Engine SwapEverything about swapping an engine into your Third Gen.....be it V6, V8, LTX/LSX, crate engine, etc. Pictures, questions, answers, and work logs.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Hi everyone this is my very first thread on here ive been doing a lot of reading on these forums and the have all been very useful. I just bought a 1986 Camaro Berlinetta v6 5 speed with no engine or trans for $400.00. The body is pretty much perfect. no dents at all and no rust at all all pans are good. there is a little rust under the trunk but its not bad. the interior with a good cleaning would be a 9/10 with the exception of the cracked dash. Ive pulled all of the ecm out and all the wires from the passenger side and i have removed the ac box because i want to put a delete box on for just heat. I have a roller 350 an a th350 transmission (long shaft) in a 1984 gmc that I want to put in. but I want to have my engine compartment completely perfect with anything that I dont need gone and every wire where it needs to be to hook right up. I have all the wires coming from the drivers side fire wall but i dont know where any of them go I have a pic here and I would like for someone to tell me which color wire goes where.
