You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
my 305 bit the dust last year so i'm looking to upgrade. i need a 350 that works with TPI. i live in New Jersey so a seller in the same state would be prefered as i would be picking it up. if not hopefully we can make a deal on shipping.
thank you.
__________________ 1988 Trans Am GTA
Flame Red Metallic, blown up 5.0L/305 Cid (LB9), 350 on the way,T-tops, 700-R4 trans (MD8) soon to be WC T-5, WS6, 4 wheel disc (soon to be 1LE set up), 16" GTA gold diamond spoke wheels, BFG KDWS, digital dash, borg-warner 9-bolt 3.27 limited slip differential, 52mm Holley throttle body, PREMIUM GAS ONLY (93 octane), dynomax exhaust, K&N air filter, AC delco stock plugs and wires, AC delco stock oil filter. 36mm front sway bar (stock), 24mm rear sway bar (stock), ES polyurethane front sway bar endlinks, spohn greaseable polyurethane front sway bar bushings, KYB GR-2 struts, KYB gas-a-just rear shocks, more mods to come.
I have a 69 camaro 350 010 short block for sale. 400 bucks Pm me for more info. Short block as in you need heads/top end, reuse your 305 stuff=higher compression good power, or get a set of cheap 350 heads and reuse your intake and stuff either way both good options.
Transmission:
Rockland gear T56, Ram aluminium flywheel, SPEC Stage 2+ clutch, GM slave and master. Rear End:
3:73's, other then that stock until she blows.
Other Mods:
Energy Suspension bushings, Hotchkis SFC, Hotchkis rear LCAs, Front vented rotors, New Ball Joints, New Tie-Rods, New Center Link, New Idler Arm, All Brakes are new, Struts/Shocks. Big Block Fiberglass Hood. Griffen 19X31 Radiator W/ custom shoud. Spohn Trans Crossmember with Adjustable Torque Arm, Spohn Driveshaft. 4th Gen leather Seats. M/T ET street tires....
" 78 monte
I put 305 heads on a 350 with dished pistons.With a mild cam ,4bbl and headers.The motor ran like a raped ape.Comp was probably around 9.5:1 w/ dished pistons."
Quick google search and a few threads say YAY and some say nay.
58 cc combustion chambers make for more power. clean them up(porting) maybe bigger valves and ur golden or like I said 350 heads(you can get a set of basic heads in good condition for 50-100 bucks!)
I have a 1988 L98 longblock from a GTA, was a running engine that has been sitting in storage a couple years so consider it a good core to build, lower end is good ran with no knocks or noises. $150 pick up in NY zip 12538 not far from NJ.
__________________ 1988 Trans Am GTA
Flame Red Metallic, blown up 5.0L/305 Cid (LB9), 350 on the way,T-tops, 700-R4 trans (MD8) soon to be WC T-5, WS6, 4 wheel disc (soon to be 1LE set up), 16" GTA gold diamond spoke wheels, BFG KDWS, digital dash, borg-warner 9-bolt 3.27 limited slip differential, 52mm Holley throttle body, PREMIUM GAS ONLY (93 octane), dynomax exhaust, K&N air filter, AC delco stock plugs and wires, AC delco stock oil filter. 36mm front sway bar (stock), 24mm rear sway bar (stock), ES polyurethane front sway bar endlinks, spohn greaseable polyurethane front sway bar bushings, KYB GR-2 struts, KYB gas-a-just rear shocks, more mods to come.
__________________ 1988 Trans Am GTA
Flame Red Metallic, blown up 5.0L/305 Cid (LB9), 350 on the way,T-tops, 700-R4 trans (MD8) soon to be WC T-5, WS6, 4 wheel disc (soon to be 1LE set up), 16" GTA gold diamond spoke wheels, BFG KDWS, digital dash, borg-warner 9-bolt 3.27 limited slip differential, 52mm Holley throttle body, PREMIUM GAS ONLY (93 octane), dynomax exhaust, K&N air filter, AC delco stock plugs and wires, AC delco stock oil filter. 36mm front sway bar (stock), 24mm rear sway bar (stock), ES polyurethane front sway bar endlinks, spohn greaseable polyurethane front sway bar bushings, KYB GR-2 struts, KYB gas-a-just rear shocks, more mods to come.
__________________ 1988 Trans Am GTA
Flame Red Metallic, blown up 5.0L/305 Cid (LB9), 350 on the way,T-tops, 700-R4 trans (MD8) soon to be WC T-5, WS6, 4 wheel disc (soon to be 1LE set up), 16" GTA gold diamond spoke wheels, BFG KDWS, digital dash, borg-warner 9-bolt 3.27 limited slip differential, 52mm Holley throttle body, PREMIUM GAS ONLY (93 octane), dynomax exhaust, K&N air filter, AC delco stock plugs and wires, AC delco stock oil filter. 36mm front sway bar (stock), 24mm rear sway bar (stock), ES polyurethane front sway bar endlinks, spohn greaseable polyurethane front sway bar bushings, KYB GR-2 struts, KYB gas-a-just rear shocks, more mods to come.
still looking for an 350 engine for my 88 GTA or a Gen 1 vortec 350 from a chevy van from around 1993!!! please help i need to get this done by august!
__________________ 1988 Trans Am GTA
Flame Red Metallic, blown up 5.0L/305 Cid (LB9), 350 on the way,T-tops, 700-R4 trans (MD8) soon to be WC T-5, WS6, 4 wheel disc (soon to be 1LE set up), 16" GTA gold diamond spoke wheels, BFG KDWS, digital dash, borg-warner 9-bolt 3.27 limited slip differential, 52mm Holley throttle body, PREMIUM GAS ONLY (93 octane), dynomax exhaust, K&N air filter, AC delco stock plugs and wires, AC delco stock oil filter. 36mm front sway bar (stock), 24mm rear sway bar (stock), ES polyurethane front sway bar endlinks, spohn greaseable polyurethane front sway bar bushings, KYB GR-2 struts, KYB gas-a-just rear shocks, more mods to come.
Last edited by GTAman; 07-09-2009 at 05:05 PM.
Reason: added option
I have a 91 C4 L98 shortblock I will sell for 150.00. I also have another 91 C4 L98 shortblock that is fresh that I want $800.00. Unfortunatly I am in Michigan.
I have a 91 C4 L98 shortblock I will sell for 150.00. I also have another 91 C4 L98 shortblock that is fresh that I want $800.00. Unfortunatly I am in Michigan.
Yes that's unfortunate for me. Anyone else have one? Preferably in nj.
