You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i have a third kid on the way so i am going to try and sell off as much stuff as possible, all cars, all parts performance and stock, all parts cars for parts or whole,
e-mail with needs or due i need to make a list
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
The piece that goes over the rocker panel (from front wheel well to rear wheel well). Must be in mint condition (no cracks or tears). If you have it, where in NJ are you, I will pick it up. Also how much are you asking?
thats more then i want, i have a 3 year old , a 1 1/2 year old and the other one on the way, did not expect to have them this close in age, becides if i put a list up i would make you go nuts looking at all the stuff,
quick and simple the parts are located at 3 houses, taking up 4 sheds 1 attic 2 basements a good size cornner of the backyard, and 4 full size garages, there is alot of parts
yes i due what color due you prefer if i can help you with that, and how does $40 sound and witch side? located in toms river, but work just off exit 117 on the parkway,
Good luck with the third one. On the thread from yesterday I asked about the 5-speed shifter plate + the hurst shifter? You still Have? I'm putting a stick behind my 350. Do you also happen to have a scatter shield? I think you e-mailed me back yesterday but was about taillights? Thanks Again. John
thats more then i want, i have a 3 year old , a 1 1/2 year old and the other one on the way, did not expect to have them this close in age, becides if i put a list up i would make you go nuts looking at all the stuff,
quick and simple the parts are located at 3 houses, taking up 4 sheds 1 attic 2 basements a good size cornner of the backyard, and 4 full size garages, there is alot of parts
yes i due what color due you prefer if i can help you with that, and how does $40 sound and witch side? located in toms river, but work just off exit 117 on the parkway,
I'll take it. "Passenger side 1991/1992 ground effect" The car is black, but I'd rather take the one in the best condition over color. I can pick it up Monday or Tuesday, what ever is good for you. You can e-mail me at FrankTA2@aol.com
yes i due its a spohn one in black used for 1 week untill i put a t-56 in my convert, have brand ne spohn sun frame connectors in the box, hotchkis strut tower brace, stock wonder bar and a spohn wonder bar, also have spohn lower control arms, all gta seats need to be recovered, i think i have a good dash pad not sure if its camaro or pontiac,
yes i still have both, yes i have a scattershield, may have been,
i am off monday from work,not unless you want to come to my house to get it . i think the black one is the best one i have, will check
thats petes car he loves it cant wait untill he paints it,
have alot of parts what are you looking for. have cut up a bunch
how much for the spohn torque arm, is it tranny mount or x member mount? Spherical rod ends or polly bushings, and is it adjustable? very interested and cash in hand. lemmie kno.
Matt
__________________ Suspension Spohn Lower Control Arms, Spohn Panhard Bar, UMI Relocation Brakets, UMI Sub Frame Connectors, Tokico Illuminas, J&M Camber Caster Plates, 36mm/24mm Bars Exhaust Edelbrock TES Shorties, Random Tech High Flow Cat, SLP Loudmouth Cat Back Drivetrain 355, Holley 670, Vortec Heads, Comp XE268H, Comp 1.6RRs, Hurst Short Shifter, Three Rivers Aluminum Driveshaft, 3.73 10 Bolt, T/A Performance Stud Girdle Brakes LS1 Front and Rear, Drilled and Slotted Rotors, Hawk Pads, Earls 1LE Stainless Lines Wheels Eagle 077 18x9, Continental Contisportcontact 255/35/18, 275/35/18
1989 Chevrolet Camaro
1999 Jeep Cherokee Sport
I need the front lower chin spoiler ( i think is what it is called) below the front bumber cover for a 91 camaro RS. I also need a driver side door ground effects piece. The strip that goes down the door itself.
Thx
Lthrneck
Hey, I think those grilles should work . How much shipped to 27513 Cary, N.c.
And the power steering pump i would need a picture of to see it i could use that. Thanks
i am in need of l&r inner fender for 85 z28, no cracks or worn out mounting holes please, non ac heater control panel for same, wonderbar, piece that screws in across back interior that supports head liner in black (goes from side to side about 5 inches wide, don't know whatcha call it), and 1 strut tower cap in very good condition
dude! hold on dont u realize that when ur kids grow up there gonna but mad that u got rid of ur stuff , cuz when they need college money ur stuff will be worth money! and then thell thank you for funding their schooling, just ask my ol man, he sold his 57`bel air conv. his 63 impala 409 ss, and his cabalarro, when each of us came around! oops! how much is that stuff worth now? and like us he thought it wasnt going to b worth squat, he was wrong, and we all had to pay 4 college r selvs. but if he would have held on to the stuff we would have struggled when it didnt matter, when we wre kids we didnt no the difference between havin it good or havin it rough! just remember the third gen IS the last all metal all american muscle car ever produced,,, but any way good luck and congrats!
Do you have any aftermarket suspension pieces, interested in camber caster plates, struts, springs, control arms, lca relocating brackets, panhard rods, anything and everything suspension that is aftermarket. let me know if you have anything, thanks. Patrick
yes i due its a spohn one in black used for 1 week untill i put a t-56 in my convert, have brand ne spohn sun frame connectors in the box, hotchkis strut tower brace, stock wonder bar and a spohn wonder bar, also have spohn lower control arms, all gta seats need to be recovered, i think i have a good dash pad not sure if its camaro or pontiac,
Does this mean the above mentioned T56 may be for sale?
Do you have driverside cup holder (charcoal) for 91 ta?
__________________ 1991 Trans-Am (FOR SALE):
Stock 350 TPI, 1 5/8" Headers, Full Spohn Suspension, TB Foil, TB Bypass, Cold Air Intake, New Paint Job, 700R4 (Fully Built w/2500 stall), 3" full exhaust (no cats), 50 series Flowmaster, 3.23 Posi with disc brakes, Nitto 555R DR, MSD Blaster 3 Coil, MSD 6AL, 8.8mm Wires, SLP ECM Calibrator, SLP Runners, UD Pulleys, AIR Gone
Im looking for either a fiberglass bolt on hood that will fit a 84 camaro would like one with a scoop. Or an aluminium one with louvers. I would prefer functional but nonfunctional is ok. z-28, iroc or aftermarket.
If you dont have the whole hood would you have the louvers with the 8 pin mounting?
Also if you might have a windshild wiper control for the wipers for a 84 Camaro Berlinetta with the digital dash
Or if you would have any of the dash pods that hold the heater and light switches for the same Berlinetta.
Hey ted, i spoke to you emails a while ago i bought a black 88 iroc vert you used to own. I am wondering if you have a fuel sending unit for a carb'd camaro. If so how much??
