You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Parting out 1992 firebird with a clean tan cloth interior, Headliner is mint, driver seat has one rip, console, shift plate, and radio pod are in great shape, door panels are in awesome shape as well. All plastics seem to be there and in-tact. 125 MPH speedometer, cracked dashpad. Non Power locks, windows, hatch release, etc.
See the Exterior parts sale forum for other parts from this car.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Sponsored Links
Registered users do not see this ad. Click here to register for free!
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
I need a driver side tan seatbelt, do you have one in decent condition? how much?
Its there and in good shape, just real dirty.
More pics, This car has the orange Gear shift indicator that shows you what gear you are in. It has one small crack, not very noticable.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
More pics. Toss me some offers, Most of these parts are in awesome shape.
And, these have to be rare. I know that sunvisors with mirrors are uncommon, but I have NEVER seen them with mirrors that have doors over them.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Some prices I am looking to get are:
All prices: OBO!
Door panels (complete): $100 + Shipping
Seats (all): $75 Picked Up
Center console: $50 + Shipping
Shift plate: $50 + Shipping
Map pouch: $5 + Shipping
Various Plastic Parts: Offer
Headliner: $60
Sunvisors with mirrors: $45 + Shipping
Power Mirror: $30 + Shipping
Feel free to offer on anything, Im very negotiable.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Sold:
Lower console
Shift knob
Sill Plates
Radio Face Plate
Rear Headiner trim piece
Probably sold:
Console lid
Front seat belt receptacles
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
by any chance would this headliner fit on an 88 iroc hardtop?
Yes, It would.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
If the sale on the front seat belt receptacles doesn't go through I'll take them if the plastic sleeves are intact.
Alright, I will let you know.
up.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
how much for the headliner and visor/mirrors shipped to houston?
I don't know how to ship a headliner, and the visors, $40 shipped.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Did you ever sell the front seat belt receptacles? I'm still interested. Pics? Thanks.
I did not. The best pic I have of them is posted above. They arent perfect, but they are pretty nice, only small cracks on the corners. LMK if you want better a better pic. Thanks.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Sorry, been real busy. The car is an hour away from where I live, so I cant just drive up there to take some pice, but the next time i go, I will pull them and you get you some pics if you still need them.
Thanks,
Bradley.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
If you can get pics of them that would be great. Let me know how much you want shipped to 48433. Thanks again.
Sorry, been real busy. The car is an hour away from where I live, so I cant just drive up there to take some pice, but the next time i go, I will pull them and you get you some pics if you still need them.
Thanks,
Bradley.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more
Thanks Bradly, I have been slowed down with shoulder surgery, do you have an idea how much u will want for the pair? and if they work correctly? I bought one off ebay that dont work correct, it dont stop when you pull it out its floppy!
benben-
I am not sure what parts you are looking for, if your looking for the sunvisors as well, than they work great, the hinges hold true, just the fabric is sagging. Let me know and I'll get back with you, thanks.
__________________ Currently Building: 1987 Formula 350:
350 SBC bored to 357, aluminum pistons, PM rods, Full roller block. 700r4 With shift kit, Lakewood Lower control arms and adjustable panhard bar, Borg Warner 9bolt posi Rear, 4 wheel disc brakes, KYB GR2 Shocks/Struts, AG lowering springs, UMI Sub-frame connectors, Full Energy suspension bushings, 36/24 Swaybars, and much more