Wisconsin Parting out 5 cars loots of interior parts for sell - Page 5 - Third Generation F-Body Message Boards

project91rs · 09-19-2009, 03:34 AM

Hey, I'm looking for a 110ph dash for a 91 RS? Got one...how much? Thanks

This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!

dave mc · 09-19-2009, 10:19 AM

Quote:

Originally Posted by project91rs

Hey, I'm looking for a 110ph dash for a 91 RS? Got one...how much? Thanks

Yes I do I'd like to get around 80 bucks for it?

raceman 3179 · 09-19-2009, 10:47 AM

Hi, I am looking for the vents on each side in the dash, drivers side non t-top pillar molding, rocker panel sill plates all black. let me know if you have any of these left. Thanks

Terry Kennedy · 09-19-2009, 11:08 AM

I need the 2 front female ends of the seat belts in black, if you have them can i get pics and a price. Thanks Terry gen3camaro88@aol.com

dave mc · 09-19-2009, 04:13 PM

Quote:

Originally Posted by Terry Kennedy

I need the 2 front female ends of the seat belts in black, if you have them can i get pics and a price. Thanks Terry gen3camaro88@aol.com

sorry sold all of them

dave mc · 09-19-2009, 04:16 PM

Quote:

Originally Posted by raceman 3179

Hi, I am looking for the vents on each side in the dash, drivers side non t-top pillar molding, rocker panel sill plates all black. let me know if you have any of these left. Thanks

I have the dash vents and the pillar molding in good condition. The only black sill plates I have right now have crackes.

IROC ERIC · 09-23-2009, 11:59 AM

Do you have the fuse box cover for the under dash hush panel for 90-92?

Red87SC · 09-23-2009, 05:23 PM

do you have any hard-top a-pillar trim panels in black or any of the trim pieces that hold the power door lock switch and door handle that would fit in an 87 trans am?

Car has grey interior but i would like black pieces if possible.

dave mc · 09-24-2009, 11:27 AM

Quote:

Originally Posted by Red87SC

do you have any hard-top a-pillar trim panels in black or any of the trim pieces that hold the power door lock switch and door handle that would fit in an 87 trans am?

Car has grey interior but i would like black pieces if possible.

Yes I have it what style door handle trim do you have?

ShootingStar · 09-24-2009, 10:23 PM

Hi there, could you send me prices with shipping to 05732 for:

Camaro Fog light grill (bowtie or Camaro, doesnt matter)

145 or 115 mph speedometer for the 82-89 style Camaro? (single needle preferred)?
---Also, would prefer JUST the 145/115 face over the entire cluster, but not too picky.

Thanks partner!

ttypeterror · 09-25-2009, 11:49 AM

Quote:

Originally Posted by dave mc

I have 5 cars I’m parting 3 with black interiors 1 with tan and 1 with gray. let me know what you need and I’ll get back to you ASAP.

I need a steering column for an 84 z. How much shipped to 66049?

LinuxGuy · 09-25-2009, 05:19 PM

Interested in a Camaro steering wheel. Do you have any? And what styles? Pictures if you do have wheels? Prefer wheel to be in good shape, with working horn button.

Thanks.

dave mc · 09-25-2009, 05:27 PM

Quote:

Originally Posted by ttypeterror

I need a steering column for an 84 z. How much shipped to 66049?

Yes I have a couple of them 90 bucks shipped

Gadp74 · 09-25-2009, 07:29 PM

Looking for black carpet and firewall insulation, roof and door weatherstripping shipped to 33182

firebird formula 89

M&M_GTA88 · 09-27-2009, 07:49 PM

Do you have a tan d/s door handle/armrest for a GTA?

TazCowboy · 09-27-2009, 08:19 PM

I dont have any parts for sale sorry its someone else I asked him for parts. SORRY

M&M_GTA88 · 09-27-2009, 08:25 PM

Do you have a tan d/s door handle/armrest for a GTA?

dave mc · 09-27-2009, 08:28 PM

Quote:

Originally Posted by M&M_GTA88

Do you have a tan d/s door handle/armrest for a GTA?

I saw a tan gta style arm rest the other day when I was looking for something. I don’t remember witch side it was I’ll check it out and get back to you in a day or so. Drop me a reminder if you don’t hear back from me. thanks

DARKmj16 · 09-28-2009, 02:57 AM

wow this is a really long post to read... anywas what i need/ want for my 84 camaro...a ton of those trim screws, the ones that hold the shifter plate and radio plates on, all those. also the ones that hold the shifter boot to the shifter plate. o and some for the gauge cluster. o and also the screws that hold the whole center consle down. (how ever you wana bag em) o and another screw, one that goes to the arm rest, and bout the arm rest you got that thing that goes between the top of the rest and the trim on the door? now what im talking bout? if not ill get a pic.
do you have a t-top bag?
and straps?
any overhead consle for ttops?
the vinyl cargo cover?
driver side ttop a pillar?
any black door panels? standard, no pm or pl
how bout lower center consle with black carpet?
and last black front seats and back seat?
black seat belts?

dont care if they are mint, some slight staining is ok. just basically looking to get my interior back lol.

how much for each shipped to 24015?

91project · 09-28-2009, 04:28 AM

Hey man i'm looking for a headliner for a 91 t top camaro, and the plastic trim piece that goes behind it, color doesn't matter as long as the backing board is in good shape

jessebick · 09-28-2009, 09:40 AM

hey it might be a little to late but i was wondering do you still have the black interior and if it would fit a 1989 Pontiac firebird formula and if so how much were you asking for the set

dave mc · 09-28-2009, 08:14 PM

Quote:

Originally Posted by Gadp74

Looking for black carpet and firewall insulation, roof and door weatherstripping shipped to 33182

firebird formula 89

carpet and insulation 100 shipped
door stripping 30 bucks
did you need t top or hard top stripping?

dave mc · 09-28-2009, 08:16 PM

Quote:

Originally Posted by DARKmj16

wow this is a really long post to read... anywas what i need/ want for my 84 camaro...a ton of those trim screws, the ones that hold the shifter plate and radio plates on, all those. also the ones that hold the shifter boot to the shifter plate. o and some for the gauge cluster. o and also the screws that hold the whole center consle down. (how ever you wana bag em) o and another screw, one that goes to the arm rest, and bout the arm rest you got that thing that goes between the top of the rest and the trim on the door? now what im talking bout? if not ill get a pic.
do you have a t-top bag?
and straps?
any overhead consle for ttops?
the vinyl cargo cover?
driver side ttop a pillar?
any black door panels? standard, no pm or pl
how bout lower center consle with black carpet?
and last black front seats and back seat?
black seat belts?

dont care if they are mint, some slight staining is ok. just basically looking to get my interior back lol.

how much for each shipped to 24015?

I have most of that I'll pm you

dave mc · 09-28-2009, 08:18 PM

Quote:

Originally Posted by 91project

Hey man i'm looking for a headliner for a 91 t top camaro, and the plastic trim piece that goes behind it, color doesn't matter as long as the backing board is in good shape

I don’t like shipping headliners to fragile

dave mc · 09-28-2009, 08:19 PM

Quote:

Originally Posted by jessebick

hey it might be a little to late but i was wondering do you still have the black interior and if it would fit a 1989 Pontiac firebird formula and if so how much were you asking for the set

What all did you need?

The_Phoenix · 09-30-2009, 04:18 PM

http://www.thirdgen.org/techboard/in...nterior-2.html (mint gray firebird interior for sale)

The parts I was requesting are probably sold already correct?

5speed · 10-02-2009, 07:59 PM

looking for the round spacers on the armrest that go behind the single top bolt by the door handle.
Also the plastic trim on the top of the passengers door panel and the lower part of the dash on the passengers side. All in black.

bowtieboy42 · 10-02-2009, 10:43 PM

I know its not int, but do any of the cars have tpi? I'm just looking for a pair of adjustable tps screws and washers. Thanks!

dave mc · 10-04-2009, 06:22 PM

Quote:

Originally Posted by 5speed

looking for the round spacers on the armrest that go behind the single top bolt by the door handle.
Also the plastic trim on the top of the passengers door panel and the lower part of the dash on the passengers side. All in black.

Yes I have all of it.

kzhurley · 10-05-2009, 12:09 AM

You have a set of front stock black carpeted floor mats?And a useable set of lower door seals?Shipping to 44654? Thanks----jim

bowtieboy42 · 10-05-2009, 08:43 AM

Dome light? TPS screws?

5speed · 10-05-2009, 08:55 AM

Quote:

Originally Posted by dave mc

Yes I have all of it.

Are the door and dash pieces crack free? Mine are both cracked..to much of that chevy torque!

if they are good to go..can you pm me a price?
Thanks for the reply.

seanjnl1 · 10-05-2009, 10:48 AM

I am looking for a black coat hook for a 91 RS. The coat hook holds the rear speaker cover in place. I need the passenger side, although I am sure both sides are identical.

Shipping would be to 48842.

Thanks
Greg
gammcc@att.net

The_Phoenix · 10-05-2009, 12:19 PM

Quote:

Originally Posted by The_Phoenix

http://www.thirdgen.org/techboard/in...nterior-2.html (mint gray firebird interior for sale)

The parts I was requesting are probably sold already correct?

If they aren't sold already, I can send out a M.O. today since its payday for $79.85

. Let me know.

Phoenix

DARKmj16 · 10-06-2009, 12:24 AM

Quote:

Originally Posted by dave mc

I have most of that I'll pm you

can i add a heater blower motor with a/c to the list? o and a v6 manual gauage cluster? and any word on the price for it all? shipped to 24015?

!CamaroRS-Dave · 10-06-2009, 01:55 AM

Hey Dave. Do you have a headliner trim piece? Shown in picture below. Any color would be good. Please give me a price with shipping to 48858. Thanks.

afida15 · 10-07-2009, 03:01 PM

do you have any more steering columns. my car is a 89 iroc so if you have one that will plug up right il be interested. do you have any irocz front ground effects?

dave mc · 10-07-2009, 05:01 PM

Quote:

Originally Posted by !CamaroRS-Dave

Hey Dave. Do you have a headliner trim piece? Shown in picture below. Any color would be good. Please give me a price with shipping to 48858. Thanks.

Nothing without a hole or two busted out

dave mc · 10-07-2009, 05:07 PM

Quote:

Originally Posted by afida15

do you have any more steering columns. my car is a 89 iroc so if you have one that will plug up right il be interested. do you have any irocz front ground effects?

Nothing for an 89 right now that’s a one year only column first year for vats and no airbag. if you have bypassed your vats you can use any older column?

eXesiv|83ta · 10-07-2009, 05:43 PM

Hey i'm looking for a drivers side rear quarter in tan. The interior piece that runs from the pillar to the rear end and goes over the wheel well. Thanks!

dave mc · 10-07-2009, 07:11 PM

Quote:

Originally Posted by eXesiv|83ta

Hey i'm looking for a drivers side rear quarter in tan. The interior piece that runs from the pillar to the rear end and goes over the wheel well. Thanks!

What year?

eXesiv|83ta · 10-07-2009, 11:57 PM

the car is an 83.

5speed · 10-08-2009, 09:26 AM

Quote:

Originally Posted by 5speed

Are the door and dash pieces crack free? Mine are both cracked..to much of that chevy torque!

if they are good to go..can you pm me a price?
Thanks for the reply.

Can you shoot me a price Dave?

dave mc · 10-08-2009, 10:17 AM

Quote:

Originally Posted by eXesiv|83ta

the car is an 83.

Yes I have one 25.00 + shipping

eXesiv|83ta · 10-08-2009, 12:02 PM

Sweet, would it be possible to get a picture and what is the shipping to 49329?

Thanks!

afida15 · 10-08-2009, 02:22 PM

im not using vats. my car is a 350 car and was converted to a five speed so im really trying to find a manual column but it doesnt matter. im putting a carbed motor in it so i dont need the vats. ive got a grant steering wheel so a steering wheel isnt important either. the column i got now wobbles.

55ChevyMan · 10-08-2009, 02:50 PM

wanted 3 inch catalytic converter I need the conector falange it doesn't have to be great are any good all I need is the rear 3' inch falange let know how much you want for it

dave mc · 10-08-2009, 07:42 PM

Quote:

Originally Posted by eXesiv|83ta

Sweet, would it be possible to get a picture and what is the shipping to 49329?

Thanks!

shipping is going to run about 30 to 50 bucks depending on how fast you want it.

dave mc · 10-08-2009, 07:48 PM

Quote:

Originally Posted by afida15

im not using vats. my car is a 350 car and was converted to a five speed so im really trying to find a manual column but it doesnt matter. im putting a carbed motor in it so i dont need the vats. ive got a grant steering wheel so a steering wheel isnt important either. the column i got now wobbles.

I have a manual column out of a 84 for 100 bucks I also have a couple of auto columns from an 87 and a 85 for 70 bucks

dave mc · 10-08-2009, 07:49 PM

Quote:

Originally Posted by 55ChevyMan

wanted 3 inch catalytic converter I need the conector falange it doesn't have to be great are any good all I need is the rear 3' inch falange let know how much you want for it

I'll take a look