You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have good a pair of 28 spline axles with bearings, matching races, seals and retainer plate for a 9 bolt Borg Warner Australian rear. $10.00 for the pair plus shipping.
__________________ Balanced and Blueprinted Forged 4 bolt 383 stroker. Keith Black CNC aluminum forged flat top pistons 10:7, 4340 steel crank and 6.0" H Beam Rods, ARP fasteners, Canfield 23550 aluminum 65CC heads 2.08/1.60, Comp Cams hydraulic roller cam 5.20/5.40 lift .288/.292 duration, 1.6 aluminum roller rockers. Comp Cams "R" hydraulic roller lifters, AFR Hydra Rev Kit, port matched Edelbrock Aluminum Victor Jr Bowtie II intake, Barry Grant 825 CFM Mighty Demon with QFT 6.5 power valve and 1:1 link, Hooker 1 7/8" long tube headers. Crane digital distributor and ignition. SFI flywheel, Stage 3 racing clutch and 1LE aluminum drive shaft, BW Tremec T5 NWC with Pro 5.0 shifter. Moser ford 9" with 35 spilne Moser alloy axles, F35 Strange spool and 4.71 gears. Umi performance sub frame connectors, J&M LCA and pan hard bar with poly bushings.
