Somebody to modify my LT1 intake - Third Generation F-Body Message Boards

bigred2004 · 12-15-2008, 12:26 AM

Anybody on here can modify my LT1 intake for the distributor, bolt pattern, and water outlets? I had one guy a while back who wanted to do it all for $200 which was very reasonable.... I just lost his contact info! I have a bare intake that I need converted so I can run it on my 434, its alot better budget intake than the miniram! If somebodys up for the job and wants to do it e-mail me please, bigred2005@suddenlink.net

aholzhaus · 12-17-2008, 08:09 PM

I can mod your intake for the same price plus I can remove the EGR casting and do a air gap and bore your butterfly holes to 60mm and I can mod your fuel rails for AN 6 fittings.

http://s280.photobucket.com/albums/kk197/aholzhaus/

bigred2004 · 12-17-2008, 08:25 PM

Hey man that looks like some good work. Im not a big fan of the whole air gap but send me your e-mail address and we can discuss the work. You do some good work.

Toyota h8r · 12-18-2008, 02:34 AM

im looking also to have a lt1 intake converted but i just want the bare bones done like intake bolt hole relocation and distributer hole machined. Along with the rear crossover tubes machined and taped.

the conversion of the fuel rail would be nice so i wouldnt have to make custom lines