FAQ BoardThis board is where some of the most informative and helpful Frequently Asked Questions we get here at ThirdGen.Org are put for easier reference. This IS NOT a general question board.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I keep seeing people talk about getting these. What is it?, the clutch master and slave cylinder and resevoir that comes filled and pre-bled? What is the part number, and how much is it? I am assuming I could get it from any chevy dealer?
My stuff is leaking, everytime I push in the pedal a few drips of brake fluid leaks onto my floor.
it's pretty much what it sounds like, all the parts connected by a line and prebled. gm is the only source i know of. do a search i think the PN has been posted here before
__________________ MM Black Diamond 538 F&AM
Ex quocumque facere poteris te sauciabit, nihilo comprehenso.
what ede said. i bought the entire assembly when i swapped my auto for the tko last january. i'll check back when i get home and post the part number if you haven't got a reply yet by then.
any gm dealer should be able to order it though. shouldn't be too hard to find... i don't think that they sell the components separately any more.
There's a bunch of part #s, at least 4 last time I checked. I have no clue what the difference is. I can tell you that when I needed one, my local dealer network didn't have the one that would have been most logical for my car (I have 84 stuff in my 83 car); so I tried for the next most logical, which was 87 or something, no luck there either; but, they had the one for a 90 or some such, so I bought it. Fit perfect and works great.
Expect to pay a little over $100, maybe $120.
__________________ "So many Mustangs, so little time..."
awesome guys, yeah I was doing seaches and I could find anything becasue I didnt know what to exactly call the part. I will have to stop by gm tommorow and order one. thanks alot!
I just got that assembly through my work today, the part number from GM is 12527718. Thats the entire assembly, slave, master, resevoir, and the lines. Pre-bled, full, ready to install.
It costs right at about $100
__________________ ABird4U2NV
1989 Formula Firebird (RIP 11-8-05)
1991 Camaro RS
Goodwrench Crate 350 4bolt main, Comp Cam .454in/ex, Pete Jackson Gear Drive, Edelbrock Performer RPM Intake, Carter AFB 750cfm, Accel HEI, Hedman Hedders, Gutted Cat, 40 series Flowmaster, 700R4(Almost to be freshened and built), 10 bolt 2.73 Open(Another issue all together)
Last edited by Abird4u2nv1; 05-10-2004 at 04:24 PM.
