07-14-2009, 09:10 PM
|
#1 |
| Senior Member
Join Date: Feb 2009 Location: La Grange Park, IL
Posts: 930
Car: 1985 Camaro/ 1987 Camaro Engine: 305 TPI (400 in progress)/ 3.4l Transmission: T-5/T-5 Axle/Gears: 3.27 Posi/Disc / 3.42 Open | was removing exhaust manifold bolt and SNAP!
| as the title states, i was removing the exhaust manifolds from my 305 in prep for headers, get the drivers side off no problem, i get to the passengers side working from the outside in, i get to the last bolt and SNAP, bolt breaks flush with the head, no problem i think, i bust out ye olde drill and drill out the center clean through the bolt (didnt touch the water jacket, my bolts didtn go to the end of the holes) i soak it in PB over night and come back out with ye olde EZ out and i guess it was a little too ye olde becuase i just BARELY began to put pressure on it and SNAP, now ive got a cluster **** on my hands, suggestions? | | | |
 
|  |
