fallenleader

I have the front and back glass up for sale, dirty but in good condition. pick-up only, for sale around $50. hood is up, little rust, $50.

I have more, and a post on fbody.com
http://www.fbody.com/partsfs/51900

Anyway, i will help load and will remove things, car has less than 2 weeks. I am ahead of schedule trying to scrap it, taking out most of the parts to dump in my new 1984 bird. The junk yard doesn't care what is on it, they just want the metal.

engine is garbage, may be some useful parts. Ask me for pics and to see what else I may have for you.

fallenleader

ok, I will take ANY offers. Name your price. The smaller items, we need to talk about shipping (you pay shipping). I will keep everything I can fit in storage, so only the big stuff will be gone in a week or so.

I am selling good working parts, everything that can't be moved to the 84' because of A. different style and B. incompatable.

I have a bunch of stuff now, everything electronic that was in the dash "except gauges", the E-brake, the black plastic door panels, the plastic piece with the shift things on it "the ashtray door isn't included, it is broken, a new one can be bought and installed", the ECU for a 87' 2.8L automatic, the shift knob "is gray color, same as interior", some of the interior panels "were painted black, seems to be easy to clean off or re-paint", I have rear seat belt buckles, I will sell the seat brackets "needs some TLC but are expensive to buy new", The spare tire"rim is good", the bumpers.

Hell, I don't know, the scrappers only need a rolling piece of metal.

I can be contacted at here, fbody.com or fallenleader@fallenangelsclan.com

fallenleader

just like in the other forum, i'm probably going to get in trouble for bumping this, right?

the car is almost ready to go bye bye.

crazyL

Do you still have the MAF sensor? Im in 08012 NJ so hpoefully you do!

fallenleader

yeah, I will see if its ok, it was modified for a CAI but should still work.

Whats your price?

because i'm not positive, I don't really care if its single digits, just not $1

crazyL

CAI? Guessing thats cold air inake. I was going to use to for the ram air box that came with my hood. Should still be fine then right. Did you cut the little bend off? How about 5?

TADailyDriver

Heres a list of what i need let me know what you have

A pillar Driver side panel in black for t top car

Shifter boot for automatic w/ no tears or rips

Does the car have power mirrors? if so i need the passenger side mirror motor.

Radio/heater faceplate

I think thats all i need for now, just small stuff. Do you have any aftermaket parts that i may be interested in. If you can take pics and send them that would be great. Email is JSimba711@NetZero.com thanks!

fallenleader

yeah cut the bend off. and not a t-top model.

i just broke that faceplate the other day, it got under some stuff.

the mirrors are standard, the doors are moving to my other firebird. the doors on that are garbage but also have standard mirrors and locks with power windows.

I have almost completely stripped the car, I am in the process of examining and photographing the parts, will be keeping much more in storage than I anticipated. the only thing that is on a time limit is the glass.

For the hatch glass, it was originally going to be the glass only. the end piece from my 84' is coming off to be replaced with my 87's spoiler piece. the plain end piece is for sale.

the shift boot is garbage but the console face plate is good, except for the ashtray cover thing.

the drivers side plastic door plates are good + a right hand power lock plate.

bah, I am getting jumbled. V6, no aftermarket, sorry.

Just give me 2 days to photograph and post, its easier than me typing. "i'm not good at it"


BTW I am 08846 NJ, USA

TADailyDriver

i dont need the whole plate, just the boot, it unscrews from under the plate. if its good conditon ill take it.
----------
ok never mind i missed that part thanks anyways

fallenleader

I know what you mean. The fake leather thing. its gone, same with the one on my other firebird.

Anyway, the bumpers and badges are for sale, the side lamp things, the center part of the tail lights with the bird on it. Tail lights are garbage. the door that covers the gas cap. and a bunch more.

Again, i'm taking almost every useable part out and storing it so I will photograph more and post it all.
http://fallenangelsclan.com/firebird.aspx
Thats a page on my personal site. It will be updated, I make posts as it is.

fallenleader

Long day, tired.will try adding new photos tonight. pulling more engine parts tomorrow.

bob8703

pics of the bumper covers please. would like them to be in good condition.

fallenleader

ok, I will send pics, they have been painted black over the blue. I will check for damage but will sell cheap. name your price based on condition, please.

oh, they would cost a bit on shipping, based on size and weight. not sure the amount, so its up to you.

fallenleader

ok, got pics, will have them up shortly, no cracks, rust on the screws holding the black centers in, the centers are still black and unpainted "i was smart enough to tape that off when i painted" and parts of the frame of the front are rusty. bumpers don't seem to have any broken parts but the blue paint was flaking off.






sorry their still dirty, construction on the house its at, couldn't get a hose. I will clean them if you want 'em.

got the seatbelts up for sale, front and rear belts seem ok. But only the rear button things are in good condition.

I also have some hardware. show me a pic of what you need, or describe it well, I will see if I have it.

campin1983

What do you want for the center piece between the taillights? I see you said it has a drop of paint on it, but you think it can be polished off?

fallenleader

yeah, i will go see, it might just come off with a dish sponge scrubby side thing.

Will post a pic in a few min after its clean. Since its around 20ish yrs old, there are instructions floating around about polishing till its truely reflective. Didn't try but just dropping the info for everyone.

fallenleader

my honesty will be my undoing. anyway 2 cracks, nothing big, took paint off, just a blemish now. cleaned and wiped it down real good. a bit shiny but does have age.
Instructions to make it sexy are here. http://www.thirdgen.org/taillight_polishing

I wouldn't be satisfied unless it looked like his, my 84' had weird tail's so I'm not sure if I can make them shiny.




and i have a massive 2007x1044 resolution photo. It has 1 crack on the hole top left of the bird and 1 on the bottom right of the bird. Its just a crack but no broken off parts, a dab of superglue and don't overtighten it. thats how it cracked . I can e-mail you the full photo.

also, name a price.

campin1983

I wouldn't mind seeing the big photo. and where are the cracks, and how much are you asking?

fallenleader

well, thats the funny part. they're small and its only 1 on the top left and 1 on the top right. not like its shattered. i'm sorry about the stupid a$$ date, the lcd is broken so all the cam does is turn on and click, trying to figure out how the flash button works "for turning on and off and red eye crap" but theres no manual and no display.

http://www.angelfire.com/crazy/feeli...t/100_0580.JPG
the link will be easier than e-mail, just thought of it. you can right click save as, or click it and if your IE or firefox is set to "fit" the image, in ie it shows a little magnify icon for the cursor. just to display it in full. you should know all this just helping.

Honestly I don't know what its worth. classic industries says.
1985-92 Rear Center Panel Filler

If you’ve been involved in a rear end collision with
your 1985-92 Firebird, chances are you could use
one of these finish panels. Original GM rear center
panel filler mounts between the LH and RH taillamps.
G4851 1985-90 T/A, SE w/o emblem 165.95 ea
G4850 1986-92 std & Formula ......... 168.95 ea

1985-87 Tail Lamp Emblem
Correct emblem used with the tail lamps and rear
stop lamp assemblies. This emblem comes in black
and silver as pictured.
G8882 1985-87 silver ....................... 28.95 ea

its a pdf so you can go to classicindustries.com and download and search. for a photo of the parts, don't know why they're seperate.

obviously this is rediculous. so I ask you, what is it worth to you.

campin1983

i still don't see the cracks. are they on the non showing part? and how much do you want for it?

Mine is pretty much shattered.. and it doesn't match the car, its red

fallenleader

selling stuff is hard work I don't even know how to have people pay. I got paypal.

apparently there are some hairlines but only 1 is actually "cracked" as in you can wiggle it, the rest are more facial.

all 4 holes look similar but only the top left and bottom right ones are truely "cracked"

campin1983

Ah, i see. Great pics, how much are you asking? And I have paypal as well. You simply give the buyer the email address you use for the paypal account, and they submit payment using that as your user ID

fallenleader

I don't know, how about $150+S&H. "thats a discount "

...$30+S&H?


W/e + a little time before purchase, to learn how to ship stuff. I know how to package, just not all these new shipping options.

__________________
84' base+options firebird carb. V6 5 speed.
06' aerio sx premium. TeChNo BlUe

ΐ Ŗәắly tŗҰ ŦǾ wřitӘ přỚpễř

campin1983

You meant 30 plus shipping right?

fallenleader

yea. this will be the first product I have ever sold, online.
Junk yards are a different story...they suck, too busy.

__________________
84' base+options firebird carb. V6 5 speed.
06' aerio sx premium. TeChNo BlUe

ΐ Ŗәắly tŗҰ ŦǾ wřitӘ přỚpễř

campin1983

Ok. I'll do 30 plus shipping for it. UPS is the best route for shipping, as its the cheapest by far. Just be sure you pack it in a decent enough box with plenty of cushion. I've noticed if these things twist, the paint starts to crack and it is history (wasted 50 bucks learning that lesson).

You can estimate shipping online at UPS by putting in the box's measurments and weight. Shipping will more likely be based on the box's size rather than its weight, since this is a pretty light item. When its time to ship, you just take the box and my address to UPS, and they will take you through the rest.

PM me once you have a total estimate and your paypal email, and I'll wire the money to you.

fallenleader

Thanks, I hope you enjoy it. Wouldn't sell if i thought it was garbage. ...thats why I have been "finding" dumpsters and got 2big garbage cans full of junk crap parts.

I will pack with the infamous peanuts, if thats ok. We own a small store and always have bunches.

Edit: I just re-enabled the pm feature, normally keep it off on forums. get weirdos out of nowheres going "lets be friends" and such. i'll leave it on on thirdgen.org from now on.