Engine SwapEverything about swapping an engine into your Third Gen.....be it V6, V8, LTX/LSX, crate engine, etc. Pictures, questions, answers, and work logs.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i know alot of other people are running the setup as me, a 350 with a 700R4 tranny, my swap is done and i've gotta get this TV cable out of the way. i've done my homework and know i need something like these.
thanks, and do you know if the throttle part is in the right spot for the cable, and i used the tv cable from the v6 tranny on my 700R4. that bracket should work for both cable from the v6 right? i really need to order my geometry corrector so i can be sure it will work.
I used a tbi or v6 throttle cable. The motor wasnt in the car, but I had TPI and needed a shorter cable. You can try the v6 throttle cable, if it doesnt work, you can pick up a tbi version for cheap.
