Engine SwapEverything about swapping an engine into your Third Gen.....be it V6, V8, LTX/LSX, crate engine, etc. Pictures, questions, answers, and work logs.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I'm getting some progress towards my motor build, so its almost time to start putting stuff back in the motor. So, i need to round up the motor mounts that i need. I've got a 2 piece seal motor 4 bolt main, so its most likely a 80's motor
I'm gonna move the V6 motor mounts up on the K Member, so will these mounts work?
Will those bolt up to my motor and my K-member?
Thanks in advance.
Scott
__________________ 1984 Sports Coupe 2.8 car; Interior stripped down with the seats remaining
Soon to be transplanted:
355sb, Speed Pro flat top, 4 valve relief hyperuectic pistons, Vortec heads waiting on mods.
Soon on the list; Holley 750, single plane intake, Mutha Thumpr' cam, th350 and 3.73's
Last edited by MrPhotographer0; 02-24-2010 at 02:47 PM.
no i wrote that wrong... will these motor side mount the chassis side mounts?
__________________ 1984 Sports Coupe 2.8 car; Interior stripped down with the seats remaining
Soon to be transplanted:
355sb, Speed Pro flat top, 4 valve relief hyperuectic pistons, Vortec heads waiting on mods.
Soon on the list; Holley 750, single plane intake, Mutha Thumpr' cam, th350 and 3.73's
__________________ 1984 Sports Coupe 2.8 car; Interior stripped down with the seats remaining
Soon to be transplanted:
355sb, Speed Pro flat top, 4 valve relief hyperuectic pistons, Vortec heads waiting on mods.
Soon on the list; Holley 750, single plane intake, Mutha Thumpr' cam, th350 and 3.73's
