03-08-2009, 11:53 PM
|
#1 |
| Senior Member
Join Date: Mar 2003 Location: Gladstone, Missouri
Posts: 1,148
Car: 91 Camaro RS Engine: 5.0L TBI (ebl inside) Transmission: T-5 Axle/Gears: 3.42 lsd 10 bolt | Automatic Belt Tensioner Redesign
For the last two years, I have ran without an ac compressor/delete pulley and smog pump pulley, by using a grooved tensioner pulley. Well, I am changing the air intake and need to mount the tensioner lower. So I have decided to put a new bracket with tensioner in. I am trying to modify something that was factory but not as bulky as the factory one.
Right now, I am shooting for something that uses two of the front bolts in the head and retains the stock alternator, power steering, crank, and water pump setup. I have measured the depth to the inside of the pulley to 6 inches, but can someone give me a more precise dimension. | | |
__________________
91 S10 4x4
96 Saturn SL1
After 2525 days, 3rd gen-less |
 
|  |
