Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
still awaiting your reply to see if you can fix my factory radio and add the ipod input to it. the radio seems to have been working fine it just only puts out to one speaker. if you cant fix it id be interested in the yellow letter style with tapedeck that came in the 92 z-28's. thanks!
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
Sorry. Been busy with things around here. Just got my garage finished wiring and dont even have tools put away yet. Plus seems like Im having to fix one of the lawn mowers every week. I believe I have all the parts here I need to start doing this again
I just picked up a battery charger (for the lawn mowers go figure ) with a 50 amp quick start so it should serve as a power supply
Ill try and get all my crap organized tomorrow and see if any of these radios I have are any good
To Joes407, sorry, I cant really repair much on these radios.
Jediknight912, Ive never comes across one of these and I doubt I ever will. Those cars are pretty picked over by the time I get there
My86, Ill have to look. Ive got a billion things packed into 11ty boxes
Ill try and get back to this as I just got an 81Z28 and am wanting to build a 450+HP 383 stroker and could use the funds
Not a third gen but I like her
Last edited by BigBadJohn; 06-02-2009 at 10:17 PM.
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
Quote:
Originally Posted by joes407
is there a way to swap the faceplates on these radios. if i bought a modified one from you and put my yellow lettered faceplate on it?
As long as it was the eaxact same faceplate with buttons in the same spot
Youd have to be very careful with the 4 plastic tabs on the back sides of the faceplate. They can break easily
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
I was checking to see about the 87 radio John also is there anything you are looking for for th esecond gen you have. a friend of mine had some stuff sitting around he had asked me about before I am not sure what all was there or if he even still has any of it but I can check if you are looking for anything.
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
I don't know either I have pm'd him and e-mailed and posted with no response. Either he is busy (which I am sure is the case) or he doesn't want to make any money. I am definitely down for one when/if he decides to do them again. He has been on everyday that I have checked but hasn't posted on here so it is anyone's guess.
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
anybody else get a response from John? He pm'd me and said
"Hey whats up. Sorry. Dont go on the internet too much. Especially since spring. Between mowing, fixing mower, and getting an old pickup and camaro I havent had time to get the elctronics stuff out.
Ill try and fit in tomorrow. At least testing and verifying Ive got a good deck for you anway. Ive got a few decks with the pre 89 plugs that I know of off hand "
but that was on the 24th of last month??? probably too busy to worry about it now
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
Quote:
Originally Posted by jstoltz
anybody else get a response from John? He pm'd me and said
"Hey whats up. Sorry. Dont go on the internet too much. Especially since spring. Between mowing, fixing mower, and getting an old pickup and camaro I havent had time to get the elctronics stuff out.
Ill try and fit in tomorrow. At least testing and verifying Ive got a good deck for you anway. Ive got a few decks with the pre 89 plugs that I know of off hand "
but that was on the 24th of last month??? probably too busy to worry about it now
I have not heard anything from him. In fact I am thinking of checking other places to find someone that can do this. I figure I will give him another week or so and then I am going to start looking elsewhere. I have some shows that are several hours away that I want to take my car to and this would be REALLY nice to have for those trips..
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
Hey guys, I don't mean to jack the thread or anything, but if anyone is interested I have one of John's 89+ decks that I don't need anymore. PM if interested.
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
you could always make a harness using the 3 plugs which you can find on ebay and then the 2 plugs from an 89+solder and heatshrink the wires. If you get the plugs I can do it for $10.
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
Found a place on the web that does conversion harnesses for early to late and late to early; very reasonably priced, too. Dunno where the stupid link is, think I found it on the desktop at home, will be lost in the wilderness of MS Vista! Started the search with google, so it can't be that hard.
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
Man I have been wanting to do this to my car for the longest. I will almost for sure send in my radio for this mod. Please keep doing this!!
__________________
This is my 1987 Sports Coupe Chevy Camaro. It is first car. So far these are the mods:Edelbrock Performer Intake manifold, larger jetting on the carb, hiflow cat, flowmaster muffler, NAPA aluminum hiflow waterpump, Hypertech chip(not much difference, but its there), MSD 6A ignition box, MSD GM blaster coil, and MSD rotor and cap. Right now I have no major plans for it being that it is my daily driver for going to school and work fulltime, but I'm always looking for little things to do to it. I have more pics at my cardomain page: http://www.cardomain.com/ride/2315311
Re: Delco radios with iPod inputs installed. Both radio harness types 82-88 and 89-92
Hey,
Wondering if you were equipped to start modifying radios again? If so, Im interested.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
) with a 50 amp quick start so it should serve as a power supply
