(PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
#101
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
Just curious about these:
Hardtop headliner in black (preferably cut for overhead console but no big deal)
Red GTA door panels and armrests (don't need the brackets)...
Need these:
That clip that holds the driver's side remote mirror stick in the trim piece
Antenna base nut for non-power antenna
Black hatch strut body bolt covers (the round caps and the clips on the other side, where the struts mount to the body)
Any 4th gen parts (preferably 93-96 Camaro) or 91-92 Birds?
Where in PA are you located?
Hardtop headliner in black (preferably cut for overhead console but no big deal)
Red GTA door panels and armrests (don't need the brackets)...
Need these:
That clip that holds the driver's side remote mirror stick in the trim piece
Antenna base nut for non-power antenna
Black hatch strut body bolt covers (the round caps and the clips on the other side, where the struts mount to the body)
Any 4th gen parts (preferably 93-96 Camaro) or 91-92 Birds?
Where in PA are you located?
#102
Junior Member
Join Date: Jul 2011
Location: NEPA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro Coupe
Engine: currently building a 355
Transmission: unsure what it will end up with
Axle/Gears: 10 Bolt 2.73
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
Do you still have doors? How often do you come to Towanda, PA? I don't live far from there. Also do you have a v8 tranny or posi rear axle?
#103
Junior Member
Join Date: Jul 2011
Location: Boston, MA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am
Engine: Supercharged 383 stroker
Transmission: T56
Axle/Gears: 4:11, 12 Bolt
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
I am looking for some brake parts and need the following:
e-brake cables (either complete or the rear two)
both rear calipers
2 caliper brakets (sometimes called girdles)
and any rear brake lines (rubber and metal)
let me know. thanks, Mike
e-brake cables (either complete or the rear two)
both rear calipers
2 caliper brakets (sometimes called girdles)
and any rear brake lines (rubber and metal)
let me know. thanks, Mike
#104
Junior Member
Join Date: Nov 2013
Location: Bellingham Ma
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z
Engine: 5.0 4bbl
Transmission: 700-r4
Axle/Gears: 2.73 G80
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
WINDSHIELD WASHER NOZZLE??
#106
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
I have everything you need I think, brake lines are probably best if you just buy new but its up to you. Just let me know. Thanks!
#108
Junior Member
Join Date: Nov 2013
Location: Bellingham Ma
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z
Engine: 5.0 4bbl
Transmission: 700-r4
Axle/Gears: 2.73 G80
#109
Junior Member
iTrader: (3)
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
Was wondering if you had the following spoiler to fender brackets?
https://www.thirdgen.org/forums/exte...g-bracket.html
Thanks, -CB
https://www.thirdgen.org/forums/exte...g-bracket.html
Thanks, -CB
#110
Member
Join Date: May 2009
Location: Paris, tn
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Z28, 1991 RS
Engine: 350 Carbed, 305 TBI
Transmission: 700r4, t5
Axle/Gears: 3.23s posi Limited Slip, 3.08 posi
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
have any black seat belt guides ?
#111
Junior Member
Join Date: Jul 2011
Location: NEPA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro Coupe
Engine: currently building a 355
Transmission: unsure what it will end up with
Axle/Gears: 10 Bolt 2.73
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
What kind of shape are the doors in? How much are you asking for them and how often do you come to Towanda, PA. Or was that just an offer to meet another user part way? Also What are you asking for the posi rear and what is the gearing and are they drums or disc brakes?
#112
Member
Join Date: Sep 2011
Location: P.A.
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 T/A w/WS6
Engine: 5.7L V8 TPI
Transmission: 700r4
Axle/Gears: 3.23 w/ posi
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
Hey,
what kind of shape is the driver side fender on the '86? any dents or rust?
same goes for the bumper cover and bumper bar, how are they looking?
thanks
what kind of shape is the driver side fender on the '86? any dents or rust?
same goes for the bumper cover and bumper bar, how are they looking?
thanks
#114
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
Was wondering if you had the following spoiler to fender brackets?
https://www.thirdgen.org/forums/exte...g-bracket.html
Thanks, -CB
https://www.thirdgen.org/forums/exte...g-bracket.html
Thanks, -CB
#116
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
[quote=88iroc86z;5691326]What kind of shape are the doors in? How much are you asking for them and how often do you come to Towanda, PA. Or was that just an offer to meet another user part way? Also What are you asking for the posi rear and what is the gearing and are they drums or disc brakes?[/quote
Most of the doors I have are in fair shape but have some rust and minor dings, I guess price depends on what you would want. Usually I can bring stuff up to the Towanda area once a week, I can have it in Rome PA to pick up for you or depending on my schedule I could meet you in Towanda. What gear ratio are you looking for? Thanks!
Most of the doors I have are in fair shape but have some rust and minor dings, I guess price depends on what you would want. Usually I can bring stuff up to the Towanda area once a week, I can have it in Rome PA to pick up for you or depending on my schedule I could meet you in Towanda. What gear ratio are you looking for? Thanks!
#117
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
The driver's fender is fair I suppose, it has some surface rust (minor) and a few dings that look like they will pop out once the fender comes off. The bumper cover is decent if I remember correctly, it may have a minor boo boo at the bottom point of the nose where they usually go when they bottom out but nothing too severe. And as for a bumper bar do you mean the impact bumper?
#119
Member
Join Date: Apr 2011
Location: Philadelphia, Pa.
Posts: 214
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28 H.O.
Engine: 5.0. L69
Transmission: Automatic
Axle/Gears: 9 bolt disc 3.27 Posi
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
Hey, by any chance do you have a decent set of front seat belts? I need the receiver side, as with many of these the plastic covers that hold them up are all cracked.
#120
Junior Member
Join Date: Jul 2011
Location: NEPA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro Coupe
Engine: currently building a 355
Transmission: unsure what it will end up with
Axle/Gears: 10 Bolt 2.73
#123
Junior Member
Join Date: Jul 2011
Location: NEPA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro Coupe
Engine: currently building a 355
Transmission: unsure what it will end up with
Axle/Gears: 10 Bolt 2.73
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
That is me. I am looking for the steering wheel in the photo. I am also looking for the gauge bezel, e brake "****" handle in the photo as well. If it is easier to talk via email just send me a message there thanks.
#126
Member
iTrader: (10)
Join Date: Mar 2007
Location: Dearborn Hgths Mich
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc Z 28
Engine: 355/ 600 Holly
Transmission: 700R4 shift kit & vette servo
Axle/Gears: 9 bolt 3;70s
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
You wouldn't have a grill for a 87 Camaro Sport Coupe would you. If you do could you send pics and price shipped to 48127 in Mich. to rgoodnough9982@wowway.com
Thanks
Thanks
#127
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
You wouldn't have a grill for a 87 Camaro Sport Coupe would you. If you do could you send pics and price shipped to 48127 in Mich. to rgoodnough9982@wowway.com
Thanks
Thanks
#129
Junior Member
Join Date: Nov 2013
Location: Bellingham Ma
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z
Engine: 5.0 4bbl
Transmission: 700-r4
Axle/Gears: 2.73 G80
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
how much for spare tire?
#131
Junior Member
Join Date: Jun 2012
Location: Houston TX
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: 305 TBI ... (Not for Long!)
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
Do you have any decent quality Rear bumper covers, looking for one that would match up with the 88 style ground effects.
#133
Junior Member
Join Date: Nov 2013
Location: Bellingham Ma
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z
Engine: 5.0 4bbl
Transmission: 700-r4
Axle/Gears: 2.73 G80
#134
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
I'm looking for a passenger side lower ground effect for an 82-84 Z28. I saw on the first page I may be a little too late, but if you've got another what would it run shipped to Alabama 35466?
#136
Junior Member
Join Date: Nov 2013
Location: Bellingham Ma
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z
Engine: 5.0 4bbl
Transmission: 700-r4
Axle/Gears: 2.73 G80
#137
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
Just got your post, sorry for the delay. The 84 had 85-90 ground effects on it so unfortunatly they won't work for you. I don't think I have one but I can double check and if I come across anything I'll let you know. If I do find one it would be $50 shipped. Thanks!
#139
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
Sounds good. I remember a local yard had an 84 so next time I'm over there I'll check if it is any good, if the car still exists or if the ground effects were wrecked by the loader operator. Thanks!
#140
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: check under the car
Posts: 1,143
Likes: 0
Received 4 Likes
on
3 Posts
Car: White 25th Anniversary RS
Engine: lt1
Transmission: t56
Axle/Gears: 4:10
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
I need 4 receivers for the seat belts. Black is best
#142
Junior Member
Join Date: Aug 2012
Location: myrtle beach,sc
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Iroc
Engine: 496
Transmission: 4l80e
Axle/Gears: 9" eaton posi 4:11
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
need a front bumper cover for my 86 Camaro.
#144
Junior Member
Join Date: Sep 2013
Location: New York
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 iroc z28
Engine: 305 TPI
Transmission: TH700R4
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
how much for the 87 center console cover? also i have an 87 iroc z28 any change on wiring harnesses?
#145
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
The vinyl on the lid is shot but if you want the lid to re-cover $25 shipped and it's yours. As for the harness, the one from the 87 was sold already. Also, you'll need a harness from the same car as yours, if yours is a 305 car you'll need a 305 harness, 350 needs a 350 harness. Thanks!
#147
Junior Member
Join Date: Sep 2013
Location: New York
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 iroc z28
Engine: 305 TPI
Transmission: TH700R4
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
The vinyl on the lid is shot but if you want the lid to re-cover $25 shipped and it's yours. As for the harness, the one from the 87 was sold already. Also, you'll need a harness from the same car as yours, if yours is a 305 car you'll need a 305 harness, 350 needs a 350 harness. Thanks!
#148
Member
Join Date: Jan 2003
Location: Long Island N.Y
Posts: 371
Received 12 Likes
on
12 Posts
Car: 1988 Pontiac GTA
Engine: 5.7 l98
Transmission: 700r4
Axle/Gears: BW 9bolt with torsen carrier
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
trans am fog light mounting bracket . right side
#150
Junior Member
Thread Starter
iTrader: (2)
Join Date: Dec 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: Too many!
Re: (PA) Parting Out Multiple Camaros / Firebirds / Trans Ams
Unfortunatly the vinyl is no good, if I come across one I'll let you know. I know I have one for sure but I was saving it in case mine would ever crack. Usually the way things work is if I sell the one that I'm saving mine will crack the next day