ExhaustPost your questions and suggestions about stock or aftermarket exhaust setups. Third Gen exhaust sound files and videos!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
The time has come to upgrade my motor, the heads I have are protopline 180cc angle plug heads, is anyone out there running hooker 2055s with these heads or any angle plug heads??? And if they won't fit what headers will? Just curious if I'm gonna run into fitment problem. Thanks
__________________ Black 1996 Z28, hardtop, M6, LT1, CHS heads, LE cam, Strange S60 w/4.30s, LPP longtubes, true duals.
11.88 @ 118---2009 LTXshootout Extreme Street NA winner
Red 1991 Z28, L98/auto, currently working on a LT1/4L60e swap.
Cool, thanks. I'm sure mine will fit fine, unless there is a difference between a factory casting and an aftermarket casting. Probably not though. Anyone out there running these headers with aftermarket angle plug heads, can you verify this to set my mind at ease?
__________________ Black 1996 Z28, hardtop, M6, LT1, CHS heads, LE cam, Strange S60 w/4.30s, LPP longtubes, true duals.
11.88 @ 118---2009 LTXshootout Extreme Street NA winner
Red 1991 Z28, L98/auto, currently working on a LT1/4L60e swap.
Im running a set of dart angle plug heads and the 2055's. The only problem i had was the 3rd plug back on the passenger side the one right in front of the dipstick. Its hard to work with not much room. If the dip stick wasnt there i wouldnt have had any problems. Also i dont know what type of spark plug wires your are running but i found that all 90* deg boots work great and are easy to keep away from the headers.
__________________ 84 Trans am crate 350w/cam/headers,intake,carb,dist,and exhaust,T5,D/F centerforce,4.11's,auburn locker,moser axles.
91 S10 406,TH350,9"
97 corvette Bolt ons lowered on C6 wheels
Cool, Thanks btw, I was running all 90 degree boots with the 2055s on the stock longblock, so i figured i would have to with the new motor too. Thanks again for putting my mind at ease
__________________ Black 1996 Z28, hardtop, M6, LT1, CHS heads, LE cam, Strange S60 w/4.30s, LPP longtubes, true duals.
11.88 @ 118---2009 LTXshootout Extreme Street NA winner
Red 1991 Z28, L98/auto, currently working on a LT1/4L60e swap.
Just curious if I'm gonna run into fitment problem. Thanks 
btw, I was running all 90 degree boots with the 2055s on the stock longblock, so i figured i would have to with the new motor too. Thanks again for putting my mind at ease 
