You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Cleaning out the garage of all parts. If you need it, i may have it unlisted, otherwise i check junkyards relatively frequently and might be able to get you the parts you need. Most prices i will negotiate on, otherwise i will do my best to combine shipping if i can. Let me know what you guys need. Here goes:
sorry guys, i never got a notice that this was updated. If anyone still needs anything, feel free to PM me. As far as the switches, if you are still interested, PM me and i will get to it immediately. As far as the round style shifter ball, i don't have one. My appologies.
I noticed the coolant overflow tanks. I need one without cracks, (obviously). How much to 64118?? I didn't see it, but I'm also looking for an accelerator pedal assembly.
The cost to ship will be $ 8.45 plus the cost of the tank. Total $13.45 (shipped)
You will get a tracking number from the us post office.
My paypal is jjjwis@pronetisp.net.
jon
I have someone going down to Long Island a week from now to make a few deliveries, she's not terribly familiar with the area so she can only have you meet her. She's comfortable meeting by the Nassau Coliseum at the Marriott Hotel in Uniondale. Anyone that needs any of these parts, contact me relatively soon!
Here is a link to those who haven't already looked:
It's been map quested to roughly 20 minutes out of the city. Any parts that you may need, feel free to ask as i haven't taken pictures or inventoried everything that i have. Thanks.
I have three overflow tanks available, and the last person backed out of the one i had in good shape. I will get you a quote hopefully today, if not tomorrow, i need to find a box that will fit the length of the crossmember and the height of the overflow tank. I will get back to you! Thanks.
Just spoke with you on your thread, i will be checking thursday when i make a trip to my shop to see if i can find out of the 5 shifters that i have if i can get you something you can use.
Mario, i'm working on a box, should have that quote by tomorrow, and MAGIC, you have a PM.
Also was cleaning up a little and found a couple interesting pieces. Pictures would have been better if i could find batteries that work for my camera, so these are from my cell phone. First is a dome light with two integrated map lights for the front seats. Not sure of the RPO code, but it was not widely purchased. I believe it's 82-90, but should fit up to 92. This should fit the original hole in the roof liner, the original dome light bulb, and the original studs that the other dome light uses. Asking $30 shipped.
Second is a horn button, i believe 82-84 Trans Am/Firebird. Very nice condition, looking for $25 shipped.
Always willing to combine shipping and/or product cost, so if you see more than one thing you like, feel free to ask!
Should not have any broken tabs (not counting panel between roof liner and hatch, that may have a few broken screw holes). I will check and confirm condition as soon as i can for you, finals week is killing me. Not to mention i will have to figure out how to get these all boxed up being such a large package just to fit the rear driver side panel alone. Will get back to you ASAP. Thanks for your interest!
What exactly do you need? I have obviously what is pictured, and i may have a few other things, let me know what you are interested in, and i will see what i can do for you. Any confirmation that it works and do you have pictures?? Thanks!
Yea, i got someone doing $20 shipped so that sounds about right for a switch that's 20 years old with an unknown status of usability. I've already sold the black interior i had, and unfortunetely i don't have any after market intakes or ignition parts. I got berlinetta parts, but thats about the biggest ticket items i would really have at the moment. Got a camaro flash light for an overhead console, lol. Other than that, i pretty much deal with used original parts that i have access to in the junk yard. Anything else you can think of that you might need (stock wise), make a small list and we can go from there, other than that i can't think of anything big. Pics (front and back please) to wisniej467@cobleskill.edu. Thanks!
Hey bradley, you have pictures/interest in selling? Just wondering.
To all those waiting for parts, i put all my money on going home today and the poor weather in upstate new york has deterred that. The next time i will be able to make it to my shop will be sunday evening after work, so i will probably be sending out PMs monday morning as i have quite a few parts to pick up and part out. Thanks for your patience and i will get back to those with pictures and PMs. Thanks again!
How much for one of each door latch shipped to 14482? Damn NY weather keeps freezing my latches shut... I'm hoping if I get a spare set, I can have them nicely cleaned and lubed and won't have to worry about it... Other than the fact that the one on the driver's side is FUBARed anyways...
I have the interior, thats $50 plus shipping (not sure of shipping, need zip), i have a non a/c firebird dash with only two guages, so you may need to stick your guages and bezel on it (look at my photobucket link in my signature for that), a dash pad that i could send with that, but it does have a crack down the middle that may be fixable, for daily driver quality, and i've got a set of gray firebird seats. The passenger side and rear are in good shape, but the driver seat had a hole in it that was patched in the correct fabric. It would be alright for a daily driver, but i'm not going to say mint condition on that. Let me know what you're interested in!
__________________ 1988 Bare t-topped Firebird L03/ WC T5/ Open drum 3.08 - - > Gunmetal LT1/T56 powered GTA with LS1 4:10 rear disks to boot.
83 Daytona 500 Trans Am pace car, 1 of 2500 built, will be revived...pics coming soon!
92 Heritage RS Camaro, one of ~8200 in counting, will hopefully be running in time for NYThirdGen 4th of July car cruise on Deer Park Ave, LI.
I have an 85 Z. I'm looking for a temperature gauge, the one in the cluster is NG. I can't seem to find a stock replacement online. If you've got it let me know. My email is slipmahony28@yahoo.com. Also, I'd like to re do the front seats but cannot find stock replacements online. Many of the sites will say they originals, but the pictures don't look llike anything I've ever seen in a camaro. If you've got any advice, I'd appreciate it. Thanks
If you are talking about the seats that say CAMARO CAMARO CAMARO down the front then good luck. There are many sources i've heard of that can get the original material, and then you need to find an upholstery shop to do the rest. Otherwise if you have standard seating, then you can get what looks to be nice factory replacement upholstery with hardware from halks third gen (a biit pricey but good customer service) or Classic Industries that i do believe is priced appropriately. As far as the guage cluster, i will look in the junk yards for your if you would like, otherwise i do not have one at this time. Let me know if you want me to keep an eye out.
I don't have time to read all the comments posted but im just wondering what kind of berlinetta parts are you selling? because i need things like a new head liner, radio pod and stuff like that.
Last edited by rickys69charger; 06-15-2009 at 05:48 PM.
I might have a radio pod, but i cannot guarantee that the tape deck itself works. Also, all headliners are the same from 82-92, but i do not have one at this moment. Anything else that you need, feel free to private message me and i'll see what i can do for you. THanks for your interest.
Oh yeah I am very intrested in some of that stuff PM sent I'll also left my F-body club know about it I have a 88 iroc in midst of resto
Hey I gots a part list for yah if you have'em by the pictures it looks like it. I am looking for stuff not borke or cracked I dun care about dirt
Coolant reservoir
interior door handle covers (bezel)
center console covers (Ashtray holder with ash tray, the plate that goes over the shifter (automatic), and a working glove box lid)
Steering collum cover
Trunk Pull down motor (Functional)
Hood hinges (front)
And the little pin that holds the locking assembly to the key cylinder inside the door, not the big one that holds the cyclinder to the door (Yeah I accedently broke it heh.
Um and a orginial Camaro style radio
Just qoute me a price on all you have of those, I'll offer 75-100 up front minus shipping
Thank you
Last edited by RicerEater; 06-20-2009 at 01:21 PM.
I unfortunetaly do not have any good condition window felts. I actually switched for fourth gen window felts because i didn't have the $70 for two new ones. I'm also using fourth gen trans am mirrors so it looks really natural. Just an idea. Good luck on your search!
I do not have any at the moment, to get best results, I recommend making your own thread and more people will look. I do know you can get new or used, can't remember which, from www.moderndaymuscle.com. They are pricey for the unit though.
__________________ 1988 Bare t-topped Firebird L03/ WC T5/ Open drum 3.08 - - > Gunmetal LT1/T56 powered GTA with LS1 4:10 rear disks to boot.
83 Daytona 500 Trans Am pace car, 1 of 2500 built, will be revived...pics coming soon!
92 Heritage RS Camaro, one of ~8200 in counting, will hopefully be running in time for NYThirdGen 4th of July car cruise on Deer Park Ave, LI.
I'm hoping if I get a spare set, I can have them nicely cleaned and lubed and won't have to worry about it... Other than the fact that the one on the driver's side is FUBARed anyways... 
Oh yeah I am very intrested in some of that stuff PM sent I'll also left my F-body club know about it I have a 88 iroc in midst of resto
KC88GTA 
