[NJ] 1987 Trans am GTA hardtop roller/project $650
08-02-2014, 01:45 PM
#1
Member
Thread Starter
iTrader: (18)
Join Date: Jan 2014
Location: NJ
Posts: 412
Likes: 0
Received 1 Like
on
1 Post
Car: 90 formula, 89 formula 350 vert
Engine: 305, 355
Transmission: T5, t56
Axle/Gears: 3:45 9 bolt, 8.8 3:73
1987 Trans am GTA hardtop roller/project $650
1987 gta roller was a 350 car and was red on tan and is now black on gray/black. Has 140k miles on it
Here's a quick rundown
Exterior:
- body is in decent shape no big dents or rust issues only flash/surface rust that will clean easily
- ps fender was scraped at one point and will need work or replacement( I could swap these fenders for ta fenders if desired.)
- drivers door has a cut on the top inner brace for some reason not noticeable when the door panel is on
- doors shut very nice with almost no effort
- has a new battery tray welded in welds just need to be ground down
- car was completely undercoated on the inside preserved the floor pans nicely
- hood is white from another car, hood struts work
Interior:
- headliner and sunvisors are brand new/recovered (black)
- carpet is also brand new but cut a little short by console not terrible but noticeable (black)
- plastics and seatbelts are gray. Plastics are painted black but I am working on removal. No front seats included. Rears are gray leather fair shape
- has overhead console, power mirrors, power windows, good working hatch release, auto dimming mirror
- gray gta door panels. Black plastics across the top uncracked
- console and radio pod are junk. A replacement radio pod is included
- factory radio is gone in its place is an older alpine
drivetrain:
- the car was a 350 auto but the motor and trans are gone
- dual fan setup was converted to a single fan
- original 9 bolt was sold by the PO in its place is an open 3:42 10 bolt
- the gas tank and lines are currently out of the car. I have a carbureted sending unit and lines or a tpi pump and lines. Ill Include whichever set you want
Overall it's a nice solid car that would make a great project. The car has a clear PA title. $650. If you have any questions or want more pictures feel free to pm me. I have a bunch of parts to put this car together from other cars that can be negotiated into the deal.
Here's a quick rundown
Exterior:
- body is in decent shape no big dents or rust issues only flash/surface rust that will clean easily
- ps fender was scraped at one point and will need work or replacement( I could swap these fenders for ta fenders if desired.)
- drivers door has a cut on the top inner brace for some reason not noticeable when the door panel is on
- doors shut very nice with almost no effort
- has a new battery tray welded in welds just need to be ground down
- car was completely undercoated on the inside preserved the floor pans nicely
- hood is white from another car, hood struts work
Interior:
- headliner and sunvisors are brand new/recovered (black)
- carpet is also brand new but cut a little short by console not terrible but noticeable (black)
- plastics and seatbelts are gray. Plastics are painted black but I am working on removal. No front seats included. Rears are gray leather fair shape
- has overhead console, power mirrors, power windows, good working hatch release, auto dimming mirror
- gray gta door panels. Black plastics across the top uncracked
- console and radio pod are junk. A replacement radio pod is included
- factory radio is gone in its place is an older alpine
drivetrain:
- the car was a 350 auto but the motor and trans are gone
- dual fan setup was converted to a single fan
- original 9 bolt was sold by the PO in its place is an open 3:42 10 bolt
- the gas tank and lines are currently out of the car. I have a carbureted sending unit and lines or a tpi pump and lines. Ill Include whichever set you want
Overall it's a nice solid car that would make a great project. The car has a clear PA title. $650. If you have any questions or want more pictures feel free to pm me. I have a bunch of parts to put this car together from other cars that can be negotiated into the deal.
Last edited by Eric-86sc; 08-24-2014 at 01:49 PM.
08-10-2014, 10:53 PM
#2
Member
Thread Starter
iTrader: (18)
Join Date: Jan 2014
Location: NJ
Posts: 412
Likes: 0
Received 1 Like
on
1 Post
Car: 90 formula, 89 formula 350 vert
Engine: 305, 355
Transmission: T5, t56
Axle/Gears: 3:45 9 bolt, 8.8 3:73
Re: 1987 Trans am GTA hardtop roller/project $650
Bump o/bo
Last edited by Eric-86sc; 08-11-2014 at 10:20 AM.
08-21-2014, 08:37 PM
#3
08-24-2014, 01:54 PM
#4
08-24-2014, 03:02 PM
#5
Member
Join Date: Jun 2014
Location: South Jersey
Posts: 360
Likes: 0
Received 3 Likes
on
3 Posts
Car: 88 GTA Notch/01'WS-6 VERT
Engine: 5.0 LB-9/5.7 LS-1
Transmission: 700R-4/4L60
Axle/Gears: borg warner 3.27's
Re: 1987 Trans am GTA hardtop roller/project $650
ever wanna part it let me know.
08-29-2014, 11:14 PM
#6
Member
Thread Starter
iTrader: (18)
Join Date: Jan 2014
Location: NJ
Posts: 412
Likes: 0
Received 1 Like
on
1 Post
Car: 90 formula, 89 formula 350 vert
Engine: 305, 355
Transmission: T5, t56
Axle/Gears: 3:45 9 bolt, 8.8 3:73
Re: 1987 Trans am GTA hardtop roller/project $650
Car is sold and going to a good home.
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
04-30-2019 12:14 PM
The_Phoenix
Interior Parts for Sale
12
02-04-2016 07:10 AM
beachrodder
Tech / General Engine
7
08-25-2015 08:05 AM