You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
originally a project car, now has more than $20,000 invested. Brand new eng. and 6- speed transmission. all new hotchkis suspension front to back. even has new light weight tubular k-frame.fully built sbc 350 (actually a 355) . originally out of a 1964 nova ss 327. bottom end replaced with all forged internals as well as a 350 crank. bored .40 over. eagle rods and light weight pistons (floating wrist pins). the original 2.02 camel humps were convereted to 2.06 with hardened valve seats. stud girdles are in place with 1.3 rockers, 11" push rods and mechanical rollers. the cam is a lunati voodoo .600 lift . moroso 7 qt. oil pan with high volume pump. fluid dampener. full march performance underdrive pulley and bracket set. all msd ignition (billet distributor, 6al, blaster coil, and wires) full balance on eng. including clutch safe to 8000 rpm
over 6500 in the eng. and 2500 in the trans Transmission is a rebuilt t-56 from an lt1 engine with carbon synchros installed. lightweight (14lbs) flywheel from fidanza is new as well as the dual friction 600 ft/lbs clutch from zoom
come drive and see if you like it before you buy
contact larry at 7278580311 at anytime feel free to e-mail at lordtoad944@aol.com . must drive to appreciate what the car was built for. if you want pictures just send an e-mail and i would be more than happy. contact lawrence anytime at 727-858-0311. dont hesitate for any questions
Last edited by lipstick944; 02-26-2009 at 05:47 PM.
