ExhaustPost your questions and suggestions about stock or aftermarket exhaust setups. Third Gen exhaust sound files and videos!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Hey guys got some headers from a buddy came off of a 75 camaro and new there 125 dollers. better than paying 300 lol. im ganna make a how to thread on how to make these fit really easy, they fit but the flange hits between the trans pan and the chassis. So what u have to do is get some 3 inch pipe and cut the flange off before the pipes come together on the header. and then weld the new pipe on the header but pointing down a bit to clear the opening and make another bend up, with the old flange that u cut off and weld that on and then there u go u have a long tubed header from a 70's camaro that fits on ur third gen. ill get pics of the progress soon as i get the headers on.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ 86 camaro iroc-z
91 s10 pickup
Sponsored Links
Registered users do not see this ad. Click here to register for free!
Interesting... Still, I got my hedmans for $100. Correct headers for these cars arent necessarily expensive at all. But none are a perfect fit either, so maybe you're onto something.
yea hey i got them on and it sound awsome heres some pics of what it looks like under the car. and heres a vid camaro was alittle close and its not to good of sound but o well
Yea, I have to agree on the ground clearance thing. It is why these cars don't have true duals very often...clearancing them. Anyway, I wouldn't go over any speed bumps, lane reflectors, larger insects on the road...
Besides, I am pretty sure that the single 4" exhaust that runs back to the muffler and out the (2) 2" to 2 1/2" pipes from the muffler is more than enough flow for most applications.
i have low pros on the front cause i had the irocs on my s10. Hey pocket i drive the 2 tone s10. heres a pic of it u might have seen me around it's not lowerd right now tho stock hight. and i have my stock s10 rims on the back to lol putting fat tires back on it later.
heres what the camaro looks like right now
im putting the stock size tire up front i just havent put the rears back on yet.
----------
heres what the s10 looks like right now and i no its high lol those tires are going back on the camaro.
Last edited by camaro590; 02-24-2008 at 08:07 PM.
Reason: Automerged Doublepost
the tires i have on there arent even the right tires lol there low pros on the front 14's on back cause i had the irocs on the s10 in getting taller tires back on the front again and putting the rears back on it it will be higher again settle down lol. heres the tires i have on it right now cause im getting diff tires put on the irocs tommaorw.
not trying to hijack but im from lewisville maybe ill see you guys around. and nice s-dyme camaro950 i had one i was messing with , had it lowered custom paint, wheels, etc etc but someone totaled it for me. i want to get another one, ive got a nice 350 in the garage that would go great in an s10
not trying to hijack but im from lewisville maybe ill see you guys around. and nice s-dyme camaro950 i had one i was messing with , had it lowered custom paint, wheels, etc etc but someone totaled it for me. i want to get another one, ive got a nice 350 in the garage that would go great in an s10
alright man i found a couple s10 with v8's in k-ville for 1000 and one with a 383 stroker for 2000. i want to stick a v8 in my s10 some day.
if you dont mind me asking where are these s10's located in k-ville? i didnt think you could find them that cheap with swapped v8s in them. that would probably be cheaper than the route i was planning on going which involved buying a truck (i havent been able to find one for under 2500 that was stock) then buying little things for my motor i.e. headers, oil pan, dizzy, etc etc since all i basically have is a long block.
if you dont mind me asking where are these s10's located in k-ville? i didnt think you could find them that cheap with swapped v8s in them. that would probably be cheaper than the route i was planning on going which involved buying a truck (i havent been able to find one for under 2500 that was stock) then buying little things for my motor i.e. headers, oil pan, dizzy, etc etc since all i basically have is a long block.
i found them on the creigslists on of them is a 84 long bed 350 right off 66. and another one is whit shortbed in winston with the 383 full race engine he has 2 cams to go with it to make it street legal here is some pics of the one with the 383. its does need some inside work.
----------
ill try to find the page again for ya and ill link it.
----------
i think he sold it i cant find the ad but ill keep looking for ya.
Last edited by camaro590; 02-26-2008 at 08:10 PM.
Reason: Automerged Doublepost
