Anyone have a link to where i can buy some to work with this style rod end http://www.summitracing.com/parts/HAL-XMR12/ while keeping the rod end center in both the panhard and lac brakets?

The panhard brakets are 2" width and the lca's brakets are 2.5" width, right?

doesn't spohn sell these?

Spohn does sell them... they have eveything you'll need

http://www.spohn.net/shop/Replacemen...ngs-Coil-Over/

UMI sells the offset bushings for the LCA's too...

http://www.umiperformance.com/catalo...jit0v304cspon7

Too spendy. UMI i will go with if i cant find a diffrent set thanks for the link and help tho

You could always buy aluminum stock and machine it down to get a custom offset. If you have access to a lathe, this would probably be the cheapest.

Otherwise you could probably take the metal to a machine shop and they could probably do it cheap.

Yet another option is to take the metal to a tech school. Talk to one of the shop teachers and see if you can get it cut. Sometimes they'll do it for free because it is a good learning experiance for the students. If for some reason they aren't in spec you'll probably only lose ~$5 in material costs.

Just my $0.02
Mike

yea thats what i was thinking too just pick up some stock and turn it down. alot of time invold tho. Great idea on the school. . .

24bux is too spendy? you will not find them cheaper. Even if yoiu try o make them yourself. Just buy them and be done.

or check out these people, but i dont know if it will be cheaper

http://www.midwestcontrol.com/

not UMI spohns . . .

Hello,

We can also sell the ones that keep the rod end centered in the mount rather than off set. They would be $6.00 per rod end

Hope that helps!
Ryan