You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Parting out a 1983 Trans am.
Car has Factory Powerbulge hood, good trans am fenders, with vents in good shape. All glass is good, Has The 82-84 trans am front grills, and complete body kit in superb condition, good headlights/motors. 4 wheel disc brakes, and posi, I am unsure of the ratio. There are many good parts still left on this vehicle, no motor or tranny. Large items must be picked up in Tampa/Wesley Chapel Florida.
Thank you.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Sponsored Links
Registered users do not see this ad. Click here to register for free!
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
hello i need the headlight wireing harness everyhting the turn signals side markers headlight and motor pretty much the whole for end harness mine was cut all up by the body goy if you can do this please email me back at alexdonenko@yahoo.com thanks
I can get that for you. Just let me know where to cut / unplug. What are you willing to pay for both headlight assemblies, and wiring?
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
I didnt get it off of craigslist. In fact, it wasnt listed anywhere. You wouldnt be interested in it when im done. There is no paperwork.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
What's the interior like? Console still in good shape? How much for the fender Vents and how much for the taillight bulbs, the ones that have the 4 cables on it, I think there should be one on each side.
Thanks
Cedric
__________________ My dream:
1982 Pontiac Firebird Trans AM
My cars:
1989 Pontiac Trans AM
2000 Chevrolet Blazer LT
What's the interior like? Console still in good shape? How much for the fender Vents and how much for the taillight bulbs, the ones that have the 4 cables on it, I think there should be one on each side.
Thanks
Cedric
Console Bottom is in good shape, top has holes cut into it for window switches. I have another top for sale, and another bottom. What exactly are you interested in?
Im not sure what you mean by taillight bulbs? You mean the rear harness that plugs into the taillights? Let me know, and I will pull it for you.
I have two sets of fender vents, one set has broken tabs on them, but they still mount. The set on this car, I havent removed yet to verify condition.
Ill Take $60 Shipped for the vents off of this car.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Come to think of it I'll just take all the rear plugs, yes I mean the harness , I don't need all the cable just like about 4 inches on each socket, see pic.
I'd be interrested in an entire console, top and bottom, depending on price and condition. Also the Vents as stated above if they have all tabs intact.
Can you give me a price on the 3 items? No "Shipped" prices please as I am in Switzerland so price will be higher for shipping Thanks Cedric
__________________ My dream:
1982 Pontiac Firebird Trans AM
My cars:
1989 Pontiac Trans AM
2000 Chevrolet Blazer LT
Last edited by Blackknight; 06-29-2009 at 11:23 PM.
Reason: Forgot Picture
Come to think of it I'll just take all the rear plugs, yes I mean the harness , I don't need all the cable just like about 4 inches on each socket, see pic.
I'd be interrested in an entire console, top and bottom, depending on price and condition. Also the Vents as stated above if they have all tabs intact.
Can you give me a price on the 3 items? No "Shipped" prices please as I am in Switzerland so price will be higher for shipping Thanks Cedric
It would be easier to send you the entire harness, its easy to remove and replace, Ide hate to have you hack your harness up.
I am removing these parts today, and will verify their condition.
I am unsure of how to even ship that far, but if your willing to pay shipping, I can work something out.
A non-shipped price for everything will be around: $120 or so
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
alright let me know what you have, also would appreciate a pic of everything once you have it all cnh (a) kt-s.net
Shipping is easy with USPS all you have to do is fill out that one customs form and that's it. You can even get a quote online for it once you have the weight and size of the box.
Cedric
__________________ My dream:
1982 Pontiac Firebird Trans AM
My cars:
1989 Pontiac Trans AM
2000 Chevrolet Blazer LT
alright let me know what you have, also would appreciate a pic of everything once you have it all cnh (a) kt-s.net
Shipping is easy with USPS all you have to do is fill out that one customs form and that's it. You can even get a quote online for it once you have the weight and size of the box.
Cedric
I got rained out today, and was only able to remove select parts. I will hopefully find time tomorrow, if its not raining, to pull your parts. I will hopefully have a final price for you tomorrow as well. Thanks.
I noticed in your sig, the Trans Am you want, has the smaller GFX pieces, small "Spats", I have a full set of these as well, if your interested.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
No problem just whenever you get around to it is fine. Are those GFX front and back? Are they in good shape? If so, then I'm interrested thanks for noticing
__________________ My dream:
1982 Pontiac Firebird Trans AM
My cars:
1989 Pontiac Trans AM
2000 Chevrolet Blazer LT
No problem just whenever you get around to it is fine. Are those GFX front and back? Are they in good shape? If so, then I'm interrested thanks for noticing
Yes, front and back, Ill try to get you pics asap. As it turns out, I cant get up there today either... Im sorry for the inconvenience, but florida weather is terrible. I will let you know when I get them all.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
posi disk rearend has how many miles?? howmuch shipped to 55124.
Odo reads 88.8k Miles.
Im not sure how to ship such a large item, Looking for around $200 for it.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
still got the front bumper air deflector? the ground effects for the front bumper?
if so how much shipped to 68114.
thanks
-alex
Yes I do, but once again, I don't know how to ship such a large item. Ill take $50 for it though.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Up.
I will be pulling parts monday. If you would like to see pictures of anything, let me know.
And Blackknight, I pm'd you some pictures a while back.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Car is gone.
Still have:
Doors
Grills
Rear bumper
All GFX
Rear seats
Lower Console
Throttle cable
Shift Cable
Headlights with motors
etc..
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
This car did not have a radio pod, but I have one from a 92. $50 shipped.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Do you have the power intake assembly, the air cleaner with a hole at the top, the headlight bezels and the front bumper flat "grilles" ?
I have the lid, but not for sale, and yes, I have the Flat grills still. Also have the bezels in good shape as well.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Allright, so how much do you want for the flat grills and the bezels ?
Not sure, your in france, get me an address, and I will se what I can do.
Yes, car HAD ac, its gone now. But what are you looking for, I may have what you need?
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
hey do you have a working headlight motor for the drivers side and how much would shipping be for 06468? thanks if possible could i have pictures too please?
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Rear GFX-
I dont think I can ship something that larg.
Door-
$60 obo
Thanks!
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Minimal dents, if any, a small rust bubble is on the front center of the door, but nothing major at all, overall great shape.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
This car is long gone, and they're long sold. thanks
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more