I bought the car a little over a year ago, selling to get a house, it has the original 305 tpi , heads rebuilt @8k ago, trans totally rebuilt less than 2k miles ago with 2200 lock up stall corvette servo and .5 boost valve, msd ignition coil and 6al box, custom ws6 door panels, over head console with flash light, ttops, pmd seats, good dash pad,aluminum drive shaft, 140mph cluster, great console,tinted windows, repainted 7 years ago by previous owner, new carpet, currently has a 10 bolt 2.73 with aluminum drums w/new shoes and springs, new front brake rotors,pads and calipers, new weather stripping,. The car will come with an l98 cam,19# bosch flow matched injectors matched to 2% by cruzin performance, valve covers, aluminum113 heads 80k miles, headman shorty headers and y pipe, umi powder coated subframe connectors nib, cross drilled front rotors nib, rear cross drilled and slotted rotors with 6k miles, 10 bolt 3.42 pbr rear end with 80k miles repainted, a set of rebuilt 601 heads that were milled to 53cc and totally rebuilt with swirl intake valves, knurled, new springs, shims, offset locks( I ported 1 of the heads and the other is untouched as I havent had time), a 355 with 0 miles, 4 bolt main, x rods, polished crank, new water pump, timing chain, I was told the piston are forged but I dont know that for sure, it has a new comp cams 262 extreme engergy cam with new lifters, sfi flywheel, and oil pump,..... another mint dash pad, set of used 1.6 roller tip rockers and poly locks, gm 1.6 full roller rockers with poly locks nib, set of red ground effects full from the front tire back. All the hood and trunk shocks work, rear hatch motor works , have locks for doors and hatch that match the ttops, also have another set of 4 oe charcoal grey crosslace rims with kumohs on the back ( only 3k on em) have a bunch of recipts, also have misc parts( door panels, fenders, hood, serp set up, gta door panels, vss cluster for 91-92. Looking for 7500 obo email ss10dittem@yahoo or pm here. Im located by Midway airport in Chicago

Here is a link when I was making my door panels... http://www.thirdgen.org/techboard/at...icture-007.jpg

bump you wanna sell that spare set of crosslaces?

Sorry, Im only going to sell everything together...I also have a spare tpi setup, felpro overhaul gasket kit for the 305, a felpro gasket kit for the tpi intake, a new master cylinder, 2 wings from 91-92 transams and a bunch more.... heres a boat load of pics..sorry shes really dirty in these pics..also the black silicone I used for the weather stripping faded to a grey yellow, I found out that black caulk is the way to go so it wont fade, not a big deal I could remove and reseal the siicone if need be,, vin tags on every panel except pass fender

more pics......

now some good stuff.... Ive also got a spare set of lcas and energy suspension bushings for em and 8.8 ignition wires, the 305 has a 160 tstat with a hypertech 176 fan switch, new cap, rotor,plugs,belts and I and the previous owner of 8 years have always ran mobile 1 full synthetic oil, the differential fluid was change @4k miles ago, the brakes have less than 6k miles, I have 2 k&n filters for it as well.

thats a hell of a deal sorry to see you selling your car btw did you ever get those subframe connectors on

Thanks Mark, no I havent installed them, still nib lol, did you end up getting the motor together? I have been really busy with the baby on the way so I never got a chance to pull the 305 nore will I have the chance anytime soon so Im looking to sell it all for cash or possibly a trade forgot its got a brand new battery also... heres more pics... I just realized I stated it was a 262... Its not.. its an xe268h..224/230-.477/.488 110lsa

Hey, I bought the rear crash bar form you not too long ago. Good luck and congrats on the kid! Are you selling any of this stuff separate? I was interested in details and prices on the motor and repainted rear. Thanks

Thanks, If I dont get it sold as a whole then Ill start putting parts on the car. The rearend, motor and all the performance parts are going on it.

$7300

I'm interested in the SFCs, if it ever comes to you selling parts.

sfc ? Not sure what your talking about.... Ive been at the Hospital since Tuesday,, finally got my first baby boy at 1:18AM Friday, heading back there now. thanks

Congrats on the little boy! My little girl was 1:19Am....6.5 yrs ago....

SFC.......Sub Frame Connectors

Just got back from the hospital today with the little guy, if it doesnt sell Im planning on using most of what I have and making it a real nice TA but you never know.

Had him 1 day...Your already referring to him as"it" & trying to sell him????

Congrats man! It's the second happiest day of your life (unless he isn't your 1st child...No ranking of which birth is "more important", of course)

Hes my first,,,and last lol, and no hes not for sale. Not until hes atleast a teenager and then maybe Ill lease him for those years if he acts anything like I did.