You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Would like to purchase a carbed 350 engine to swap into my 1992 Camaro RS. I'd like something from 1975 or newer, must run good and have relatively low miles, nothing over 150k. I am near Janesville, Wisconsin, postal code 53536. I am willing to travel, but less than 200 miles. Let me know what you have!
if your serious and not your usual self. cash in hand. I have allot of SBc parts. Cranks rods pistons heads I should have a block around too. some new some with very little miles. And cheap, I’m all 400 stuff now. more then enough for a rotating assembly, minus the cam. You know where to find me , but only if you have cash in hand. I know how you like to talk.
if your serious and not your usual self. cash in hand. I have allot of SBc parts. Cranks rods pistons heads I should have a block around too. some new some with very little miles. And cheap, I’m all 400 stuff now. more then enough for a rotating assembly, minus the cam. You know where to find me , but only if you have cash in hand. I know how you like to talk.
You let me know what it would cost for a running motor, and I will come with cash in hand. This is happening.
ok, I’ll put some #'s together tonight and we'll go from there, but please note I am not building it, I have no where near enough experience to be building motors just to sell. sorry.
