so.. who makes the best crate engines?
11-28-2010, 06:50 PM
#1
Member
Thread Starter
Join Date: May 2010
Location: Toronto, Ontario
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Z28 Camaro
Engine: 30Slow
Transmission: 700R4
so.. who makes the best crate engines?
i wanna know which company makes the best bang for your buck crate engine wish! got suggestions? lemme know of some sites/ your favorite places to shop for parts/engines/whatever!
happy racing!
happy racing!
12-02-2010, 03:46 AM
#2
Senior Member
iTrader: (15)
Join Date: Jan 2009
Location: Ogden UT
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 Camaro (Gone...)
Re: so.. who makes the best crate engines?
Personally, I'm not the biggest fan of crate engines. I'd recommend going to a local, reputable machine shop, there's no good reason not to.
I've had one experience with crate engines... D&J Machine, AKA "Tuff Dawg Engines" on ebay and online. The motor sure looked pretty, price seemed reasonable, especially compared to other similar crate engines. But it blew a head gasket after only a couple hours of runtime... Hmmm. I wasn't pleased, to say the least. Maybe I just had really bad luck
I've had one experience with crate engines... D&J Machine, AKA "Tuff Dawg Engines" on ebay and online. The motor sure looked pretty, price seemed reasonable, especially compared to other similar crate engines. But it blew a head gasket after only a couple hours of runtime... Hmmm. I wasn't pleased, to say the least. Maybe I just had really bad luck
12-02-2010, 05:24 PM
#5
Junior Member
Join Date: Sep 2010
Location: Maili HI
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 RS,1991 Z28
Engine: TargetMaster 350, L98 350
Transmission: 700R4
Axle/Gears: 10 bolt posi 2.73s, and 3.23s
Re: so.. who makes the best crate engines?
here you guys go, now this is perfect for your street car LOL jk but these engines are bad to the bone...
http://www.sonnysracingengines.com/engines
http://www.sonnysracingengines.com/engines
Trending Topics
12-02-2010, 07:15 PM
#8
Member
Thread Starter
Join Date: May 2010
Location: Toronto, Ontario
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Z28 Camaro
Engine: 30Slow
Transmission: 700R4
Re: so.. who makes the best crate engines?
spade whatd u get and how much it cost you from atk? 
spade likin that ATK!
350 with nice with 510hp 500 torque lookin nice
hahaha!
thanks for the heads up primetime and james you cant go wrong with GM!
spade likin that ATK!
350 with nice with 510hp 500 torque lookin nice
hahaha!thanks for the heads up primetime and james you cant go wrong with GM!
Last edited by BrandonSB; 12-02-2010 at 07:25 PM. Reason: new update
12-03-2010, 01:35 AM
#9
Senior Member
iTrader: (15)
Join Date: Jan 2009
Location: Ogden UT
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 Camaro (Gone...)
Re: so.. who makes the best crate engines?
Just so ya know... That 510 horsepower 350 you see from ATK is with nitrous. Refilling nitrous bottles gets very expensive after a while
If you really want that much power (Personally, I don't think you need that much, I'd bet $$ you'd be happy with 400, especially for a street car), I'd look into bigger inch small blocks, like a 383 or a 400 block
--And Don't forget to budget for the rest of the drivetrain, to handle power levels like that. T5's are notoriously easy to break stock, and 700R4's won't like 500 HP either. Your 10 bolt rear end will hate life too. $$$$
If you really want that much power (Personally, I don't think you need that much, I'd bet $$ you'd be happy with 400, especially for a street car), I'd look into bigger inch small blocks, like a 383 or a 400 block
--And Don't forget to budget for the rest of the drivetrain, to handle power levels like that. T5's are notoriously easy to break stock, and 700R4's won't like 500 HP either. Your 10 bolt rear end will hate life too. $$$$
Last edited by Primetime91; 12-03-2010 at 02:06 AM.
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
09-17-2020 08:26 AM
theshackle
Tech / General Engine
4
03-05-2017 06:37 PM
