ExhaustPost your questions and suggestions about stock or aftermarket exhaust setups. Third Gen exhaust sound files and videos!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Here is a diagram of my choices,
The true duals on the left, Which I would need Long Tube Headers, and two mufflers, along with the header back kit. I was thinking about some tubular glass packs to assist in the clearance issues. I also wanted to use summits H pipe kit.
the header back kit $140 $40 for the mufflers, $40 for the H pipe kit and whatever for the headers
The one on the right , I would need to buy some shortys, and a ypipe, and the kit is the flowmaster force II.
I need a complete exhaust system, so help me out. This isnt a WHATS THE BEST BRAND thing just want to figure out which would be better the pros and cons! Thanks in advance
__________________ Contact me if you need an Aluminum slave cylinder!!!
i would look into dynomax ultra flo round welded mufflers for the true dual setup. wont be as loud as glasspack, or bullets, but the round ultra is 6inch round so it will clear nicely. plus its a super high flowing design. they are about 60-70 bucks a piece
