post your 3rd gen exhaust clip here - Page 2 - Third Generation F-Body Message Boards

DanTheMan_smlk · 07-08-2005, 11:51 PM

BUMP

come ppl....MORE CLIPS PLZ

STICKY

This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!

RWB____s · 07-16-2005, 11:39 PM

DanTheMan_smlk · 07-17-2005, 12:05 AM

http://www.putfile.com/

its free and doesnt have to be a video clip

RWB____s · 07-17-2005, 12:50 AM

BDK · 07-17-2005, 06:12 PM

Heres my newly purchased 88 Formy 350TPI with 43K original miles on the engine, not sure on the brand of headers... but has a catco hi-flow converter + flowmaster exhaust.

Note * The odometer is off Hehehehe

DanTheMan_smlk · 07-21-2005, 04:22 PM

*out of date info*

RWB____s · 07-22-2005, 12:38 AM

1tinindian · 07-24-2005, 10:19 PM

Here's a link of mine.

Give it a few minutes to load, I hope you like it.

It was done eariler this spring, with my 15 year old son behind the wheel.

http://www.ourmedia.org/node/9183

Leon.

DanTheMan_smlk · 07-25-2005, 12:44 AM

hey thats awesome! are you teaching your son how to drive with the trans am?

1tinindian · 07-25-2005, 05:42 PM

Quote:

Originally posted by DanTheMan_smlk
hey thats awesome! are you teaching your son how to drive with the trans am?

OH yes, I think he likes it as much as I do.

He's already got a few hundred miles of seat time in it so far, and is looking for more

Hope the wait wasn't to unbearable, for the clip, I'm kinda' new at the video posting

Thanks,
Leon.

mw66nova · 07-26-2005, 12:48 AM

here is a video of me doing a burnout:

http://www.nvlsonline.org/3rdgen/MOV09991.MPG

DanTheMan_smlk · 07-26-2005, 12:58 AM

thats not exactly what were looking for here....

no more burn out vids, thanks

mw66nova · 07-26-2005, 01:05 AM

oh, sorry, the motor screaming at 6500rpms doesn't count as an exhaust clip eh? what's the difference between that and a dyno run?

Rabbitt · 07-26-2005, 02:07 AM

320hp 355. hooker 2460s, CRAPPY y-pipe, hooker aerochamber catback. I really like how it sounds.

Here is a short one right when i started it up (it idles high right off the bat)
Here is one a minute later with a rev or two (still cold, as u can tell)

1FastZ · 07-26-2005, 08:34 AM

links don't work Rabbit

Rabbitt · 07-26-2005, 02:44 PM

anyone wanna host? putfile wont do just audio

ssean92 · 07-27-2005, 07:56 PM

here is mine after i finally got her running again

http://www.putfile.com/media.php?n=Picture72

sorry i have headmen shorties/headmen ypipe, cut to 3 inch out. 3 1/2 to muffler with 3 inch tips

speedingpenguin · 07-27-2005, 11:59 PM

Hedman Long tubes to an "off road" y-pipe (custom), 3" hooker Aerochamber cat-back with magnaflow tips

http://www.putfile.com/media.php?n=f...ustangpics-039

DanTheMan_smlk · 07-28-2005, 12:58 AM

aw man, i cant wait untill my car is done, its gonna sound soo awesome

WhiteHawk · 07-29-2005, 02:09 PM

Heres my clip:

Burn out, WOT drag launch (auto shift

), then cruise

also notice the wheel spin when I try to take off after the burn out, TORQUE MONSTER!

WAV file

jbenge · 08-02-2005, 01:43 PM

I finally got a little exhaust clip...its not that great but it gives you an idea. It has more bass in person. Click the link for MOV02333, sorry couldn't get to link directly for some reason.

http://f2.pg.briefcase.yahoo.com/bc/...Camaro&.view=l

DanTheMan_smlk · 08-02-2005, 04:09 PM

The page cannot be displayed
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.

awwww i really wanted to hear it...did u mess up the link?

urbanhunter44 · 08-02-2005, 04:19 PM

There's been a few people asking for bullet sound clips, so here's mine.

350 LT1
Stock manifolds
No cat
custom piped 3" with dual exit
Dynomax 12" bullet in I-Pipe

click Hear Me in the sig.

ssean92 · 08-02-2005, 06:29 PM

here is the new clip this one sounds better
http://www.putfile.com/media.php?n=92-lt1

DanTheMan_smlk · 08-03-2005, 04:41 AM

i used to hate that maroon paint until i saw yours....nice car man. I like the interior too. How many miles are on the body of the car?

ssean92 · 08-03-2005, 04:18 PM

there i bought the car with 62k 2 years ago, know it has 85k, thanks for the nice coments. i love my car, and its nice when people appriciate it also.

Orr89RocZ · 08-05-2005, 12:51 AM

heres a flyby vid of my exhaust

hooker shorties/y pipe
stock cat

3inch all way back to Flowmaster 80 series

10mph starting first gear flyby

http://videos.streetfire.net/Player....4-15BDDAD79771

IROCThe5.7L · 08-05-2005, 12:52 AM

Quote:

Originally posted by Orr89RocZ
heres a flyby vid of my exhaust

hooker shorties/y pipe
stock cat

3inch all way back to Flowmaster 80 series

10mph starting first gear flyby

http://videos.streetfire.net/Player....4-15BDDAD79771

Sounds gooooooooooooooooooooood!

Orr89RocZ · 08-05-2005, 12:59 AM

lol thanks. you have a 80 series to dont you? yours sounds abit deeper than mine

IROCThe5.7L · 08-05-2005, 01:49 AM

Quote:

Originally posted by Orr89RocZ
lol thanks. you have a 80 series to dont you? yours sounds abit deeper than mine

Is your 80 series the one that came with the catback? If so, I have a slightly different model. The sound clip in my sig "Listen to the exhaust" is with stock manifolds/Ypipe, and a Hi flow cat. The one that says "WOT" is with the headers/Ypipe/No cat. But everything I record with does not pick up the exhaust very well. It sounds a lot different in person.

What did you use to record? It sounds very clear.

DanTheMan_smlk · 08-05-2005, 03:30 AM

hey! since u finally found this post, make it a sticky!! It would prevent people from making posts that say "how would this sound" or "what is the best sounding..."

PLZZZZ theres so many clips here, u can let this thread fade away

im begging

Orr89RocZ · 08-05-2005, 03:35 AM

i used my digital camcorder. copied the file to laptop using dell movie studio. then burnt to cd in DVD format. then uploaded that file to my PC and used VirtualDub to convert it and mild compress it into AVI format to upload on streetfire.net. LOL

and yes my 80 series comes in the american thunder catback but its true 3inches all the way back

IROCThe5.7L · 08-05-2005, 04:45 AM

Quote:

Originally posted by Orr89RocZ
i used my digital camcorder. copied the file to laptop using dell movie studio. then burnt to cd in DVD format. then uploaded that file to my PC and used VirtualDub to convert it and mild compress it into AVI format to upload on streetfire.net. LOL

and yes my 80 series comes in the american thunder catback but its true 3inches all the way back

Thats a lot of work

My 80 series in a 3" in, 2.5 Out.

Orr89RocZ · 08-05-2005, 03:24 PM

it really only took like 3 minutes to do the whole thing LOL

oifish · 08-10-2005, 11:00 PM

Here is my 89 RS, with an open element, and a high flo-cat. Thats is it but it sounds pretty cool. It's my bro standing on the sidewalk and I'm pushn' it.

http://www.putfile.com/media.php?n=30589

DanTheMan_smlk · 08-11-2005, 12:30 AM

dude, thats awesome, it sounds like a race car

what part of indiana do you live in?

oifish · 08-11-2005, 10:50 AM

I've live in Noblesvile, which is about 15 miles north of Indianapolis. I was suprised too when I listened to it I didn't think a car with so little mods could sound so cool.

87TPI350KID · 08-11-2005, 12:24 PM

Finally got an exhaust clip, not very great but you get the idea.

Stock headers w/air still on. Stock y pipe. Stock cat. Magnaflow Catback.

http://www.putfile.com/media.php?n=PCDV0087

Zepher · 08-15-2005, 03:02 PM

http://www.transamws6.com/video/ZepherWS6.mpg

DanTheMan_smlk · 08-15-2005, 04:52 PM

mmmmmm that big cam.... bonerworthy

Am i allowed to say that?

1tinindian · 08-15-2005, 06:21 PM

Quote:

Originally posted by Zepher
http://www.transamws6.com/video/ZepherWS6.mpg

Zepher, what was the engine combo, in this video?

That's the sound that men of all ages, from child to retired, simply LOVE!!

Nice

Leon.

Zepher · 08-15-2005, 06:37 PM

Quote:

Originally posted by 1tinindian
Zepher, what was the engine combo, in this video?

That's the sound that men of all ages, from child to retired, simply LOVE!!

Nice

Leon.

305LG4 with 87+ TPI heads 87TPI converted to Speed Density, Crane Cams 2050 Camshaft, SLP Dual CAI, MSD 6A, Heddman Shorty headers, custom y-pipe, 3" Cat, 3" Pacesetter Stainless Steel Cat Back,
and that is about all,

This is what it looked like before the TPI ,

then afterwards,

1tinindian · 08-15-2005, 07:34 PM

All that great sound, coming out of a 305?!?!?

WOW!! Impressive!!

Know what ever happened with the car after you sold it?

Thanks,

Leon.

EvilCartman · 08-16-2005, 12:49 AM

Yay! it's a sticky now

DanTheMan_smlk · 08-16-2005, 01:25 AM

omg....my life's work is complete

i love u man...oh wait, ur not a moderator. I love whoever did it

lets keep the sound/vid clips of your exhaust comming!

Zepher · 08-16-2005, 03:01 PM

Quote:

Originally posted by 1tinindian
All that great sound, coming out of a 305?!?!?

WOW!! Impressive!!

Know what ever happened with the car after you sold it?

Thanks,

Leon.

If you are referring to my car, the 305 died, I sold the TPI and exhaust setup, installed an LT1/T56 and 4th gen dash, then sold it to a friend and he put all the suspension and drivetrain parts into his Camaro, then ran over the car with a big truck.

DanTheMan_smlk · 08-16-2005, 03:45 PM

omg...did u smack him around after that?

Zepher · 08-16-2005, 04:14 PM

Quote:

Originally posted by DanTheMan_smlk
omg...did u smack him around after that?

no, cuz he gave me $5,000 for the car. BUT I would have liked to have gotten the dash and GFX back since he wasn't using them

Zepher · 08-16-2005, 04:21 PM

Here is a video of the Formula 305TPI 5 speed running around the Auto-X.
http://www.transamws6.com/video/manny-acu4.wmv

This is just a flowmaster 80series with 3.5" tips, stock manifolds, stock 2.5" I-pipe.

1tinindian · 08-16-2005, 10:54 PM

Heres another we just made the other night (sorry neighbors

)
http://media.putfile.com/83TA2

Heddman shorty headers/ y-pipe, cat delete, DynoMax cat-back

Leon.