08-16-2009, 09:35 PM
#1 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
(SOLD) Parting out '92 Z28 tpi 5-speed (SOLD)
CAR IS GONE, ALL PARTS SOLD. CLOSE THREAD.
I am parting out a '92 Z28 that I just purchased. It is an original 5-speed car and tpi. has a 5.7L tpi in it now. original 5.0 car. t-tops in good shape, interior is ok, but it has been outside for 2 months with pass window down and not covered. some console trim panels are missing or broken. car was hit in RF, front nose is wasted, pass fender and door are trashed, ground effects are junk on pass side from rear tire forward. has good hood and "blisters". car is teal in color. rear bumper cover is good, paint is faded. interior is gray and black. REAR SPOILER IS SOLD. good tail lights, engine runs real strong, no smoke, fires right up, idles smooth. serp belt setup, wheels look pretty good, clearcoat is starting to flake a little. rf has very small lip damage, rf wheel has some cosmetic damage, took to a shop and had them check for out of round. all ok, true and straight. have many many pictures on photobucket. e-mail for other parts, whole car must go. will not sell as whole, unless price is right. NO TITLE. http://s592.photobucket.com/albums/t...bum_view_click
serp belt setup with all accessories and pulleys. no smog pump pulley. $150
too much other stuff. shipping extra for larger stuff.
sold stuff; wheels, rear spoiler, tpi setup and harness, cooling fans and harness, radiator, emblem on top of nose, driveshaft, rear diff, t-tops, engine and trans assy, tail lights, pedals, hydraulics for clutch, rear emblems, rocker emblem.
ALL PRICES ARE NEG, MAKE OFFER. VERY MOTIVATED SELLER.
__________________
'87 GTA hardtop, 385 DFI, trickflow heads, 11.3:1 cr, T-56, BMR susp, c6 z06 brakes front, ls1 4th gen rear, 18" H.R.E. wheels, 275/35 front, 335/30 rear.
(sold)'86 Iroc-z hardtop, 350 carb, T-5, ls1 front brakes, 9-bolt posi disc 3.70 rear, HID headlights, daily driver.
Last edited by luke j; 07-14-2011 at 09:36 PM .
08-20-2009, 10:17 AM
#2 Senior Member
Join Date: May 2002
Location: Oklahoma
Posts: 1,019
Car: 1991 Camaro Z28
Engine: L98 5.7 V8 TPI
Transmission: 700R4
Re: Parting out '92 Z28 tpi 5-speed
__________________
1991 Camaro Z28 | 40K Original Miles | GMMG Chambered Catback
08-20-2009, 11:20 AM
#3 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
__________________
'87 GTA hardtop, 385 DFI, trickflow heads, 11.3:1 cr, T-56, BMR susp, c6 z06 brakes front, ls1 4th gen rear, 18" H.R.E. wheels, 275/35 front, 335/30 rear.
(sold)'86 Iroc-z hardtop, 350 carb, T-5, ls1 front brakes, 9-bolt posi disc 3.70 rear, HID headlights, daily driver.
08-21-2009, 01:36 PM
#4 Member
Join Date: Jun 2003
Location: Nebraska
Posts: 204
Car: 1986 Camaro SC
Engine: 305, AKA 30WHY
Transmission: 700R4
Re: Parting out '92 Z28 tpi 5-speed
What shape is the grill in? Price? Thanks much.
08-21-2009, 06:06 PM
#5 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Good shape, no cracks or anything, paint is faded on bowtie, has 2 holes drilled in back of bottom for fog lights. $40 plus shipping. One other guy asked about it locally, if I do not hear back from him it is yours, if price is ok. Previous owner also drilled 3 small screws into bottom edge of panel, you can see in pic.
__________________
'87 GTA hardtop, 385 DFI, trickflow heads, 11.3:1 cr, T-56, BMR susp, c6 z06 brakes front, ls1 4th gen rear, 18" H.R.E. wheels, 275/35 front, 335/30 rear.
(sold)'86 Iroc-z hardtop, 350 carb, T-5, ls1 front brakes, 9-bolt posi disc 3.70 rear, HID headlights, daily driver.
Last edited by luke j; 09-30-2009 at 04:20 PM .
09-27-2009, 11:51 AM
#6 Junior Member
Join Date: Oct 2007
Posts: 3
Re: Parting out '92 Z28 tpi 5-speed
Do you have a fuse panel cover and if so how much for it?
09-27-2009, 06:00 PM
#7 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Do you want the little cover "door" that comes off to get to fuses or the entire cover panel for under the dash? $10 shipped for first, $20 shipped for second.
__________________
'87 GTA hardtop, 385 DFI, trickflow heads, 11.3:1 cr, T-56, BMR susp, c6 z06 brakes front, ls1 4th gen rear, 18" H.R.E. wheels, 275/35 front, 335/30 rear.
(sold)'86 Iroc-z hardtop, 350 carb, T-5, ls1 front brakes, 9-bolt posi disc 3.70 rear, HID headlights, daily driver.
Last edited by luke j; 09-27-2009 at 06:04 PM .
09-27-2009, 08:15 PM
#8 Supreme Member
Join Date: Dec 2008
Location: Norwalk, CA
Posts: 2,033
Car: 91 RS &91Z28
Engine: 305tbi &305 tpi
Transmission: 700r4 2500TCI stall &700r4 stock
Axle/Gears: 2.73 &3.73
Re: Parting out '92 Z28 tpi 5-speed
How much for the driver side tail light shipped to 90650
09-29-2009, 10:08 PM
#9 Supreme Member
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 5,570
Car: 1987 Firebird... in pieces.
Engine: 3.1L V6 LH0 soon to be 3100
Transmission: Borg-Warner T-5
Axle/Gears: 2HL 3.42 open
Re: Parting out '92 Z28 tpi 5-speed
I'm looking for the bracket holding the ECM under the dash on the passenger's side, IF the car has or had the 730 ECM.
09-30-2009, 07:21 AM
#10 Junior Member
Join Date: Jun 2009
Posts: 6
Re: Parting out '92 Z28 tpi 5-speed
I need the plastic cover that goes under the steering wheel/colum u got it and how much
09-30-2009, 03:25 PM
#11 Junior Member
Join Date: Apr 2009
Location: Oxford Indiana
Posts: 6
Car: 1987 Iroc-Z
Engine: 355
Transmission: T-5 borg warner
Axle/Gears: 3:45
Re: Parting out '92 Z28 tpi 5-speed
09-30-2009, 04:13 PM
#12 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Quote:
Originally Posted by
tonymemphis I need the plastic cover that goes under the steering wheel/colum u got it and how much
$20 shipped.
09-30-2009, 04:15 PM
#13 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Quote:
Originally Posted by
JR350tpi How much for the driver side tail light shipped to 90650
Sold, sorry
09-30-2009, 04:16 PM
#14 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Quote:
Originally Posted by
Maverick H1L I'm looking for the bracket holding the ECM under the dash on the passenger's side, IF the car has or had the 730 ECM.
I think I sold it with ecm, but I will check.
09-30-2009, 04:51 PM
#15 Junior Member
Join Date: Jan 2008
Location: Under the hood trying to find where the motor goes!
Posts: 21
Car: 89GhostRS
Engine: SB
Transmission: 700R4
Axle/Gears: Ford 9/4:10
Re: Parting out '92 Z28 tpi 5-speed
Luke J, where in Indiana are you located? I need lower spoilers front and dr/pass side as well.
Last edited by Shon Webb; 09-30-2009 at 05:19 PM .
09-30-2009, 04:51 PM
#16 Want a title? Post!
Join Date: Jun 2009
Posts: 0
Re: Parting out '92 Z28 tpi 5-speed
Are the tail lights sold? Is the interior leather or cloth?
09-30-2009, 04:55 PM
#17 Member
Join Date: Jul 2008
Posts: 102
Re: Parting out '92 Z28 tpi 5-speed
Do you have the plastic pieces that go on the door, on both sides of the window? I need them for both doors please. How much shipped to 32810?
09-30-2009, 05:06 PM
#18 Junior Member
Join Date: Jun 2009
Posts: 6
Re: Parting out '92 Z28 tpi 5-speed
if you have pictures thatll be swell does the fuse box cover come with that
09-30-2009, 05:07 PM
#19 Junior Member
Join Date: Jun 2009
Posts: 6
Re: Parting out '92 Z28 tpi 5-speed
that and the fuse box door i need your paypal also do u have a number
09-30-2009, 09:48 PM
#20 Senior Member
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,154
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Parting out '92 Z28 tpi 5-speed
Would you be willing to mail me the TTop hooks that attach to the very rear of the car for $4?
09-30-2009, 10:22 PM
#21 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
CamaroRUS- that sounds fine, as long as they are mounted to the body. the t-tops are sold.
Tail lights are sold, interior is gray cloth.
bcfipp-I have pics of them, pm me your e-mail addy.
tonymemphis-pm sent.
Last edited by luke j; 09-30-2009 at 10:26 PM .
10-01-2009, 07:02 PM
#22 Senior Member
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,154
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Parting out '92 Z28 tpi 5-speed
Thanks, they are not on the ttops. They are the 4 brackets the ttop bag mounts to in the rear hatch area.
Two on the "top" inside the car above the fuel tank and 2 at the very rear of the car. I can try to find a pic if you need clarification.
I appreciate it a lot, whats your Paypal?
10-01-2009, 09:02 PM
#23 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
__________________
'87 GTA hardtop, 385 DFI, trickflow heads, 11.3:1 cr, T-56, BMR susp, c6 z06 brakes front, ls1 4th gen rear, 18" H.R.E. wheels, 275/35 front, 335/30 rear.
(sold)'86 Iroc-z hardtop, 350 carb, T-5, ls1 front brakes, 9-bolt posi disc 3.70 rear, HID headlights, daily driver.
10-02-2009, 08:18 AM
#24 TGO Supporter
Join Date: Jun 2002
Location: AR
Posts: 6,773
Car: 1991 Camaro RS Vert
Engine: 350 S-TPI
Transmission: T5
Axle/Gears: GU5/G80/J65
Re: Parting out '92 Z28 tpi 5-speed
Drivers Door only GFX piece.
Also, behind the door handle on the inside is a little black appearence piece, need one of them.
Shipping to 72116 bis, or 72120 home.
10-02-2009, 08:41 AM
#25 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Quote:
Originally Posted by
Dale Drivers Door only GFX piece.
Also, behind the door handle on the inside is a little black appearence piece, need one of them.
Shipping to 72116 bis, or 72120 home.
The gfx on the driver's door is the wrong one, you can see it in the pictures. It is off of an '87ish car. The door handle piece I do have.
10-02-2009, 10:05 AM
#26 TGO Supporter
Join Date: Jun 2002
Location: AR
Posts: 6,773
Car: 1991 Camaro RS Vert
Engine: 350 S-TPI
Transmission: T5
Axle/Gears: GU5/G80/J65
Re: Parting out '92 Z28 tpi 5-speed
I didnt see that in the pictures. Sorry.
Door handle piece is not worth shipping alone.
Thanks for the response.
10-07-2009, 07:23 AM
#27 Senior Member
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,154
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Parting out '92 Z28 tpi 5-speed
Luke, I sent pmt a couple days ago. Did you have a chance to get the pieces shipped?
10-07-2009, 08:27 AM
#28 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Sorry, I thought I replied to you already. I am shipping out today.
__________________
'87 GTA hardtop, 385 DFI, trickflow heads, 11.3:1 cr, T-56, BMR susp, c6 z06 brakes front, ls1 4th gen rear, 18" H.R.E. wheels, 275/35 front, 335/30 rear.
(sold)'86 Iroc-z hardtop, 350 carb, T-5, ls1 front brakes, 9-bolt posi disc 3.70 rear, HID headlights, daily driver.
10-07-2009, 05:55 PM
#29 Senior Member
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,154
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Parting out '92 Z28 tpi 5-speed
__________________
1991 Pearl White Z28 383
3265 lbs.
305 TPI = 9.17@81
10-16-2009, 11:25 PM
#30 Junior Member
Join Date: Apr 2008
Location: southwest Chicago suburbs
Posts: 3
Car: 91 Red RS vert, 95 Silver B4C
Engine: 355 cubic inch, 350 LT1
Transmission: T56, T56
Axle/Gears: 3.42, 3.42
Re: Parting out '92 Z28 tpi 5-speed
Have you sold the clutch and brake pedals? Is the shifter trim plate and shift bootfor sale? How much to 60435.
Thanks
10-17-2009, 02:29 AM
#31 Junior Member
Join Date: Apr 2009
Location: South Carolina
Posts: 93
Car: 1992 Camaro "SS Z03"
Engine: 383 Stroker
Transmission: '96 1LE T-56
Axle/Gears: Borg-Warner 9-bolt
Re: Parting out '92 Z28 tpi 5-speed
Hi, what shape are the carpet sides on the center console? It looked good on the drivers side. Cost and shipping to 33050, Florida? Thank you!
10-19-2009, 07:10 PM
#32 Member
Join Date: Feb 2008
Location: newfoundland
Posts: 318
Car: 1989 camaro rs
Engine: zz383
Transmission: 5 speed
Axle/Gears: 3:73
Re: Parting out '92 Z28 tpi 5-speed
how much for the drive shaft?
10-19-2009, 08:45 PM
#33 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Quote:
Originally Posted by
RS Vert 91 Have you sold the clutch and brake pedals? Is the shifter trim plate and shift bootfor sale? How much to 60435.
Thanks
all sold, sorry.
10-19-2009, 08:46 PM
#34 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Quote:
Originally Posted by
Blew-By-You Hi, what shape are the carpet sides on the center console? It looked good on the drivers side. Cost and shipping to 33050, Florida? Thank you!
console sold, sorry.
10-19-2009, 08:47 PM
#35 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Quote:
Originally Posted by
camarozz383 how much for the drive shaft?
Sold, sorry.
10-19-2009, 08:51 PM
#36 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Only thing left is serp setup and some interior parts.
__________________
'87 GTA hardtop, 385 DFI, trickflow heads, 11.3:1 cr, T-56, BMR susp, c6 z06 brakes front, ls1 4th gen rear, 18" H.R.E. wheels, 275/35 front, 335/30 rear.
(sold)'86 Iroc-z hardtop, 350 carb, T-5, ls1 front brakes, 9-bolt posi disc 3.70 rear, HID headlights, daily driver.
12-22-2009, 05:28 PM
#37 Senior Member
Join Date: Oct 2003
Location: Houston
Posts: 296
Car: 1992 25th Ann. Z28
Engine: 5.7 TPI - Stock
Transmission: th700 r4
Axle/Gears: 3.23
Re: Parting out '92 Z28 tpi 5-speed
Here are a cple things I need if u have them
Lower driver side GFX
Fuel tank
How much shipped to 77373?
Thanks
__________________ 92 5.7 TPI -Energy Suspension poly's - Eibach launch springs- Moog suspension components- Hooker 2056 headers - Magnaflo dual cat set-up - Flowmaster catback-KYB shocks/struts- K&N with airfoil- ported plenum- 700r4 rebuilt - Hotchkis adj Panhard
12-22-2009, 09:03 PM
#38 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Quote:
Originally Posted by
hitman Here are a cple things I need if u have them
Lower driver side GFX
Fuel tank
How much shipped to 77373?
Thanks
Sorry, car is at scrap yard. I did keep the lower gfx. But that's a big negative on the tank. $40 shipped on gfx, paypal only.
12-28-2009, 03:19 PM
#39 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
Actually, I got a better look at the gfx. It has some damage, If you want it, just pay for shipping. I will get some pics for you if you want.
__________________
'87 GTA hardtop, 385 DFI, trickflow heads, 11.3:1 cr, T-56, BMR susp, c6 z06 brakes front, ls1 4th gen rear, 18" H.R.E. wheels, 275/35 front, 335/30 rear.
(sold)'86 Iroc-z hardtop, 350 carb, T-5, ls1 front brakes, 9-bolt posi disc 3.70 rear, HID headlights, daily driver.
12-30-2009, 07:12 PM
#40 Member
Join Date: Sep 2009
Location: Norwalk, CA
Posts: 383
Car: 1983 Z-28
Engine: 5.7 L
Transmission: T-5
Re: Parting out '92 Z28 tpi 5-speed
how much 4 the stererin wheel?...
07-04-2011, 07:30 PM
#41 Junior Member
Join Date: May 2010
Location: O'hare
Posts: 68
Car: 91 Z28
Engine: Mild Mod 5.0TPI
Transmission: Stock W/Kit
Axle/Gears: Stock
Re: Parting out '92 Z28 tpi 5-speed
07-04-2011, 10:50 PM
#42 Member
Join Date: Feb 2001
Location: indiana
Posts: 117
Car: '87 GTA hardtop, '86 IROC hardtop
Engine: 385 DFI, 350 carb
Transmission: T-56, T-5
Axle/Gears: ls1 torsen 10-bolt, 9-bolt disc
Re: Parting out '92 Z28 tpi 5-speed
I will check, but don't get your hopes up.
07-05-2011, 11:32 AM
#43 Junior Member
Join Date: May 2008
Location: Tampa Florida
Posts: 16
Car: 1992 Z28 Convertible
Engine: 305
Transmission: auto
Re: Parting out '92 Z28 tpi 5-speed
window switches to 33542 ??
07-05-2011, 11:32 AM
ThirdGen
1992 Camaro
Paid Advertisement
Tags 1986 , 1992 , 350 , 92 , blown , camaro , door , removal , sale , speed , tops , tpi , tranny , wheels , z28
Thread Tools Search this Thread
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off