You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
hi, i bought a 85 tpi setup, that came with a partially cut harness... and i dont want to mess with it, the ecm i need the harness to match is 01227165. i am worried cause i think this ecm is for 86-88... not sure.. just need all the wiring to get it running. its a swap to a car that didnt have a tpi.. so i think i need the fuse block and relays and all i think... needs to have the plug for the small cap dist, will pay extra if you have the dist and coil, and will pay extra for a matching maf also.
What year is your car. I have a complete 85 wiring harness and it will work with your computer it is uncut out of an 85 camaro uses the HEI dist. If your car is an 85 It will plug into your under dash connector and run like a top. other wise you will have to splice into the right wires on the under dash end. 325-280-9989 if you have any questions
P.S. I also have the maf and tubing for the camaro. I am needing the speed density tube for a camaro.
Last edited by rednblackrs; 03-18-2007 at 09:10 PM.
I have an uncut 1985 TPI harness with CPU and two chips...one from TPI.com and the other a Superchip. $100 plus shipping. I'll throw in the correct throttle cable if you need it.
hi, i bought a 85 tpi setup, that came with a partially cut harness... and i dont want to mess with it, the ecm i need the harness to match is 01227165. i am worried cause i think this ecm is for 86-88... not sure.. just need all the wiring to get it running. its a swap to a car that didnt have a tpi.. so i think i need the fuse block and relays and all i think... needs to have the plug for the small cap dist, will pay extra if you have the dist and coil, and will pay extra for a matching maf also.
you need to get a Camaro harness from 86 or 87 otherwise you will have to modify the wiring. If you are gonna use 85 harness then you need to change the ecm to 870. if you use 88 89, then you have to modify the wires because in those years 88-89 GM combine two harness in one engine management and engine accessories. Here is a harness I have for sale on ebay http://cgi.ebay.com/ebaymotors/ws/eB...0292205&rd=1,1
