ExhaustPost your questions and suggestions about stock or aftermarket exhaust setups. Third Gen exhaust sound files and videos!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
The Magnaflow Y-Pipe offers wide-open flow versus stock parts
Enhances scavenging and horsepower
Crafted from 400 series stainless steel for corrosion resistance and longevity
Stamped merge section also reduces unwanted noise
Weld-on installation in place of your stock section
Your Magnaflow Y-Pipe boasts a Lifetime Warranty
Description
Restrictive crossover sections are a thing of the past, thanks to Magnaflow’s refined Y-Pipe section. Allowing a more wide-open exhaust path, the Magnaflow Y-Pipe encourages free scavenging that amps-up your horsepower.
Precision-crafted from 400 series stainless steel, the Magnaflow Y-Pipe features a stamped design that’s far less restrictive than stock crossovers. Beyond power gains, you’ll notice a reduction in unwanted noise, too—the best of both worlds.
What’s even better, Magnaflow’s Y-Pipe is custom-made for your ride and fits directly in place of your stock pipe. You can weld it on yourself, right in your own driveway, or pick professional installation. Best yet, your Magnaflow Y-Pipe carries a Lifetime Warranty.
I would be concerned on what their y-pipe consist of. The third gen camaro y-pipe is a lot more complex in shape then what the picture is showing. Hence why they are usually expensive to have someone custom make one or to buy from a company. For 27 dollars (hell even for the original price of 70) I would want to see proof from the company what the actual product look liked.
It's not a complete Y pipe, (IE from headers to cat). It is simply a merge, they are about 10" long, that "sale" price is about 10 cents cheaper than summit has them regularly.
It's not a complete Y pipe, (IE from headers to cat). It is simply a merge, they are about 10" long, that "sale" price is about 10 cents cheaper than summit has them regularly.
and with summit you will pay $4 or $5 bucks More for a handling fee..
up to like $12 bucks. for things like headers.. when you drop $10.000 into a fix in the last 3 weeks you start to shop !!
you could never get a SS Y part. like this at any shop for this price..
and with summit you will pay $4 or $5 bucks More for a handling fee..
up to like $12 bucks. for things like headers.. when you drop $10.000 into a fix in the last 3 weeks you start to shop !!
you could never get a SS Y part. like this at any shop for this price..
remember this is just 1 part of the Exhaust.
Not sure what exhaust shop you go to but the one I use the prices are usually cheaper than summit because they get exhaust parts direct from the distributor.
The sets of headers I have purchased have came with a Y pipe, Those would definitely be needed when making your own. Your question wasn't specific and someone response made it seem that you were asking if it was a complete Fbody Y pipe.
Not sure what exhaust shop you go to but the one I use the prices are usually cheaper than summit because they get exhaust parts direct from the distributor.
The sets of headers I have purchased have came with a Y pipe, Those would definitely be needed when making your own. Your question wasn't specific and someone response made it seem that you were asking if it was a complete Fbody Y pipe.
To Me..My Question was Specific.(try this place).and.. His Reasponse. Made it SEEM LIKE i was asking.about (a part). But if you look at the Link i posted.. you can see it's Just a Part.... and im aking about a Place.
and has for the exhaust shop.. i use the parts i pick out..
all i do is just have them weld it up..this way I get what I want..
the way i want it..
and when you Buy Hooker Header's 2210's in CC.. they dont come with a Y pipe you will have to have one Made. and this will Be just 1 part Of that. assbly..
Last edited by articwhiteZ; 11-11-2009 at 03:11 PM.
i bought 2 of those, chopped them apart and made my dual cat setup, 4" in 4" out and 2 3" bullet cats. Its a well made part, the quality was very nice. It was almost a shame to cut it up.
__________________ "i thought the plan was fool proof?"
"fool proof, yes. idiot proof, no."
Your question was specific, the response made it seem as if it was about a complete Y pipe. My bad, I get on at work and sometime I am interupted and dont get exactly what I mean in when I post.
i have not had any cats on my Z28 in 15+ years..(just lucky)
this is going to be from the hooker 2210 header's.. into 10" of 3" pipe on ea side.then
to 2. 3" Cut out's(1 on ea side) then into the Y and a single 3" catback out.
that way i can always open them Up.. simple
the old set up was
SLP SS 1 3/4" Headers into there Y pipe then into a edlbrk cat cat
(with out the Cats)..that was good for 11.70 passes..
Last edited by articwhiteZ; 11-15-2009 at 12:33 AM.
part came in today.. it is a nice looking part..well made.. SS life time warty.. sould work out fine..going to look to see if they have any 3" ss pipe..free shipping rocks (free is free) no added cost!
