean your first on the list for the part but i will be fare with everyone. Also feel free to to shoot me offer's on these parts but if you low ball me dont expect a response back, i dont have the time to waste dealing with people that want something for nothing. Also im not up on the current market value of each individual part here so bare with me as will have to do some homework to come up with prices that fair for both the buyer and seller.
That being said the car was 677 and was t boned on the passeger side. I accident was talked about on this site. Let me know what your looking for and ill let you know if its available and also send you some pics. Im on the fence about selling the long block as a might keep it as a spare for me GN. The interior is all in great shape with the exception of the pass door panel and pass rear seat/ trunk panel. The front pass side spindle was bent but if your interested in the brakes i have a new set of spindles. The car was very clean and ill list the mods it had that are available below.
Let me know what your looking for.
Dave
Ta88gta@shaw.ca
Engine
Rebuilt Buick 3.8 liter LC2 V6
John's Performance metal MAF pipe
John's Performance vacuum block
John's Performance adjustable push rods
John's Performance 206/206 camshaft
JE forged pistons
Federal Mogul piston rings
Federal Mogul crankshaft bearings
Federal Mogul connecting rod bearings
Federal Mogul camshaft bearings
John's Performance 70mm throttle body
John's Performance 100lb valve springs
Bored/honed/magnafluxed/resurfaced/balanced block,
ARP bolts,
TA-49 3-bolt turbo ,
43.5lb fuel injectors
Engine/trans:
Complete engine pan to TB, Includes all of the accessories, and t49 turbo $3500 (will sell complete or part out depending on what people want)
3" up pipe $50 will throw in the k/n filter
Maf Sensor $120
CAS front mounted intercooler SOLD
ATR 3" downpipe with John's Performance 5lb wastegate spring SOLD
3" Test pipe will go with the down pipe
Hooker 3" cat-back SOLD
rebuilt TH2004R, DD shift kit, Precision Industries 2800 rpm stall converter
Jeg's transmission cooler with fan SOLD
Cooling fans $65
A/c condenser and lines SOLD
Headers and crossover SOLD
Ecu $100
Engine Harness $500
Heads with John's Performance 100lb valve springs and stock rockers $500
Valve covers $80
John's Performance adjustable push rods, 206/206 camshaft, lifters $135
Stock Intake w/ Plenum, throttle body, fuel rails and 43.5lb injectors 425.00
Suspension/Exterior:
1LE front brakes, pass side spindle was damaged in accident but will include two brand new spindles. SOLD
Eibach Pro springs $140
Jegs torque arm $150
TTA hood pad $180
91-92 GTA tail lights $380
Mint glass t tops $175
Ams 500 boost controller it pretty much new i used in it my gn for a weekendSOLD
i also have the owners kit and car badges but i have to verify that its all there and the condition of it all, as i havent looked at this stuff in a while. Im kind of leaning towards keeping the short block as a spare for my GN everything else to do with the motor is up for grabs unless someone makes me a good offer on the complete motor.
If i havent listed what your looking for just ask, i dont have the shell anymore but i kept pretty much everything
Well ive finally come around to the decision that im not going to be building my tta clone, i just dont have the time or need to take on another project for myself right now. So im puttin everything up for sale either as a project if someone wants to take it all or going to part it out which im sure wont be a problem selling the parts. i bought the original tta a couple years back, actually found it on this site, and its car number 677. I disassembled the car when i first got it up here so its already part. i have a bill of sale and receipts for almost everything the previous owner had installed. I also have a 1991 GTA roller with a clean title that i bought for the swap. If your looking for certain parts or want to buy the whole project contact me by pm or email. The car is listed locally and on other sites so if you first here to ask about a part doesnt mean your first on the list for the part but i will be fare with everyone. Also feel free to to shoot me offer's on these parts but if you low ball me dont expect a response back, i dont have the time to waste dealing with people that want something for nothing. Also im not up on the current market value of each individual part here so bare with me as will have to do some homework to come up with prices that fair for both the buyer and seller.
That being said the car was 677 and was t boned on the passeger side. I accident was talked about on this site. Let me know what your looking for and ill let you know if its available and also send you some pics. Im on the fence about selling the long block as a might keep it as a spare for me GN. The interior is all in great shape with the exception of the pass door panel and pass rear seat/ trunk panel. The front pass side spindle was bent but if your interested in the brakes i have a new set of spindles. The car was very clean and ill list the mods it had that are available below.
Let me know what your looking for.
Dave
Ta88gta@shaw.ca
Engine
Rebuilt Buick 3.8 liter LC2 V6
John's Performance metal MAF pipe
John's Performance vacuum block
John's Performance adjustable push rods
John's Performance 206/206 camshaft
JE forged pistons
Federal Mogul piston rings
Federal Mogul crankshaft bearings
Federal Mogul connecting rod bearings
Federal Mogul camshaft bearings
John's Performance 70mm throttle body
John's Performance 100lb valve springs
Bored/honed/magnafluxed/resurfaced/balanced block,
ARP bolts,
TA-49 3-bolt turbo ,
43.5lb fuel injectors
Engine/trans:
Complete engine pan to TB, Includes all of the accessories, and t49 turbo $3500 (will sell complete or part out depending on what people want)
3" up pipe $50 will throw in the k/n filter
Maf Sensor $120
CAS front mounted intercooler SOLD
ATR 3" downpipe with John's Performance 5lb wastegate spring SOLD
3" Test pipe will go with the down pipe
Hooker 3" cat-back SOLD
rebuilt TH2004R, DD shift kit, Precision Industries 2800 rpm stall converter
Jeg's transmission cooler with fan SOLD
Cooling fans $65
A/c condenser and lines SOLD
Headers and crossover SOLD
Ecu $100
Engine Harness $500
Heads with John's Performance 100lb valve springs and stock rockers $500
Valve covers $80
John's Performance adjustable push rods, 206/206 camshaft, lifters $135
Stock Intake w/ Plenum, throttle body, fuel rails and 43.5lb injectors 425.00
Suspension/Exterior:
1LE front brakes, pass side spindle was damaged in accident but will include two brand new spindles. SOLD
Eibach Pro springs $140
Jegs torque arm $150
TTA hood pad $180
91-92 GTA tail lights $380
Mint glass t tops $175
Ams 500 boost controller it pretty much new i used in it my gn for a weekendSOLD
i also have the owners kit and car badges but i have to verify that its all there and the condition of it all, as i havent looked at this stuff in a while. Im kind of leaning towards keeping the short block as a spare for my GN everything else to do with the motor is up for grabs unless someone makes me a good offer on the complete motor.
If i havent listed what your looking for just ask, i dont have the shell anymore but i kept pretty much everything
Last edited by TA88GTA; 06-04-2013 at 12:02 PM.
02-15-2013, 11:30 PM
#3
Member
Thread Starter
Join Date: Sep 2001
Location: Vancouver, B,C, Canada
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
05-02-2013, 08:07 PM
#4
Member
Re: Parting out TTA #677
Do you still have the K-fra,e you were gonna use for the swap? if so how much?
Last edited by broke91firebird; 05-02-2013 at 08:53 PM.
Trending Topics
06-04-2013, 12:03 PM
#9
Member
Thread Starter
Join Date: Sep 2001
Location: Vancouver, B,C, Canada
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
07-27-2013, 12:03 PM
#19
Senior Member
iTrader: (10)
Join Date: Jan 2009
Location: Edmonton, Alberta.
Posts: 718
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: Parting out TTA #677
Any chance you have a driver side front control arm?
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM
